Posted by gtfreeflyer |
Jan 21, 2009 @ 03:01 PM | 19,128 Views
This blog is dedicated to my build and flying experience with this Twin Otter.
Motors: Turnigy 2213, 1050kv, 16A cont, 19A peak, 56g, 27.6x32mm, 3.175mm shaft
Props: APC Electric 9x6, or 10x5 for payloads. 10x5 is approx. 10mph less than the 9x6, but higher thrust at low speeds.
ESC: Turnigy Plush 30A
LiPo: One 3s 5000 for 15 minutes, or one 3s 2200 for 6 minutes or when carrying payloads.
Aileron Servos: Align DS415M
Elevator and Rudder Servos: Hobbico CS-17
Steering Servo: Futaba FP-S133
Aileron Gyro: Spartan Quark (headlock gyro)
Elevator and Rudder Gyros: Turnigy TG380 (rate gyros)
Tx/Rx: Futaba 7c with 617FS