HobbyKing.com New Products Flash Sale
Wuwu's blog
Posted by Wuwu | Aug 10, 2011 @ 07:19 AM | 4,377 Views
I wanted to build a multi-function rc plane to the AP, FPV and cargo.
In the first version was to be a pusher configuration (like Predator).
For this reason, rear was reinforced.
In the meantime, I changed my mind and decided to mount two motors on the wings.
Due to changing the center of gravity, I moved wing (a little) forward, leaving rear engine mount (just in case ).
--------------------------
48" WS
2x Emax GF2210/20
2x 3 blade GWS HD7035X3 propeller for smooth flying or GW/HD8060 for speed
2x 30A ESC
Li-po 3S1P 1800 - 2200mAh
v-tail mixer - not necessary only for differential thrust
4x 9 gram servos
AUW 1000-1100g - It is a little too heavy, but durable.
--------------------------
Twin Motor RC Plane short flight.
Twin Motor RC Plane short flight. (3 min 0 sec)

--
Twin Motor RC Plane first flight
...Continue Reading
Posted by Wuwu | Sep 03, 2010 @ 08:31 PM | 6,536 Views
Making of BB.
** Blu-Baby Primary Trainer ** Plans, Pics and Fun!
These are the plans for the BB42
Setup:
Emax BL2210/30
Propeller GWSEP9050HD or GWSSF9047, APC9045E, APC9060E
Powered by 3 cells Li-Po 1000-1800mAh
Cheapest ESC 30A with built in 2A BEC
Two 9g TowerPro servos.
------------------------------------------------------------------
YouTube Video
First flight my Blue Baby 42 KFm3
First flight my Blue Baby 42 KFm3 (4 min 7 sec)
...Continue Reading
Posted by Wuwu | Sep 02, 2006 @ 11:41 AM | 10,935 Views
Plany pobrałem ze strony:
Here's a link to the plans:
Electric Orange - J3 Cub "Park Trainer"

Wydrukowałem plany.
I printed the plans.

Wyciąłem wzorce, obrysowałem na piance i zabrałem się do cięcia pianki nożem do tapet.
I cut all my templates out.
I have outlined templates.
I cut foam with the sharp wallpaper knife.

Jako materiał użyłem pianki IZO-FLOOR 6mm marki Arbiton.
Built in green 6mm foam.

Do klejenia użyłem kleju UHU POR.
All I have to do is glue her all together.
I used UHU POR glue for my cub....Continue Reading