HobbyKing.com New Products Flash Sale
siryan's blog
Posted by siryan | Sep 02, 2008 @ 11:42 PM | 4,355 Views
Trex se

hs 65
align motor
align 35 esc

Just Needs a one way shaft adapter
Gears are brand new
Posted by siryan | Aug 23, 2008 @ 12:59 PM | 4,180 Views
Trex 450 xl with modified frame for direct linkage


3 hs56
telebee gyro
nib align 35
3550 kv align motor
Posted by siryan | Aug 13, 2008 @ 08:15 PM | 4,393 Views
Here are some pics of the md500 on the trex already test hovered it but haven't seen actual flight.
Posted by siryan | Aug 04, 2008 @ 06:01 AM | 4,222 Views
Side project while waiting for my heliartist fuse
Posted by siryan | Jul 31, 2008 @ 12:04 AM | 3,997 Views
here are the measurements for an e voyager im planning to convert into scale
Posted by siryan | Jul 30, 2008 @ 03:09 PM | 4,204 Views
Trex cde old version another impulse buy
Posted by siryan | Jul 04, 2008 @ 08:41 AM | 4,185 Views
Another addition to the fleet sold my king 2 and bought a cde trex from estarter
here
Posted by siryan | Jun 27, 2008 @ 01:12 PM | 4,485 Views
hs55 axi 22088/20
Posted by siryan | Jun 23, 2008 @ 12:19 AM | 4,871 Views
Bought this from the ad and was advertised as a mangled trex seller was giving it away but for local pick up only. convinced him to sell it to me and ship.

got it with 2 stripped servos and some broken tail bit stuff.

kontronik jazz esc ( good stuff )
GY240
hs55's cyclic
some hitech mg wing servo for the tail



well here it is now after rebuild not bad for an 80 dollar trex.
all i did was buy a new canopy some tail stuff to get it flying, since then i just added some upgrades like new canopy new blades etc.
Posted by siryan | May 30, 2008 @ 01:20 AM | 5,750 Views
I just found out that the stock landing gear on almost all my gws planes were weak so i made some minor reinforcements on their landing gear using a 3.5mm carbon rods hopefully it'll work. being a noob myself i can land it pretty decently but almost all of the thin wires will fold and results in a minor crash.
Posted by siryan | May 27, 2008 @ 08:29 PM | 5,506 Views
after A succesful back to back maiden of my p51 and the corsair i decided to open another kit (my last one) Its a TM400 i have already finished attaching the ailerons and the elevator. Painted it really thin with testors metallic gray just to get rid of the white styro look. Some pics
Posted by siryan | May 26, 2008 @ 03:27 AM | 4,340 Views
my gws corsair Had a problem seeing it in the air because of the dark color otherwise it flies really good.
Posted by siryan | May 18, 2008 @ 12:16 AM | 4,272 Views
pics of my latest build not yet finished though have no idea that putting electronics on this plane would be a pain in tha
Sticky: New estarter
Posted by siryan | May 16, 2008 @ 01:27 AM | 4,738 Views
Just finished building my estarter i better put some pictures here before i destroy her on the maiden flight note the 3m packing tape all over for reinforcement on critical damage prone area. I hope i didnt mess it up with these added weights. This is my 1st 4 channel plane i used the 4 servo configuration buried a servo on each wing. Hope that the cheap suppo motor 1800kv / esc 18 amp combo will hold using a 3s lipo and an 8x6 slow flier prop.
Posted by siryan | Apr 01, 2008 @ 08:25 PM | 5,811 Views
000
ss
Posted by siryan | Dec 15, 2007 @ 05:49 AM | 2,942 Views
futaba 7chp