New Products Flash Sale
punkindrublik's blog View Details
Posted by punkindrublik | Oct 27, 2014 @ 05:56 PM | 6,416 Views
It's about time, huh?

Fully capable 32 bit board that runs Baseflight, Cleanflight and Harikari beautifully. You might also have heard of these as Flip32s, but the DragonFly is here to stay!

These boards look awesome. Pick one up now at!




Posted by punkindrublik | Oct 22, 2014 @ 05:12 PM | 6,117 Views
It's about time, huh?

Fully capable 32 bit board with baro and mag. Runs Baseflight, Cleanflight and Harikari beautifully. You might also have heard of these as Flip32s, but the DragonFly is here to stay!

These boards look awesome. Pick one up now at!




Posted by punkindrublik | Oct 16, 2014 @ 06:19 PM | 5,902 Views
Yup, they're now in stock. Introductory price of $19 per motor (it may stay the same price, "introductory" just sounds cool )


Just a tad bigger than a SunnySky 2204 but puts out over 30% more power! Plus it uses less amps per gram of thrust!

SS 2204 with 5x3 HQ prop on 12.7v full throttle, 6.6a: 240g of thrust
MRM 2204 with 5x3 HQ prop on 12.7v full throttle, 8.2a: 315g of thrust

Factory balanced with Japanese bearings.
And a feature I really like, the c-clip is countersunk, so you don't need a hole or an X-mount. They'll mount to anything flat.

This is one sexy motor!

MRM Mini Titan 2204-2300kv
150mm wires
5mm shaft

We'll have specs and charts (and better pictures) up shortly, I just got them an hour ago

Yer gonna love em! 1806, 2208, 2212 and 2216 to come!
Posted by punkindrublik | Oct 09, 2014 @ 06:25 PM | 5,245 Views
These just came in today. The classic KK2.1.5 is now available at!

$25 each and shipped within 24 hours. SAME DAY SHIPPING if ordered early enough!

These boards come preloaded with Steveis V1.18S1 Pro, or V1.17S1 Lite firmware.
A donation to Steveis' favorite charity and Rolf Bakke is provided for each sale!

INCLUDES straight OR 90 pins, plus our FREE SOLDERING SERVICE.
(just make sure you check the option box )

Posted by punkindrublik | Oct 08, 2014 @ 05:14 PM | 5,443 Views
We've got cool new stuff showing up just about every day
Posted by punkindrublik | Oct 05, 2014 @ 05:02 PM | 6,137 Views
Here's a sneak peak of what we've got coming this month!
Just a tad bigger than a SunnySky 2204 but puts out over 20% more power!
Factory balanced with Japanese bearings.

MRM Mini Titan 2204-2300kv

Yer gonna love em! 1806, 2208, 2212 and 2216 to come!
Posted by punkindrublik | Oct 03, 2014 @ 03:22 AM | 6,306 Views
Check this out!
Our new DragonFly32 Pros are being shipped right now!
Posted by punkindrublik | Sep 10, 2014 @ 11:01 PM | 5,349 Views
You heard right. If you need multirotor equipment, be sure to check my new store:

I literally just opened the doors last night (9/9). I'm doing a VERY soft opening to make sure that we have everything dialed and will be ready for busier times.

You might recognize quite a few of the products from another popular site out there, but we offer these with my known service and my partner's amazing technical knowledge. PLUS, we will provide UBER FAST SHIPPING, fast e-mail replies and superb support.


LOTS of new products to come, I'm entering them in daily. So please take a gander when ya get a chance.

And feedback is most welcome.

Thanks everybody!

Posted by punkindrublik | Mar 24, 2014 @ 01:22 AM | 9,925 Views

Okay, so other than putting some firmware on the OSD (took a little while to realize that's why my picture was funny), this puppy is ready to go. This thing is gonna be a rocket once I switch to 4s.

Plates, tubes and carbon courtesy of awspider (thanks!)
Naze 32 w/GPS
SunnySky 2216-1250s
Afro Slim 20s
FrSky X8-r Rx
Boscam Cobra HD DVR/FPV cam
Boscam 400mW VTx
MinimOSD from WiteSpy
Distribution board with dual BECs (5.5v,12v)
RCTimer 9x5 Carbon Props
Nano-Tech 3300 3s Lipo

AUW 1150g
Posted by punkindrublik | Feb 28, 2014 @ 06:19 AM | 9,788 Views
This is for the few that have shown interest in seeing my new haul.

And yes, I realized after I watched it that I called the NorthStar a "Vortex".

And the one I couldn't remember was the L-19

My Movie (6 min 22 sec)

Posted by punkindrublik | Feb 11, 2014 @ 05:44 PM | 10,177 Views
Just saw this a couple of weeks ago and thought it would be perfect for lipos as it looks like 2 or 3 should stack nicely in a standard aluminum case. At only $8 for two plus fair shipping, I figured I'd share (I bought 4).
Shipped from within the US.

As you can see, I can stack 2-4 (depending on batt size) of these loaded with batteries on both sides in a standard aluminum case. The one side I pictured even has room for a few more
Posted by punkindrublik | Oct 04, 2013 @ 02:55 AM | 12,270 Views
I actually finished this months ago, but am just now getting around to posting it. I have a couple more finished projects to post as well.

The first thing I did when I jumped back into this hobby a few months ago, was get me one of them fancy chargin stations I see ya'll got out there. My two 109's in a Tx case with a battery just wasn't cutting it anymore.
So, here's my first completed project during my comeback.

1x 25 amp MeanWell power supply. Hard mounted.
1x 35AH Chrome SLA Battery (not pictured)
2x Astro 109s - I can charge up to 16 amps with this pair. Simple as simple gets. Velcro mounted (the real stuff)
1x Duratrax ICE (soon to be replaced with an Onyx 235). Hard mounted.

Main Board. Hard mounted. Includes -
  • AC/DC/OFF switchable
  • Switches for all chargers with room for more
  • 2x Parallel boards - 7 deans outputs each. Velcro mounted.
  • 2x Astro Blinky balancers - one connected to each board. Velcro mounted.
  • 1x Servo 5/6v tester. Velcro mounted. (later addition, I'll add another pic soon)
  • 1x 5/6v switchable output w/retractable servo lead (male and female)
  • 1x 12v banana plug output
  • Digital voltage readout for PS, DC input and 5/6v output
Fused throughout

When I swap out the Ice for the Onyx, I'll also be adding a LifeSource AC/DC charger and another switch on the main board for it. I decided to go LiFe for my Rx batteries in my gassers and this will give me a quick-charge option for in between flights.
Posted by punkindrublik | Jul 30, 2013 @ 05:24 PM | 24,121 Views
So I don't like taking the cover off to charge my HK 1500mah LiFe packs. I came up with this mod to make charging the battery within the transmitter, so no more battery removal.

PLEASE DO NOT ATTEMPT THIS IF YOU ARE NOT COMPLETELY COMFORTABLE WITH A SOLDERING IRON. You will be working on sensitive electronics and could possibly damage or destroy your transmitter and/or void any warranty.


That being said, the first thing you need to do is purchase one of these -

It say's 9.6 volt in the ad, but I was informed that this is the correct charger for a 3-cell LiFePO4 pack. I tested this unit with a charge on my pack and it successfully charged to 10.9v and then shut off. Success. I was a little concerned that the label on the back said Li-Ion, but I was again assured by the seller that the labeling hasn't been updated. Anyway, the voltages check out, so I'm happy. It charges at a 1a rate, so you're looking at 1.5 hour charge from a maximum discharge. The unit has an led that is green when fully charged or disconnected. And it shows a red led when charging.

All we're doing here is bypassing the internal charger.

The pics have descriptions. If you got past my disclaimer/warning then the pictures should show an easy modification. Feel free to post questions if something isn't clear.


Good luck and...Continue Reading
Sticky: Mini Telemaster
Posted by punkindrublik | Oct 26, 2008 @ 01:29 AM | 18,285 Views
Just finished up another. Hope to maiden this week...

CCDR Cool Double
Jeti Spin 22
4 x JR SM22 servos (2 x ail)
1 x E-flite S75 (on flaps)
Tenergy 3s 25C 850 lipos
Posted by punkindrublik | Oct 18, 2008 @ 03:39 AM | 17,403 Views
Finally getting to this little gem. It calls for a 40mm EDF, but I'm going DD.
Here it is so far...
Posted by punkindrublik | Jun 04, 2007 @ 06:02 AM | 22,653 Views
FINALLY found some time to get dusty and get this puppy finished. I still need to install the battery, tailwheel and aileron servos, but other than that, she's ready to go...

Cylcon Mini Elite (400 watts at 78g!! :eek
Jeti Spin 44
E-Power 2200mah 3s 20C lipo
HS65HB's on ailerons
HS81 on elevator
HS81MG on Rudder (set up for pull-pull)
Covered entirely in Microlite with GP Smoke trim tape
Cowl was painted with 21st Century paints

Haven't had a chance to weigh her yet. I'll get that done as soon as I get the rest of the guts in it.

Maiden coming shortly
Posted by punkindrublik | Oct 17, 2006 @ 07:08 AM | 26,723 Views
#1. Punkinwhat?
It's PUNK in drublik. An album by NOFX in the exremely early nineties. It's also a play on "drunk in public". Having been in the college bar biz for over 17 years and growing up on punk music, I could relate
It's not PUNKIN!! That's something you call your 4 year old daughter. It's Punk, or Brian

NO! I make carbon fiber landing gear for a living.
I just trade a lot. I do use my position in the hobby business to get dealer pricing on a few things, but I don't buy large enough quantity to get that with most companys. I'll always try to help you guys out on a deal whenever possible.

#3. DO YOU FLY??
YES, LIKE A MANIAC!! I've been addicted to this hobby for 16 years now
I've got everything from micro brushless to 35% Scale. Speed, EDF and 3D are my things

YES, again, I love to build. I have a good 75+ kits under my belt and consider myself to be an experienced builder.
Nothing beats balsa and fiberglass

Posted by punkindrublik | Oct 17, 2006 @ 07:00 AM | 43,220 Views

Please don't be intimidated by this. I only put this in because of a very few problem members I've dealt with in my 1000's of transactions here. If you're one of the good guys (as the majority of you are), you can probably just skip it. Thanks

#1. DELIVERY TIMES - I can only ship once or twice a week, so PLEASE DON'T FREAK OUT if you don't see your item in 7 days. If I receive payment right after a trip to the PO, you can most certainly add a few days to the delivery date. Sorry, I have a real business, and that comes first...

#2. SHIPPING METHODS - Unless stated in my posts, I ship small stuff via 1st class and larger stuff via Priority Mail or FedEx. If you have a problem with this, please make this clear in your offer. I will ship anyway you like but I will also pass on the costs to you.

#3. I RESERVE THE RIGHT TO SELL TO WHOM I CHOOSE. I will usually work on a first come first serve basis, but I reserve that right in special circumstances. I WILL ALWAYS HONOR MY WORD.

#4. I am always willing to entertain offers, but if you ASK A LOT OF QUESTIONS or HAGGLE, please don't expect to be the first considered just because you were the first to contact me. As soon as somebody says "I'LL TAKE IT", the item is sold. I certainly don't mind answering questions, but a quick sale is what I'm really looking for.
I absolutely hate haggling, but still feel free to make offers, ya never know. I rarely get my actual asking price, so it does pay off.

...Continue Reading
Sticky: Spacebox
Posted by punkindrublik | Jul 08, 2006 @ 08:36 PM | 28,668 Views
Okay, so I get a hard time for using a sailplane tray. I don't even own a sailplane

I gotta say, this is the most comfortable flying I've ever done. I retrained myself for 3 finger flying about a year and half ago and haven't regretted it a bit. So much more control and "feel" as to where my sticks are.

Now that I've found the spacebox, I'm getting spoiled. My Tx seems heavy now since I never have to hold it anymore!