HorizonHobby.com Shop our Airplanes Products Shop our Surface Products
Tim Green's blog View Details
Posted by Tim Green | Jan 03, 2016 @ 10:47 PM | 1,993 Views
No Snow Today - video recorded in log color, post processed auto level (9 min 20 sec)


Noodling about the yard in a drone - on a recent snowless winters day. Was flying a DJI Phantom 3 Advanced.

Vid was recorded with camera color set to log mode - which creates a shockingly dull video, but doesn't throw out any data while recording. Leaves it all there for post processing.

Post Processing ...

Edits were done with Corel Video Studio Pro v8. Settled on an auto level filter for putting the color back.

It's long - didn't cut it down at all, since I wanted to study the effects of the auto level filter as the views changed. Besides - I like the view from up there.

Added some music - and here we are.
Posted by Tim Green | Dec 24, 2015 @ 12:33 PM | 1,726 Views
Beer Bottle Flip 2 (1 min 25 sec)


Taken with a Phantom 3 Advanced - always fun.
Posted by Tim Green | Dec 24, 2015 @ 11:56 AM | 1,672 Views
A Drone About the Yard (0 min 59 sec)


Improved this video with a couple edits - better beginning and ending now.
Posted by Tim Green | Dec 01, 2015 @ 05:06 PM | 2,123 Views
Edit: it turns out that having the iPad Air 2 display in some proper shade is also key to enjoying the FPV experience. And I was in deep shade, while flying the P3A on this day. I plan to get a proper light shield. Trying things like black sheets, etc.

Ahhh - to dream of flight - and then to live that dream, with both feet still on the ground ...

Phantom 3 Advanced Live - saucy pilot has swig of beer (0 min 32 sec)


That was the dream realized, via the P3A's 720p live video stream. What I saw while I was flying.

Here's a sample of the promise, without the realization ...

DVRs from F550 w Hero3 Black+ on Mini3D gimbal (2 min 6 sec)
...Continue Reading
Posted by Tim Green | Sep 22, 2015 @ 03:21 PM | 2,216 Views
Taken with a P3A ...

A Drone about the Yard (1 min 5 sec)


Tried new video editing technique (new for me) - using a bunch of short segments (less than 10s each, most less than 5s), tied together via the music. Allows one to make an ordinary video somewhat exciting and fun.
Posted by Tim Green | Sep 14, 2015 @ 08:15 AM | 2,592 Views
Got a Phantom 3 Advanced, a couple weeks ago. So, I included a stock photo, since they're all the same. Didn't have to do a thing to it. Nada. Zip. Includes a simulator - so you can try before you fly. And it's cheap. Cheaper for the functionality, than my built up multi rotors. And, it provides better live video. And, it's got an OSD to die for. FPV. Maps. You name it - it's all available on the live display (your iPhone or tablet, mounted on the included transmitter). Everything's designed in. Including a few auto flight modes. I won't say more, as this is a well documented, and well known product. (and well designed, I might add, from the software, to the case)

The thing about it is, that, it's a game changer for multis.

You don't have to be handy, any more, to fly.

Everything changes, all the time.
Posted by Tim Green | May 28, 2015 @ 12:02 AM | 5,355 Views
A new gimbal, a dog, a pond and a barn (1 min 31 sec)

Flying my stock DJI F550 hexacopter, with a NAZA 2 FC, an H3B+ camera, recording at 1920 x 1280 x 60fps, supported by a brand new FY MiNi-3D 3 axis gimbal. Nice. And a very nice day to try it out on. Beautiful.

Inverting it is simple. Remove cam. Invert gimbal. Rotate roll 180 deg. Put cam back, right side up. Done. It adjusts to the new orientation on power up.

Bought mine here http://hobbywireless.com/gimbals-hea...al-p-1865.html

Added on June 22, 2015 ...

Just tried my working nicely 4 ball mini gimbal with the special Hero cable that connects the hero cam video with the internal mini harness, by plugging into the special plug on the hero mounting frame of the gimbal. BUT ... it's noisier, much, than using a direct plug of my own, bypassing the included mini wiring harness - a typical H3 cable that plugs into the H3 then directly plugs into my NAZA OSD wiring harness.

I'm not surprised. The direct connection has fewer conns and is a twisted pair, so should be less noisy.

Back to original post ...

Some pics of the gimbal mounting ...
Posted by Tim Green | May 17, 2015 @ 10:23 PM | 4,486 Views
Yesterdays Adventure (0 min 34 sec)


Was flying a Vector FC on a Naza F450 frame with an e300 pwr system. I fat fingered the controls, panicked just a tad, but recovered during the sudden unexpected downward fall. Didn't see the tree, until afterward, while viewing the recording. Lucky Man I am.
Posted by Tim Green | Dec 17, 2014 @ 03:46 PM | 4,575 Views
Vector vs Naza LoiterGPS Mode Comparison (15 min 28 sec)


Video showing back to back loiter/GPS modes by two different F450s. One F450 with a Vector FC, and one with a NAZA M FC. Each flight consists of a bunch of hovering using loiter/GPS mode. And each flight ends with an RTH test. The video starts with the NAZA flight, and finishes with the Vector flight.
The main video was taken with a Kodak digital cam mounted on a tripod.
I forgot to turn on the DVR until 2 min into the NAZA flight so the video starts without the DVR OSD stuff showing on the overlay in the left hand corner.
It was a windy day, as you will see from the trees in the background, should you view any bits of this long video.
Posted by Tim Green | Oct 24, 2014 @ 06:22 PM | 4,431 Views
A stock DJI F550, a FY-G3 3-axis gimbal, a Hero 3 Black+ at 1960x1280x60fps - some great autumn weather - some editing, my back yard, and a cat (Boris) a dog (Miles) and two humans - Corey and myself ...


https://vimeo.com/109965085
F550 at Dusk, Behind the Ridge, Around the Pond (2 min 9 sec)

Posted by Tim Green | Oct 14, 2014 @ 12:05 AM | 5,317 Views
Here's an example of what the FY-G3 3 axis gimbal does - at least on a stock NAZA M F550 ...

Video taken with H3W camera mounted in an FY-G3 3 axis gimbal - flown on a NAZA F550 (5 min 54 sec)
Video taken with H3W camera mounted in an FY-G3 3 axis gimbal - flown on a NAZA F550 (5 min 54 sec)

Posted by Tim Green | Oct 13, 2014 @ 09:47 PM | 5,384 Views
Edit on October 20 ... Really like the gimbal. Wonderful fun.

Just finished mounting an FY-G3Ultra 3-Axis gimbal on a stock DJI F550. $209 from http://hobbywireless.com/gimbals-hea...al-p-1321.html

Here's a link to the gimbal mfg ...
http://www.feiyu-tech.com/product-en.php?id=44

I used this thread as a resource (thx wattnoise) ...
http://www.rcgroups.com/forums/showthread.php?t=2216710

Video taken with this gear here ...
http://www.rcgroups.com/forums/showthread.php?t=2264860

I have not programmed the gimbal. I have never hooked it up to my laptop even, so I do not know which version of software is running on it.

It boots up ready to use, in heading follow mode - meaning I control the tilt. Roll, tilt and yaw are stabilized. And when I yaw, it follows. With a lag.

EDIT: There's sometimes a recurring yaw correction going on in the gimbal - of a few degrees. It's not always there.
Installed FW v1.12 on Oct 25, 2014, and it fixed this problem. FeiYu-Tech makes me happy.

I am running 4s. The gimbal works best at 12v. So I used an LC filter connected to the battery balance connector, and connected that to a 12v regulator, which feeds the gimbal.

The tilt conn from gimbal to Rx only has the signal,wire, as the heading cable has the gnd wire in it. Since I do not control heading in my system, I moved the gnd wire to the tilt cable. Else there would be issues.

All in all - I like this gimbal. Only been up twice so far - both times today.

...Continue Reading
Posted by Tim Green | Aug 13, 2014 @ 01:18 PM | 6,161 Views
And a shorter vimeo HD version.
Drone over South Ridge (2 min 15 sec)


A video demonstrating the video quality of the new home built camera tilter. Used a Hero 3 Black+ cam, running at 1920x1280x60fps.

Camera Tilter in Action 02 (4 min 57 sec)
...Continue Reading
Posted by Tim Green | Aug 12, 2014 @ 09:06 AM | 5,622 Views
Here's a benchtop demo of the camera tilter mounted on an F450.

Benchtop Demo of Custom Camera Tilter on f450 (0 min 24 sec)


It's a Vector FC. The servo is connected to the Rx ch 8. the Rx is powered by the Vector PSU's 5v tap. Note that I measured the current draw of the Hitek HS5245MG servo before hand - and that it maxed out well under 1 amp during use. Even when I stalled it. This is important, cause the PSU 5v supply can drop if the draw exceeds 1 amp.
I mounted the tilter away from the center. That's why the battery was moved back from before - to keep the COG in the physical center of the quad - better for the FC that way....Continue Reading
Posted by Tim Green | Aug 07, 2014 @ 11:05 AM | 5,907 Views
I always want to be able to look forward, and down, in the same flight. Cause, I have to land in clearings in the foliage, so looking down is desirable.

To that end, I put in two cams in an F550 - one pointing down (H3) and one looking forward (FPV cam) - and I can switch between them. This is good for mapping, and ok for flying. But, I am looking for a single camera solution, so ...

I designed and built this gear, to be glued to bottom of frame. It allows pointing the camera forward, or down, via a digital servo. The COG remains largely unchanged, when the camera moves. And, someday, I'll mount this on my Vector F450.

Camera will be mounted to plate via two vertical strips of Kyosho Zeal (not shown), to damp down vibrations.

All held together via CA glue.
Pics ......Continue Reading
Posted by Tim Green | Jun 24, 2014 @ 05:54 PM | 9,115 Views
Just completed adding an EagleTreeSystems.com Vector FC to a new stock DJI F450 frame - upgraded to the DJI e300 power system.

Here's my notes, along with enough pics, including 5 setup screens, to answer just about anyone's question. (maybe)

First Impression

Wow. What an advance in technology. And, it flies too.

For instance, handling the wind. Here's a low resolution DVR recording, Vector in Wind (3 min 35 sec) where I have my Vector hovering, while the cam is pointed at some trees in the wind - and their limbs are swaying - but as you can see the quad is quite stable. (note that the e300 power system contributes to the stability as well - lighter props, allowing faster corrections) ...

And, I can open up Vector menus on my OSD, by wiggling the mode stick a certain way - and I can navigate those menus using my sticks. In my basement. In the field, in between flights - and - in the air.

What more is there to say?

There's telemetry embedded in the video stream, which the ETS Eagle Eye Diversity Box can utilize.

And it's cheap - did I mention the cost of ownership - $237 from RMRC for the Vector - which includes GPS, OSD, logging, OSD stick menus - NAZA will run you $1000 for this setup - I know - I have two. And APM will run you about $800 for similar gear.

And it's easy to setup. How about failsafe. Using the FrSky TFR8SB SBUS, here's how to setup failsafe on the Vector

...

That's it - we're done. It's all ready to go. I love it.

...Continue Reading
Posted by Tim Green | Jun 02, 2014 @ 01:06 AM | 7,120 Views
Just finished my third full FPV flight - all three in the last 2 weeks. So, it's time to post pics of my F450 and ground station, with some info on the gear. And oh yeah - this rather low res video - a recording of the live video output - but at least it includes the OSD data.

1st flight went 80m. 2nd flight went 120m. This third flight, went as far as 244m. A slow, steady and cautious start to my FPV experience.

In the vid, there were times when video got flaky. I fixed it either by repositioning the crosshair or flying back into RF LOS. I captioned the video the two times video dropouts forced me to fly back into RF LOS, for those that would like to know what that looks like.

FPV 3 on F450 FS700 FPV cam 5 8ghz IRC 600mW vTx (3 min 26 sec)


I had some FPV gear in place last year - but didn't have the confidence to quit flying LOS completely. For several reasons - one - did not trust the multicopter gear - I had weird ccw yawing behavior in my hex and my quad - where after a cw yaw command, when over, it would yaw back a bit ccw by itself. and - two - no trust in my multicopter flying skills should something go wrong. Also, it seemed squirrelly, specially in the wind, not to get too technical.

Made the following changes this winter, for better flying and good FPV ...
  1. Raised the GPS by 1.3 inches - moving it further from EMI from battery and power cables. Apparently far enough that no more yawing occurs . Not in my quad or my hex (raised
...Continue Reading
Posted by Tim Green | Jan 07, 2014 @ 04:36 PM | 9,252 Views
HexB Hovers about the Pond (2 min 7 sec)


Finally got around to editing this video I took last summer. A 3DR Hexa-B, APM 2.91. A Hero3 White camera was doing the recording. The yard was mine. A long time ago, in the summer ...
Posted by Tim Green | Jan 05, 2014 @ 01:53 PM | 12,516 Views
This blog, lately posted, documents the recent addition of a Tarot 2D GoPro Hero3 Gimbal to my F550. It also covers the subsequent addition of DJI legs, after my homemade legs broke, allowing the gimbal to come in contact with the earth oh yeah.

Note that I liked my legs, before that happened - even though they sometimes broke , they were easy to glue back on.

But ... the DJI legs haven't broken once yet. And they don't get caught in the turf on takeoff, as much as my legs did. And they flex just enough, at least for me. And they have clearance, for the Tarot gimbal, as you can see in the pics below. So I remain happy with the DJI legs. They weigh somewhere around 45g total. I used 4 for my F550. I also put them on my F450.

After:

Here's the way it was before the addition of the new DJI legs and the Tarot 2D Gimbal:


And some attached pics - starting with the after pic, followed by a few Tarot 2D build pics (still showing the old legs) ......Continue Reading
Posted by Tim Green | Dec 29, 2013 @ 10:54 PM | 7,845 Views
Pics follow text.
  • Status: body is getting painted
  • Body: Custom built from 3/16 plywood and basswood.
  • Radio: Futaba 12FG with R617FS rcvr - tried using a TFR6 rcvr, but that would not run the digital steering servos.
  • Video: 800mW 1.3ghz vTx using circular polarized antenna to reduce mutipathing - has penetrated 4 houses. Also a 1.3 ghz low pass filter.
  • Video and FPV Camera: Hero3 White
  • Camera Gimbal: ST200 from Servo City, providing pan and tilt functions
  • Ground Station: 8" monitor with sun shield, 1.3ghz circular polarized antenna to reduce multi pathing.
Why a Summit? Cause it can do the job. Also, I like the low gear....Continue Reading