HobbyKing.com New Products Flash Sale
GeorgeG97322's blog
Posted by GeorgeG97322 | Sep 27, 2014 @ 10:52 PM | 1,308 Views
Good Day All...

I have been doing a bit of building as of late.

I have begun mounting the landing gear on the Auster. I will use pieces of a small brass hinge to create a bolt on mount similar to the real aircraft (maybe not quite scale sized) and will use the wire of the "cross struts as a way of creating "shock" movement. More on that later.

Attached are photo's of the wings for a Thulin Model "K" (42'') span. I had created the parts several years ago so I decided to glue them together. The ailerons have not be cut loose at this point, need to finalize how to control them (with a servo of course...) but what method of pushrod or cables. The rudder and stab have already been laminated and built (several years ago) so maybe I'll start the fuselage soon...

Never mind the date on the photo's I just took them, guess I need to reset the camera date


Posted by GeorgeG97322 | Sep 05, 2014 @ 10:19 PM | 1,345 Views
Good day everyone,

Back to work on some models...

On the Fokker, I have used some polyspan to re-inforce two angled lap joints. The joints were rather hastily build and really not that good. So on one side I have the new re-inforcement and on the outside I will use epoxy to fill the gap. Fortunately it's all sheet built in this area and will sand up nicely to pretty much hide the gap.

On the Auster, I'm still debating how to do the landing gear. Attached is a photo of how the original landing gear were made. It took a while of internet research to really understand how the original gear worked. I don't believe that there is sufficent strength in teh way the fuselage was designed to build scale type landing gear, so I will build something a bit more easy to put together.

Posted by GeorgeG97322 | Sep 02, 2014 @ 10:46 PM | 1,752 Views
Wow... Cat is finally out of the house...

So... I've been cleaning up and sorting out much of the clutter in the hobby room. I relocated the fuselage for the Fokker and the Auster.

I have begun pondering how I want to try to build the landing gear for the Auster and what the next step will be on the Fokker.

More soon (now that the Cat is gone...)

Posted by GeorgeG97322 | Aug 20, 2014 @ 12:58 PM | 1,398 Views
Let see now...

I have most everything ready for Contest, I'll be CD, and not flying. Besides, I haven't really taken any time to fix up / repair any of my free flight models.

I have gotten more done to the AutoCAD files for the WACO and the AVRO. However I have not got them completed. I have several older AutoCAD files I should continue with as well. There's a DC-5, Yakolev Air-4, 1913 Dyott monoplane.

I need to get back to work on the Fokker F.VIIa as well as a couple others.

But alas, I still have the hobby room all covered up. Hopefully one day SOON I'll be done taking care of that cat...

Posted by GeorgeG97322 | Jul 29, 2014 @ 02:07 PM | 1,760 Views
Lets start today off with the fact that I have not been able to send that cat home yet. So the hobby room is still covered up (for protection).

I have been able to spend more time working on the plans for the AVRO and WACO. I could actually begin prototype models of both at this point, however there are several models already in progress that I really need to finish.

Lots to do around the house, so not much beyond the CAD works has been done. Once I can send the cat back home, then I could leave things out on the building board. Meaning I could actually get some modeling done.

I will be a Co-CD at an upcoming contest third weekend of August, that should be a lot of fun. Hopefully there will be a big turn out again this year.

Posted by GeorgeG97322 | Jul 18, 2014 @ 12:07 PM | 2,100 Views
Good day all,

I have put in several hours of drafting time at the ole computer... Sharing some time between the WACO and the AVRO.

As for the Tornado, I have assembled the rudder (needs sanding now) and the pylon as well. I have cut new side sheeting (one piece verses the two part kit side).
I got some good advice from a good source that the Tornado has a tendency to be tail heavy (as many free flight models tend to do) so I will make the pylon slot and pylon adjustable and shift the pylon when closer to completion.

I could sure get a lot more done if I could give that darn cat back to his owners.

Posted by GeorgeG97322 | Jul 15, 2014 @ 10:18 AM | 2,365 Views
Well, ADHD setting in I have finished cutting out ribs for a 1/2A Tornado for next years one design free flight competition. The old Jasco kit used good but slightly heavy wood. There was also quite a range of rib sizes due to the die-cut tooling.

I have made more progress on both the Avro 641 Commodore and WACO XJW-1 drawings. I need to go to the Western Antique Aeroplane and Automobile Museum which is only a few hours drive from home. It would be a lot of fun let alone maybe get some good pictures of their WACO UBF.

I currently have several electric R/C scale planes in progress of some sort. they are:
Avro Anson - scaled up from Harold Towner plans
Thulin "K" - based on plans by Walt Mooney and drawings by Bjorn Karlstrom
Taylor Auster MkIII - Scaled up plans by Derek Buckmaster
Fokker F-VIIa - Based on miscellaneous drawings from the internet world

Posted by GeorgeG97322 | Jul 08, 2014 @ 05:30 PM | 2,246 Views
Currently I have most of my hobby room covered up to reduce damage caused by the "cat" that we are taking care of until my niece and her family can get settled in somewhere after their retirement from the Air Force. I sure hope it is soon...

I did a tid-bit of work on the Fokker recently (SBO-3), but it is a pain to get it out of it's hiding space and then have to put it right back in...

I have been trying to get back to some AutoCAD work that I have been doing, but alas not much success doing that either. I have done some to the Avro 641 Commodore and have been readying information on a WACO xjw-1 (UBF).

More as it comes along. I hope I'm not boring you all to death so to speak...


Posted by GeorgeG97322 | Jun 08, 2014 @ 02:26 PM | 2,042 Views
Not much done this week due to a somewhat busy work week, and all of the fun surrounding my daughters finals and graduation and party therefore...

Hopefully back to some modelling soon. Oh yeah, still got that cat to contend with too...

Posted by GeorgeG97322 | Jun 05, 2014 @ 05:10 PM | 2,584 Views
Hello again everyone...

Attached is new teaser of the Avro for you all to look at.

I have gotten a little further with the Fokker if you check out the other thread.

I am experiencing more of that dreaded cash flow/money crunch thing again and will be stalled again for a while. Some small tasks will continue but no major accomplishment will be expected. I have some supplies to continue the Fokker but will not have the radio or motor system for sometime.

Thanks again for keeping up with my ramblings...

Posted by GeorgeG97322 | May 31, 2014 @ 06:37 PM | 2,596 Views
Good day all...

I have gotten further on the Fokker, but you'll have to go find that thread in the "Electric Scale Kit/Scratch Built thread.

Attached below I have a teaser of the upcoming Avro 641 Commodore, which I have been able to put a little time to on the ole AutoCAD machine...

Been rather busy with the real job so that about it for now...

Posted by GeorgeG97322 | May 11, 2014 @ 01:26 PM | 2,764 Views
So here's the newer one... Derek Buckmaster Auster Mk III scaled to 1/9th.

Still working on the wing rib patterns cause I want flaps on this model. Span works out to 48''

Posted by GeorgeG97322 | May 09, 2014 @ 12:48 PM | 3,175 Views
Wow, over 1200 hits.

Thanks to all that at least open this blog.

As stated in my last blog, not using so many words, funding for my addiction of model airplanes is going to be low for the for seeable future. Thus I find that I have a enough balsa, and other materials to continue building in some regard. But purchase of motors, batteries, servos and the like will not be often if at all.

So to step forward, I have been building on a couple of projects that were started quite awhile ago. Therefore I will continue to blog and share with you all the little bit of modeling that I am still able to do.


Posted by GeorgeG97322 | Apr 09, 2014 @ 03:24 PM | 2,708 Views
To all that have followed along with my blog, due to the ever decreasing job market I will be out of commission for a while. I will continue to follow along, but my modeling is going to take a break for the next few days, months, years.

I hope to be back soon...

Posted by GeorgeG97322 | Mar 01, 2014 @ 05:58 PM | 2,576 Views
Wow, Been quite a while sense last post here in my blog. Busy at the real job, and trying to keep busy in general. I have been working on a number of projects.

Fokker F-VIIa (Build-Off)
I have built the basic fuselage box, stab and elevators ready for final fittings and sanding. Rudder and Fin currently on building board. I still need to finish the wing rib designs. More on my thread:

Not much free flight building this year due to having planes already. I have reconstructed the rudder for the East Wind (1/2A Nostalgia) to hopefully reduce the dutch-roll problem (front rudder). Seems to be more pronounced once I dialed in the Medalion to a good needle setting. Makes me think that the slower high torque diesil that it was designed for did not have this problem.

Other stuff still creeping along. New cad plan under way for an Avro model 641 Commodore. 1/10th scale with wingspan at 45''

There ya have it for now.

Posted by GeorgeG97322 | Jan 05, 2014 @ 08:57 PM | 2,851 Views
I have decided to enter the "scale build-off 3" that is currently under way on the Scale Electrical Planes Group. I have been researching the Fokker F-VII for a while and thought it would make a good entry. I will design, draw and build one of the single engine versions (forerunner to the famed tri-motor Fokkers).


I also have a new peice of furnature in the hobby room. It was an ozalid blue-print machine stand in it's day and was collecting dust until I got my hands on it.

Posted by GeorgeG97322 | Dec 19, 2013 @ 01:19 PM | 3,103 Views
Had to take some time away from modelling as of late.

Project #1 was to construct a fabrication table for the wife's new sewing business. (picture 1) it is 4'x8'x3/4" plywood and has a 2x4 frame with 4x4 pedestals with 4" casters. I have yet to finish the lower shelf using 1/2" ply.

Project #2 was to repair the pedestal to our 80+ year old dinning room table.
(picture 2).

As you all can see, much of the hobby room has been cluttered up.

Posted by GeorgeG97322 | Dec 03, 2013 @ 09:37 PM | 3,261 Views
Towner Anson Project
I have both tube frame part fitted in, and need to work on some of the interior fittings. I have begun checking some of the lower formers for their fit, I think I may need to redo a couple of them due to them being too small for the postion they go into.

1/9th Auster
One side of fuslage framing completed, and about half of the other side is done.
I have worked up a more scale wing rib pattern that will allow for ailerons and flaps. I will need to double check it for the area of the slots too.

I have been involved in a very interesting ramble on a newer thread about scale drawings and scale models. Voiced my opinion as it were. you can check it out here: http://www.rcgroups.com/forums/showthread.php?t=2046707

It is enjoyable to bat the ball back and forth with those willing to listen and share.

Another fun thread has been this one: Flying, is it the necessary "Evil"?

And this one too... Anyone producing new scale drawings anymore?

Good day to all

Posted by GeorgeG97322 | Nov 24, 2013 @ 08:29 PM | 3,114 Views
Towner Anson Project
I have the lower fuselage former cut and ready for sizing and attachment to the upper portion of fuselage. I have one side of the tube frame completed and have begun the assembly of the other side.

1/9th Auster
I have completed the framing of the rudder/fin and the stabilizer/elevator. I have been working on a more accurate wing rib template. I was hoping to more closely create the flap and aileron contruction. Flap seems to be the tough part. The original on the Mark III was a split flap. This makes for a rather thin trailing edge and I have found it difficult to come up with a rib design that I like for the flap area. Of course the original wing trailing edge was nothing more that a very narrow piece of metal attached to the end of each rib.
More on this as it comes together.

Posted by GeorgeG97322 | Nov 12, 2013 @ 01:59 PM | 3,000 Views
Limited Penny Plane
I have two new prop blades ready to form around the big glass jar. Still need to taper a prop hub and such for the new prop.

Towner Anson Project
I have been readying the bottom formers of the fuselage. I figured as sturdy as the top half is, why not begin the bottom framing as well. Getting closer to gluing up the dowels to form the "tube" portion of the fuselage structure. Once the dowels are glued up, I'll need to find and do the interior paint. Then I'll need to find a dummy to sit in the pilot seat after it is created and installed.

1/9th Auster
I now have all of the tips and curved portions of the wing, stab and rudder formed and ready. After a little research, I verified that the basic stab and rudder where flat and not airfoiled in any form. Not too surprised at this, and it will make them easy to build. I have discovered in this research that the rudder fillet begins at the fuselage sides (as normal I suppose) however the stabilizer is mounted at the top of the fuselage. So how does one form the fillet if the stabilizer is covering the top of the fuselage. The secret I have discovered at least on the real Austers is that the fuselage and rudder apear to be covered prior to the mounting of the stabilizer. This presents an interesting construction aspect to the build. How do I accomplish the same basic method on such a small model???