New Products Flash Sale
Tahoe Ed's blog View Details
Posted by Tahoe Ed | Oct 25, 2015 @ 11:03 PM | 1,208 Views
DJI has just made public their Official DJI Owner's Page on Facebook.

They also have a Support Page to assist with issues with DJI products and FAQ's.
Posted by Tahoe Ed | Sep 20, 2015 @ 10:22 PM | 1,996 Views
we have launched DJI support on FaceBook. Please feel free to visit us there.
Posted by Tahoe Ed | Aug 16, 2015 @ 11:03 PM | 3,109 Views
Issues on updating the remote controller and corresponding solutions

GL 300A:
Please try to update GL300A remote controllers by using a USB drive/ SD card adapter or connecting the aircraft gimble port with the controller via a USB cable. If you fail updating with these two methods, please connect your controller with your app (meanwhile keep the aircraft off and keep your mobile device connected with the Internet), then turn on your app, go to camera-aircraft status, download and install the firmware and the remote controller will be updated (More than 15 remote controllers in China have been updated in this way).

Remote controllers whose model type is GL300B can only be updated on your app, however, according to the survey, the updates failed in the following three conditions:

First, The remote controller turns off automatically, then the first led light on it turns cyan. And when you connect your remote controller with your mobile device again, the app says no signal, and thereís no notification that says the remote controller needs to be updated.
Solution: Itís possibly because the 1765 module on the remote controller fails updating. So please press these four buttons on the remote controller at the same time, namely, C1, C2, Recording and the Scroll that adjusts ISO, meanwhile, spare another finger to turn the remote controller on (donít let the other four fingers go), then turn on the app and youíll be able to download the firmware again and please...Continue Reading
Posted by Tahoe Ed | Jul 08, 2015 @ 12:23 PM | 4,722 Views
Dear DJI Phantom 3 users,

DJI Phantom 3 Beta Testing Program is launched now.
We'd like to invite 200 beta testers all around the world. If you are interested in this program, please read the attachment for the instruction of participating Phantom 3 Beta Testing Program.

1. If a user reports a firmware bug that has not been found or announced to the public prior to the beta test, they will receive a reward that is commensurate with the significance of the bug discovered.
a) The first three users to report and provide complete documentation on a bug that DJI determines may cause fatal flight issues, will each be awarded 300 DJI Credits. Users must submit complete flight data and flight records from the app to be eligible.
b) The first three users to report and provide complete documentation on a bug that DJI determines may cause non-fatal flight issues, will each be awarded 200 DJI Credits. Users must submit complete flight data and flight records from the app to be eligible.
c) The first users to report and provide complete documentation on a bug that DJI determines is unlikely to affect flight, will each be awarded 100 DJI Credits.
2. At the end of test period, users will be awarded 10 DJI Credits for each report they send with at least ten (10) minutes of flight logged and for which sufficient flight data has been submitted. The cap on this offer is set at 500 DJI Credit per person.

Remarks: DJI will release awards within two...Continue Reading
Posted by Tahoe Ed | Jul 05, 2015 @ 07:00 PM | 2,632 Views
Posted by Tahoe Ed | Jul 03, 2015 @ 10:52 PM | 3,239 Views
This is a very nice write up if you are having issues with setting up you A2 and Lightbridge.
Posted by Tahoe Ed | Mar 19, 2015 @ 02:16 PM | 6,642 Views
I just received my Tradecraft Case for my Inspire. As with the Tradecraft case that I have for my Phantom 2's this is of the utmost quality. On the case it is noted to be water proof and it has a vent for traveling in an aircraft. I wish my P2 case had this feature. Opening it after a plane flight can be difficult. On the inside is room for the Inspire in ready to fly condition, you do not need to enter transport mode. There is plenty of room for two tx's, props, the gimbal case, lipos and misc. items under the 4 lipo box. Note that this is not for carry on, the case is too big but for checked luggage it should easily stand up to the handling of the ground crew. You will have to carry your lipos in your carry on however. The case is not a light weight, at about 25 pounds, but it has rollers and a extendable handle. The only issue that I have had with the Tradecraft cases is that the handle is difficult to extend with one hand. It takes two. Not a major issue just an irritant when you have your hands full with other stuff.
Posted by Tahoe Ed | Aug 10, 2014 @ 11:20 PM | 9,169 Views
I had to reset the landing gear. If you look around and follow the wires coming from each leg, you will see they plug into a R & L and there is an IN on a small block. Next to the IN is two little holes. The one closer to the L & R has a little button inside the hole. the next one to the right of that hole is a light. It's likely that it isn't showing any colour.

This fix will take two people.
1. Make sure the gear switch is in the DOWN position
2. With the power off. use a small screwdriver or paper clip and push in the button.
3. Set up the drone so that that the landing gear aren't touching the ground. I rested two of the arms on a desk and supported the drone via one of the other arms. THEN...
4. Push the button and hold it there while the other person plugs in the batteries.

It should go through a reset and then you will see the little light come on. You should be back in business! Try the landing gear lever and with any luck you'll be back in business.
Posted by Tahoe Ed | Jul 15, 2014 @ 11:56 AM | 9,047 Views
Posted by Tahoe Ed | Jun 20, 2014 @ 01:11 AM | 8,885 Views
Thanks to user Aitrui for putting this together. He did quite a bit of research to do it. Maybe it will help others.
Posted by Tahoe Ed | May 23, 2014 @ 06:58 PM | 12,241 Views
Here is the procedure to reset the gimbal when it bricks on upgrade.
Posted by Tahoe Ed | Apr 24, 2014 @ 08:43 PM | 11,106 Views
A user came up with a procedure for resetting the BTU on the Ground Station. Here is the link;
Posted by Tahoe Ed | Apr 10, 2014 @ 12:48 AM | 10,377 Views
This appears to be a solution for those who are frustrated with Ground Station's lack of Photogrammetry.
Posted by Tahoe Ed | Mar 24, 2014 @ 11:44 AM | 11,717 Views
This is a very through review that was done on MRF. It compares the TMotor Props, the DJI original folding props, and the new 1552 folding props.
Posted by Tahoe Ed | Mar 12, 2014 @ 04:33 PM | 11,280 Views
After many questions on how to determine COG I have added this to my blog to make it easily accessible.

Setting up the Wookong M center of gravity (3 min 11 sec)