New Products Flash Sale
Bart83's blog View Details
Posted by Bart83 | Oct 25, 2015 @ 01:19 PM | 1,856 Views
Current project :

Dornier Do24K1 , 1/10th scale

Status : the build has started . . . .



Enjoy !

Bart
Posted by Bart83 | Oct 21, 2015 @ 10:02 AM | 2,312 Views




Dornier Wal :



Easy to build scale balsa flyingboat. The templates plan is attached as pdf file. The builder will have to get it printed at a local or online printshop. The idea is that the builder uses this thread as a build guide.

Link to all photo's : Gallery

The model is build using mostly 1.5mm en 3mm Balsa (1/16'' and 1/8''). The build should be a nice mix between a plan and a scracht build with some things needed to be decided by the builder him or her self. These are things like the cowlings , cockpit , and location of the servo's e.d. Offcourse you can use this prototype thread as a guide.

Setup : 2x Park 450 890kv spinning 9x7 three blade props. 2x18A esc and a 3s3300mAh Lipo. Ailerons 13g micro servo metal gear , Rudder and elevator Micro servo 22g.




PFD file's download links





Flight video's :



Dornier Wal , maiden flight (9 min 39 sec)


Dornier Wal (4 min 56 sec)
...Continue Reading
Posted by Bart83 | Dec 12, 2014 @ 11:44 AM | 3,878 Views
This time i wanted to do an amphian. I thought a Goose might be a good subject so i started to make the 3d model for it , when this was done i surprised Gary with it and his response was very nice. He imediatly got excited so the next project subject was decided.
I got inspired by the psm Albatross building method and i was looking to do a simulair construction method. . . . . it should be fun to build it without plans.

In Oktober 2014 the model had its succelsfull maiden and i finally could show it here on Rcg , i had been silent about it till that day

Here is a link to the thread :

79'' Grumman Goose , lasercut plan-free build amphibious airplane


Added some pictures and a video below . . .

Grumman Goose 3rd Flight (7 min 48 sec)


Gear animation (0 min 42 sec)
...Continue Reading
Posted by Bart83 | Dec 07, 2014 @ 05:33 AM | 3,330 Views
After my empire flyingboat i started a new design. This time the Dornier Do24K was the subject. I did an extensive research and made a very true to scale 3d model. Rcg member Parkcityskier has build the 1st prototype. Sadly the model came out a bit to heavy. Currently i am working on a re-design wich both Jim and i shall build.

Here is a link to the original design thread :

Dornier Do24K - Construction idea's


Link to Jim's build thread :

Scale Build-Off 3 - 103 inch Dornier 24k Lasercut kit Prototype No.1

Cheers,

...Continue Reading
Posted by Bart83 | Dec 07, 2014 @ 04:00 AM | 3,459 Views
This is my first desing , i based on Ivan Pettigrew's solent. During the desing phase i met GLM ( Gary ) from Morganmill/RC here on Rcg. Thanks to this now a wonderfull shortkit of my desing is available for purchase.


Link to the design and build thread :

Short S.23 'C-Class' , Shadows of Ivan

Morganmill.com/RC

Empire flyingboat , low and slow (10 min 51 sec)


Cheers,

...Continue Reading