HobbyKing.com New Products Flash Sale
Mister Gassy's blog
Posted by Mister Gassy | Jun 28, 2013 @ 06:02 PM | 1,734 Views
Ok so I started this build and the Arducopter is Rock steady!
-4x RCtimer 30A SimonK
-4x sunny sky 2122 980kv
-Led strips with strobe controller (blue in front, red in back)
-FrySky RX (cant wait for my Taranis)
-Range Video vibration isolation mount
-APM, ublox GPS, OSD, Telemetry
-Boscam 500mw 5.8 ghz vtx
-sony 1/3 camera
-GoPro 3 Silver edition (all accessories)
-9x w/ smartie parts board and 6 position switch
-Boscam AIO goggles
-Boscam Rc805 VRX
-Philips 9" slave screen
-2 sets of immersion 5.8 antennas (sma and rp-sma)
Posted by Mister Gassy | Jun 25, 2013 @ 12:52 AM | 1,901 Views
Ok so the first thing i wanted to setup was my OSD to feed Mavlink data to my GS/goggles...so I had to use an extra UART port on my APM... but the results are AWESOME


5.8 ghz relay connected to xbox and OSD

hopefully ill post more as the build progresses
Posted by Mister Gassy | Jan 31, 2013 @ 03:00 PM | 2,131 Views
You don't have to be in Cali to get some solid planes...all these i traded or purchased from the classifieds.

Left to Right
~Phase 3 F-16
~Multiplex Funcub (Morgan Mill floor stiffener)
~Parkzone T-28
~Parkzone F4u Corsair & extra Fuselage (not sure why this made it into the pic)
~Parkzone Extra 300
~Durafly T-28
~E-flite T-34
~Hangar 9 P-51 Mustang

What an amazing community, Thank you so much!!!!! Cheers and light up the skies!
Posted by Mister Gassy | Dec 11, 2012 @ 07:05 AM | 2,150 Views
Some of my Planes Thanks to all the RCGrouper's who made acquiring some of these beauties so painless