HobbyKing.com New Products Flash Sale
Hobby WOW's blog
Posted by Hobby WOW | Aug 27, 2014 @ 02:05 AM | 978 Views
Walkera New QR X400 with DEVO 8S 6-Achsen-Gyro UFO Quadcopter RTF with Aluminum Case 2.4Ghz
Walkera New QR X400 is upgrade version of Walkera New MX400S.Would be more luxurious and beautiful,
The canopy and tripod has changed a lot, but still own 3D rolling function, if you feel MX400S appearance is not the eye-catching enough,We believe New QR X400 will be your best choice!

QR X400 Features:

•Adopting 4 brushless motors, the flight is more stable, and it can make sorts of flight maneuver and also can make 3D rolls and flips.
•The simple and compact modularized design features easy installation and maintenance
•Adopting 6-Axis gyro control system ,which ensures precise flight performance.
•You can install the camera set for Aerial photograghy. (Camera set needs to be purchased separately).
•You can install the Telemetry module ,GPS and RPM to monitor the real time battery voltage, temperature, motor speed rate and aircraft location and height.
•Extra-large capacity battery delivers an extra-long flight time! Walkera recommends using a11.1V 2200mAh LiPo 25C LiPo battery for a perfect flight.




...Continue Reading
Posted by Hobby WOW | Aug 22, 2014 @ 05:15 AM | 1,235 Views
Thank you for buying FLYPRO X600 from HobbyWOW.The video is the assembly steps of X600.Hoping to help your installation.-

FLYPRO X600 assembly tutorial! (16 min 26 sec)






...Continue Reading
Posted by Hobby WOW | Aug 19, 2014 @ 05:41 AM | 1,330 Views
Name: Syma x5c.jpg
Views: 9
Size: 99.8 KB
Description:




2.4G For your better control
...Continue Reading
Posted by Hobby WOW | Feb 26, 2014 @ 01:18 AM | 2,577 Views
Is good to know how to take control in the air when Phantom returns home,
if it happens on the road to meet any obstacle or wants to land in the wrong place. Hope that helps.
DJI Phantom -Important ! How to take control in air after Fail-Safe !!! (3 min 37 sec)






...Continue Reading
Posted by Hobby WOW | Feb 17, 2014 @ 02:56 AM | 2,780 Views
Hubsan X4 H107D How to Flip the Smallest FPV Quadcopter and Q&A (4 min 9 sec)


The smallest First Person View (FPV) ready-to-fly quadcopter made by Hubsan, the X4 H107D, a contender to the popular Ladybird. It is quite amazing how Hubsan is able to pack everything, including a camera and video transmitter into a quad, smaller than a Ladybird, with 6-axis gyro flight controller. The package even comes with a radio transmitter, video receiver and a blight large LCD screen, ready for beginners to start flying first person view and filming.





...Continue Reading
Posted by Hobby WOW | Feb 11, 2014 @ 01:42 AM | 2,594 Views
Name: Yunyi Flight-Seraphi VS DJI-Phantom.jpg
Views: 11
Size: 118.0 KB
Description:

Seraphi-H Phantom Integrated Aerial Filming GPS Quadcopter RTF 2.4GHz with HD Camera





...Continue Reading
Posted by Hobby WOW | Feb 09, 2014 @ 04:08 AM | 2,860 Views
how to operate seraphi gps P,H,F (2 min 46 sec)


Seraphi-H Phantom Integrated Aerial Filming GPS Quadcopter RTF 2.4GHz with HD Camera







...Continue Reading
Posted by Hobby WOW | Jan 28, 2014 @ 03:49 AM | 3,509 Views
2-Axis Brushless Camera Gimbal Plug and Play for DJI Phantom & Walkera QR X350 FPV (5 min 45 sec)



There are probably over 20 selections of gimbals out in the market, notably the expensive Dji Zenmus and Tarot gimbals. We wanted a gimbal that has a motion processing unit to stabilize our camera while in flight and ready to use out of the box. We heard good things about this unbranded gimbal, so we decide to put it to a test. We selected the FPV 2-Axis Brushless Camera Gimbal from Hobbywow.com. This selection is based on the budget price, it's stand-alone ready to use controller that can be installed on any aircraft with any light weight pocket camera or GoPro, and the GUI software SimpleBGC.

Specification:
• Light weight CNC aluminum alloy structure
• Brushless motor direct drive
• With anti-vibration rubber balls
• With 2 x 2208 motors and gimbal controller sensor installed
• With motor protector which can help heat dissipation
• Weight is about 212G, total weight with GOPRO3 is about 285G.


Features:
1) Quick assembly
2) 2-Axis roll & pitch
3) Anti-vibration
4) SimpleBGC GUI
5) Compact






...Continue Reading
Posted by Hobby WOW | Jan 19, 2014 @ 08:23 PM | 2,306 Views
1.If flying time is less 9 mins,then can use the newest software V.123(only for walkera battery).

2.QR X350 control program upgrade tool including UP02 cable and UP02 Adapter.




3.Connect the blue single wire to signal wire of update access of flyer(blue to white),and connect yellow single wire to power wire of update access of flyer(yellow to red).Connect black single wire to ground of update access of flyer


Posted by Hobby WOW | Jan 10, 2014 @ 11:15 PM | 2,860 Views
You may meet some problem when using the H107D, such as black screen, splash screen, lines on the screen and jammed screen.

How to deal with these problems.-Do some simple check


A:black screen

1.We have to check whether there is something wrong with the cables

Bind the quad

Adjust the TX 5.8GHz receiving frequency to 5865

If there are images on the screen, it means there is something wrong with cables

If there is no image on the screen, we have to do some further checking

We take out the back cover of the quad

2. First of all, we have to check the plugs and cables on the PCB board, whether there are loose connection or tack weld

Then we take apart the camera module to have a look

3.After we take apart the camera module, we have to check whether the module is installed in the right place

If not, when we put back the battery box, it may press on some components of the module, leading to black screen

Let’s check whether there is loose connection of the module. If it looks like this, then there is loose connection

We just need to press the module and the module gets stuck

Now check the cables and plugs on the module, whether there are tack welds or loose connection

Then check the 5.8 GHz antenna to see whether there are tack welds or loose connection


B: Flake screen

1.First we have to check whether there is black spot or other things on the camera,Use a cloth to clean it

2.Then check the 5.8 GHz antenna to...Continue Reading
Posted by Hobby WOW | Dec 12, 2013 @ 04:04 AM | 2,978 Views
1.Flying in the open area with less people.Don't fly in parks where many people are.You may seriously injure somebody.

2.Never catch the plane when flying.

3.Choose a sunny day to fly,never fly on a windy day, or you may fall into trouble with facing the plane into the wind.

4.Keep everything may be wounded away from the propeller,such as loose limbs, clothing and hair and so on.

5.Don't try a warbird for it is difficult to control for a beginner.

6.Learn many knowledge from the manual book or forum or other experienced hobbyists before you want to fly.

7.If you have some question,please try to find the answer asap to avoid impossible wounded.

8.Two RC hobbyists can’t use the same channels at the same time on the flying field,for the planes would be controlled by both transmitters and may crash.If there are other model hobbyists flying,check the channel of their remote controls!

9.An experienced friend or assistant can help you in dangerous situations.

10.Keep everything is ok before fly. Check the rc plane,your transmitter,your battery and so on.Take the necessary equipment to maintainthe aircraft with you just in case.

Wish everyone enjoy the RC hobby very well.
Posted by Hobby WOW | Dec 11, 2013 @ 06:16 AM | 3,531 Views
Some friends do not come into contact with the remote control airplane always think the rc as toys, rc aircraft is not the simple toys, it need time to study and research!
Find a responsible seller, saving little money are often the beginning of saving big money!

Treat it rigorous to lay the foundation, otherwise the crashes hurt confidence and also hurt the wallet, the even worst if wounding. In fact, it is not only dangerous sport,but also a technology and basic kind of activity need machinery knowledage and other common sense, therefore cannot imagined as simple as playing with toys!

Starting with NEW V120D02S six-channel 3D helicopter.That allows you to experience the professional-level 3D model aircraft handling feel, with the excellent features small aircraft and large aircraft. Power, remote configuration and other showed good, can achieve a variety of 3D flight.