HobbyKing.com New Products Flash Sale
Allinone's blog
Posted by Allinone | Jun 03, 2014 @ 08:17 PM | 1,951 Views
I got this couple of months ago and I have almost finished it!!
It was new from 2003.
It has a .95 OS AX, Hitec Hi-Torque servos, AR6210 receiver, and a HUGE fuel tank.
Funtana-S .90 Finishing Up (2 min 14 sec)

Posted by Allinone | Mar 27, 2014 @ 07:32 AM | 2,240 Views
I had a good day going to my field yesterday. I took the Fish ,Dazzler, and Novus CP. I returned with one of my buddies planes he left, and a plane that was left and gutted for electronics. It looked like a Ultimate Biplane that had its wing taken off and was lying next to it. It looked like it could handle a .60 size engine! Since my Uncle was with us he wanted to take it and work on it. I would have done the same. There are 2 videos one got cutoff at the bottom of the page.
Flying ARCA 3/26/14 Great Planes Dazzler (13 min 25 sec)


...Continue Reading
Posted by Allinone | Jan 04, 2014 @ 11:00 AM | 2,223 Views
Happy New Year to everyone! I have been working on one of my friends boats. He burned up the esc, and knowing the servos in the boat are junk I replaced it with a Hextronik 9g. The esc is 30A and off branded from SeaKing but was purchased through HK. I have not test ran the boat but will soon! The Tantrum has nearly been finished. I need to sand the cowl and a few stringer ends, along with cutting the canopy plastic. I flew the Fish on Thursday, the plane has had many flights and belly landings. This caused a weakening nose structure. I added two popsicle sticks, then flew a little more. It then came loose again, therefore I added about ten more. No tests done on that since. I received my extra chargers and batteries for my Nano QX. I do not have pictures of that. I use an IPhone wall - usb adapter that connects to a usb expander, then to three chargers to charge my five batteries.
Posted by Allinone | Dec 21, 2013 @ 05:03 PM | 3,353 Views
Today I began building my first kit given to me by a close friend. It is great fun! It is a laser cut kit from mid 2003. I love building it and have finished the wings, ailerons, elevator, and rudder.
Posted by Allinone | Dec 20, 2013 @ 05:45 PM | 2,695 Views
One of my close friends gave me a Blade NQX for Christmas. It is a great quad! It is the most stable, and fastest quad I have ever flown.


Here is a short video.


Blade Nano QX (2 min 8 sec)

Posted by Allinone | Dec 15, 2013 @ 10:32 AM | 2,919 Views
I made this rover yesterday, I got bored so it should be some fun.



http://www.youtube.com/watch?v=r9X5jiMBOu8

I fixed the link. Sorry
Posted by Allinone | Dec 10, 2013 @ 06:23 PM | 4,026 Views
I found this new transmitter case that one of our fellow rcg'ers stumbled upon it is a gun case, and decided to use it as a tx case. I like it, the middle slab of foam has small squares that are cut-able but will stay if needed. I like it and do recommend it. Can share link to it if requested.
Posted by Allinone | Nov 30, 2013 @ 04:51 PM | 2,492 Views
Today I flew the maiden of Dazzler at last. Well my buddy took it up trimmed it and brought it back down. I then refueled it and made two further flights after that. My fleet for the day was the Dazzler, and the Fish (foamie). It was a good day at the field and I hope to fly it some more! My blog has the rest of the story on this plane.
Posted by Allinone | Nov 16, 2013 @ 09:32 PM | 4,829 Views
I decided to run my Dazzler on my own today (with a little help from dad). It was a little humid outside, but it was still ok. A few cranks over and it started right up, at a nice idle. Letting it warm up a bit I then taxied it around my driveway for about 10 minutes. Clearing it out by holding the plane and giving it some gas. Check out my blog page for the restoration.
Posted by Allinone | Oct 26, 2013 @ 01:04 PM | 2,802 Views
Cranking up a new project, that will be a 3D foamie, and will be schemed from Alabama's college football team.
Posted by Allinone | Sep 22, 2013 @ 07:01 PM | 2,919 Views
I was given a Dazzler .40 from a very generous man. He got it from a guy that had a house fire and was getting rid of most of his stuff. "I was later in the day to pick up the plane." When he arrived there were few planes left. "This was definitely one of the better ones." It came with some misc. parts, a starter, scraps of balsa, fuel tanks, and a hand pump. The plane came with an engine on it (.40) and one in the boxes (.46). I got home and began cleaning it. That took three nights easy to clean it! It did look good with a little help from dad and the some tooth brushes. I used Dawn Power cleaner on the motors and they cleaned up well. The plane sits as you see the pictures. I will be going to see that unnamed man soon to run the motors and tighten up the covering.
some of you may know want to know that I am 14. I mostly fly electric foamies that are 3D.

Update to project 10/26/13: I have finished putting gear on I accomplished this with nylon nuts and bolts. If I nose it in they will break and I will be in good shape. The motors from the fire turned out to be useless. I went to see my friend a few days ago and gave me a Magnum XL .40 that he had. "If I had known that it was there I wouldn't have it right now so it is yours!" I was completely ecstatic. He told me to mount it and we would go tune it on his back porch. At this moment it sits in my basement ready to fly. I added a rx and battery installed the previous fuel tank, ran tubing, and recovered the nose due to tearing. I couldn't have done it with out him! Notice: Color is diffrent due to a better camera. The orangeish color is more accurate.
Posted by Allinone | Jul 29, 2013 @ 12:37 PM | 3,386 Views
I have started making a apple app called RadioControlledWorld. The app tells all about R/C's.
Posted by Allinone | Jul 07, 2013 @ 10:03 AM | 2,967 Views
I will be posting my recent activity in here very soon.