New Products Flash Sale
benjamin presten's blog View Details
Posted by benjamin presten | Sep 30, 2015 @ 11:00 PM | 1,247 Views
Sorry all of this writing is copied and pasted together from things I have posted together.

I will update this page every time I made an advancement in the project

Update 10/7/15

I installed retracts on the latest version. The two main wheels are on the center line of the fuselage and retract towards the center. There is two removable wheel stands on the tips. The performance of the airplane does not seem to be hindered at all. The airplane will take off and land fine with flaps or no flaps and tip wheels or no tip wheels. And the gear retracts perfectly.

Both of these airplanes are made of DTFB, both are my design. The Micro one is just for Sh*ts and giggles but the big one actually has a purpose in life. (hopefully) It has a 60" wingspan and is the eighth prototype of the development. The 7th prototype is actually still alive and well 2100 miles from where I live with a friend of mine in Wisconsin. This one is not as fast as I would like but the one in Wisconsin I would say probably hits at least 80. It is capable of vertical take off from the rudders and for landing I usually just catch it because with the flaps down it will slow to walking speed. It is the best airplane I have ever built and in the top three of the airplanes I have flown.

As for the little one it flies okay at high speeds but as usual with airplanes scaled down to that size, it doesn't like to slow down much.

Also included is all the pictures I can find of the previous Prototypes. The one in...Continue Reading
Posted by benjamin presten | Sep 21, 2015 @ 06:24 PM | 1,458 Views
Here is the Super STOL airplane that I designed and built out of DTFB. It is made out of DTFB and has a sixty inch wingspan. It is a lot of fun to fly.

Flying it like I STOL it. (1 min 48 sec)

STOL Bloopers (1 min 38 sec)
...Continue Reading
Posted by benjamin presten | Sep 09, 2015 @ 10:40 PM | 1,522 Views
yup mostly using this as a method to get the picture on the internet so I don't lose the picture.
Posted by benjamin presten | May 23, 2015 @ 10:56 PM | 1,705 Views
I was given this Pitts by a friend who built it 25 years ago. It was powered with a 15 size glow engine. It was only flown once because of how under powered it was. It was built off of Marutaka plans (and it took me a lot of research to figure that out) and possibly a kit, I don't really know but there isn't any stamping on the parts that suggests it was a kit.
When I got it it was very heavy and with a wingspan of only 31 inches so it had extremely high wing loading. I made an effort to make the airplane as light and powerful as possible but on a budget. I stripped the airplane of all of it's electronics and replaced them all. The servos are parkzone metal gears with the exception of the aileron servo which is an old standard size servo I had laying around. The reason that I used a full sized servo for the ailerons is because the hole was cut out that big and I didn't want to do a bunch of wood work to make it smaller. I powered it with a Detrum 3720 650Kv brushless outrunner with a 13X6 prop. The ESC was a Detrum 50A and the battery was a 1300mAh 3S.
The airplane flew fairly well with this setup but it was still a little less power than I wanted. However the wing loading had gotten low enough that it didn't have to make a smoking hot landing. So I replaced the motor with a Turnigy 3542/4 1450Kv outrunner using the same 13X6 prop 1300mAh 3s and a Castle 60A ESC. Just recently I bought some 1000mAh 4S batteries that are roughly the same size and weight as the...Continue Reading
Posted by benjamin presten | Jan 08, 2015 @ 11:17 PM | 3,037 Views
I built this Gee Bee Model D last night. I have just a little more work to do to the bottom of the nose but otherwise it is done. It has a wingspan of just over thirty inches and it is about 30 inches long. It has a Turnigy XP 3530/14 motor, 10X6 prop, with a Turnigy 30A ESC and a 1000mah 4S battery. I was going to test fly it tonight but it is going to have to wait for a couple of months because it turns out that my transmitter is broken and as I am in high school and I don't have a job I can't afford a new transmitter.
Posted by benjamin presten | Dec 24, 2014 @ 11:26 PM | 3,136 Views
release the kraken
Posted by benjamin presten | Nov 06, 2014 @ 09:51 PM | 3,633 Views
I spent two nights building this airplane it is the version three of my sixty inch twin boom. I have also done three thirty inch versions. It has a mixture of a Armin wing and a FliteTest wing. It is designed to carry a GoPro and still have extreme performance.

Twin Boom Tail 60 inch V3 flight. (5 min 1 sec)

Posted by benjamin presten | Sep 14, 2014 @ 02:05 AM | 3,321 Views
The video is not of of the greatest quality but it shows what the airplane is capable of and how much fun I was having!!!!

Scratchbuilt funcub aerobatics (2 min 34 sec)

Posted by benjamin presten | Sep 13, 2014 @ 01:47 AM | 3,033 Views
I have built a flitetest simple storch and a Foamcub swappable now the fun/foamcub has been flow several times now but the storch remains electronic-less. I don't have pictures of the funcub but it looks astoundingly like a funcub.
Posted by benjamin presten | Sep 13, 2014 @ 01:44 AM | 2,972 Views
I finished flew and destroyed the bücker now but I got about 25 hours of flight time on it.
Posted by benjamin presten | Aug 28, 2014 @ 02:32 AM | 3,890 Views
I am just finishing up my Bücker Student Swappable model designed by nernic. I am hoping to have a maiden done by Friday or Saturday.
Posted by benjamin presten | Aug 27, 2014 @ 10:30 AM | 2,899 Views
Today is a sad, sad day as today I lost my beloved friend, Hyperion Yak 55SP. After a 35 turn tumble the right wing folded over and no matter how hard I tried it just didn't have enough aileron to hold a knife edge. When I arrived at the scene it was a grisly sight, there was blood (plywood and balsa) everywhere, the heart was still beating (ESC and it was actually beeping not beating) and the head (motor, firewall and cowling) was severed completely. As you can see in the picture I was devastated.
Posted by benjamin presten | Mar 27, 2014 @ 11:24 AM | 3,503 Views
I couldn't help but pust this picture of my families Piper Clipper. It is my favorite picture of it and I was looking at it and I decided to post it. The picture was taken by Roger Cain
Posted by benjamin presten | Mar 26, 2014 @ 07:52 PM | 3,965 Views
Title kind of explains it all