SMALL - Telemetry SMALL - Radio
Posted by XQPOWER | Today @ 03:15 AM | 120 Views
1) XQ-S8308N, a new 760μs professional tail servo newly released

Pulse width range: 760usec
Speed:0.038sec/60 deg at (6V)
0.042sec/60 deg at (4.8V)
Torque: (83.3 oz-in)
(62.5 oz-in)

2) 0.081s 17.0kg Brushless Servo XQ-S8308D

Speed:0.081sec/60º at (6V)
0.095sec/60º at (4.8V)
Torque: (236.1 oz-in)
(208.3 oz-in)

3) 0.092s 23kg Brushless Servo XQ-S8320D

Speed:0.092sec/60º at (6V)
0.11sec/60º at (4.8V)
Torque: (319.4 oz-in)
(277.8 oz-in)

4) 0.056s 8.5kg Brushless Servo XQ-S8308D

Speed:0.056sec/60º at (6V)
0.068sec/60º at (4.8V)
Torque: (118.1 oz-in)
(97.2 oz-in)

Precise,Fast and Strong.They are ideal servos for high-value airplanes and helicopters.

XQ POWER Marketing Department
Posted by FWAL | Today @ 01:51 AM | 173 Views
Not wanting to upset the family but still craving for a bit of flight time I was up and out early for a little slope therapy. This mornings slope was a short walk from my front door where I launched off the 6th tee of Langland Golf Course. It proved to be a really nice start to my Bank Holiday.
Posted by Nate0624 | Yesterday @ 11:12 PM | 289 Views
Posted by xplaneguy | Yesterday @ 10:30 PM | 382 Views
I thought you guys would like to see just a few of the RutanRC developmental models. Again, not production models but these photos will give an idea of what is in the works. Dan Kreigh (RutanRC Designer) has granted permission to post these photos and he is truly one of the good guys in our hobby. Please consider supporting Dan and the RutanRC Team as they work hard to bring the model aviation community new and exciting RC models of Burt Rutan's legendary designs.

The RutanRC Kickstarter campaign needs your help to get these and many more models of aircraft designed by Burt Rutan into production.

To help support this American company get off the ground, go to the link below to make a contribution:

Stay tuned for another exciting RutanRC developmental model next week.

Thank you for your time and support,
...Continue Reading
Posted by Band1 | Yesterday @ 10:28 PM | 343 Views
Almost ready for paint.
Posted by limspeedracing | Yesterday @ 09:49 PM | 354 Views
FEETECH NEW Digital servo 360 degree rotation
-Standard digital programmable Metal gears servo、2BB
-High quality core motor, no limits can 360 degree rotation
-Two working mode (servo mode and 360 degree continue rotation mode)
-Operating Voltage: 4.8V-8.4V
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm
Full Packaged
-Servo arm×1 bag
- Carton box
-GW: 86g
Posted by c/f | Yesterday @ 09:45 PM | 361 Views
Posted by The RC Addict | Yesterday @ 09:45 PM | 360 Views
Purchase frame from $15 :

Here is the flight that I promised you guys a while ago. It flies really nice with this frame and a JJRC 1000A performs even better! The wires are really thin and fragile so I highly recommend re-enforcing the solder and motors joints with hot glue. Thanks for watching and please subscribe and stay tuned for more!

Dreamcatcher Frame Flight, Hubsan X-4 Electronics (5 min 15 sec)

Posted by limspeedracing | Yesterday @ 09:44 PM | 361 Views
-Standard low profile programmable Metal gears digital servo
-High quality coreless motor
-All metal case and 2BB
-12Bit digital control system
-Operating Voltage: 4.8V-8.4V
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm
Full Packaged
-Servo arm×1 bag
-Carton box
-GW: 80g
Posted by The RC Addict | Yesterday @ 09:43 PM | 365 Views
Purchase from RTR ($99) :

Purchase from RTR ($100) :

I finally got my first ground vehicle! The Dromida MT 4.18 comes 100% fully ready to run and looks like a nice starting point for $100 and supposedly goes 20 Mph and is waterproof. Just a heads up, the plastic dog bones are fragile. You may want to pick up the aluminum kit for more durability. Amazon is not stocking the drive train kit anymore except for one seller but they are charging $35+$14 shipping so not worth it from them. Please subscribe and stay tuned for more coming soon!

Dromida MT 4.18 Unboxing (7 min 24 sec)

Posted by limspeedracing | Yesterday @ 09:37 PM | 372 Views
FEETECH New Humanoid Robot Profile
Feetech Robot FT ROBOT Show Motion Group Control (3 min 51 sec)

The FT-17DOF-SC-RTP is a ready to play humanoid robot which comes fully assembled & completed from our team at FEETECH.

This humanoid robot uses 17PCS FT-SCServo (SCS15).
SCS15 is all metal gear and uses TTL level Half Duplex Asynchronous UART BUS Communication Protocol. It gives the feedback of the data relevant to position, voltage temperature, load and speed.

This humanoid robot uses all aluminum alloy parts, anodized color (red, blue, white for optional) or an assortment.It is simple wiring and makes assembly and disassembly fast and convenient.

It is easy to use "MOTION" editing software for Windows system. As long as you use a computer you will love playing with this humanoid robot, even if you do not have any programming knowledge, you can edit the humanoid robot actions within ‘MOTION’ editing software.
Robot hobbyist can move the robot in a variety of different poses by hand, then read in and save data from robot joint SCServo via software, moving through the posture sequences from one by one will complete the program of series motion or dance. The data of dance or motion group can be saved into your local computer for use the next time, or download into the robot control board for offline operation.

The 2.4G remote control system is based on Arduino open source, users can freely modify according to our Arduino source and...Continue Reading
Posted by DimoX | Yesterday @ 09:35 PM | 368 Views
Nothing really exciting here... just my Second time flying this thing and attempting to get the feel for it's flight behavior in this mode. (usually takes quite a few flights to get the hang of any new bird!) Did my first FPV tree maneuver near the end. On the Third flight (posting soon) I went much higher, video to follow.

Second FPV Flight (5 min 29 sec)

Posted by oomodel | Yesterday @ 08:44 PM | 439 Views
One of the most exciting thing in the FPV world would be the dji phantom 3 has been released, it’s definitely intelligent, powerful, and the most important, it’s cheap

The main differences between the DJI Phantom 3 and Phantom 2 will be:

First of all, you don’t need to install gimbal nor image transition any more, the dji phantom 3 is all ready.

Secondly, dji phantom 3 has Lightbridge 2.4G built-in.

Thirdly, dji phantom 3 has inspire 1′s camera

Fourthly, dji phantom 3 has inspire 1′s radio and DJI PILOT software.

Last, dji phantom 3 is equipped with a 4480mAh 4S battery which offers a loaded flying time of 23 minutes, longer than dji phantom 2 though the battery is of lower volume.

We have every reason to believe the dji phantom 3 ( is smart choice for fpv addicts….
Posted by Trackercal | Yesterday @ 07:56 PM | 454 Views
Hey Congrats, enjoy your Quad, At 100 % sensitivity outside even in the wind she preform quite good. I think that has the best service from Asia. I am happy that it turn out good for you. Good luck and Best Regards.
Posted by Banzee | Yesterday @ 04:10 PM | 676 Views
I tried my Apprentice on water with the float kit !! First try , new moteur , new ESC , to fit the motor . Got more power , can fly with the throttle a little bit higher than half . Now need to learn how to turn with the drag of the float kit , cuz i saw that if i don't pull more on the throttle , the plane want to go down . Here the video , Enjoy !!!!
Posted by zanthor | Yesterday @ 03:32 PM | 711 Views
After a weekend of breaking props we realize you need to restock, use the code MAYPLAY at checkout for an additional 20% off your order of 5 or more items!

In stock now:
ABS 5030, 5040, 5045 as low as $0.60 each!
ABS 6030, 6045 as low as $0.75 each!
Carbon Fiber 5030, 5045 as low as $2.57 each!

Mix and match size, pitch, color and rotation to fit your needs. We designed our ABS discount to be flexible.



PS: We will be making an exciting announcement next week, check back!