Here is my new charging case and how I made it.
I have been carrying my chargers and power supply in this case, and then when I got to the field, I had to take it out and set it all up. So I wanted to make a case that everything is in. I also needed new power supplies to power my iCharger 306b and the rest of my chargers. I set my case up so that I have the power supplies and all the wiring underneath a shelf. On this shelf is where my chargers sit. I also put 5 sets of binding posts on the shelf so that I can easily plug and unplug my chargers.
Here is the product links to everything I used in my build:
Case - http://www.harborfreight.com/18-x-12...ase-69318.html
Power Supplies - (2) HP DPS-600PB from Ebay
Binding Posts - http://www.allelectronics.com/make-a...NG-POST/1.html
Wire - Red - http://hobbyking.com/hobbyking/store..._1mtr_RED.html Black - http://hobbyking.com/hobbyking/store...mtr_BLACK.html
Fans - http://www.allelectronics.com/make-a...ING-FAN/1.html
Fan Guards - http://www.allelectronics.com/make-a...MM-FANS/1.html
Ring Terminals - http://www.allelectronics.com/make-a...-YELLOW/1.html
Plastic Shelf - http://www.amazon.com/Install-Bay-89...ds=abs+plastic
Power Receptacle - http://www.allelectronics.com/make-a...EPTACLE/1.html
I started by cutting out the foam on the bottom of the case. This is so the power supplies have something stronger than the foam to be mounted to. I then cut out the foam on the sides of the case where the two...Continue Reading
I have been carrying my chargers and power supply in this case, and then when I got to the field, I had to take it out and set it all up. So I wanted to make a case that everything is in. I also needed new power supplies to power my iCharger 306b and the rest of my chargers. I set my case up so that I have the power supplies and all the wiring underneath a shelf. On this shelf is where my chargers sit. I also put 5 sets of binding posts on the shelf so that I can easily plug and unplug my chargers.
Here is the product links to everything I used in my build:
Case - http://www.harborfreight.com/18-x-12...ase-69318.html
Power Supplies - (2) HP DPS-600PB from Ebay
Binding Posts - http://www.allelectronics.com/make-a...NG-POST/1.html
Wire - Red - http://hobbyking.com/hobbyking/store..._1mtr_RED.html Black - http://hobbyking.com/hobbyking/store...mtr_BLACK.html
Fans - http://www.allelectronics.com/make-a...ING-FAN/1.html
Fan Guards - http://www.allelectronics.com/make-a...MM-FANS/1.html
Ring Terminals - http://www.allelectronics.com/make-a...-YELLOW/1.html
Plastic Shelf - http://www.amazon.com/Install-Bay-89...ds=abs+plastic
Power Receptacle - http://www.allelectronics.com/make-a...EPTACLE/1.html
I started by cutting out the foam on the bottom of the case. This is so the power supplies have something stronger than the foam to be mounted to. I then cut out the foam on the sides of the case where the two...Continue Reading
Zach & Dan 3DHS 71" Slicks Duo Flight
Here is a video of me and a friend flying our 71"/70" Slicks together! We were just messing around and practicing harriers. Watch in HD.
| Zach & Dan 3DHS 71" Slicks Duo Flight (6 min 55 sec) |
Multiplex FunCub Low and Slow + 3D
Here is me flying my funcub! I was doing some low and slow passes with some 3d mixed in! Watch in HD.
| Multiplex FunCub Low and Slow + 3D (7 min 49 sec) |
3D Hobby Shop 58" Edge
Onboard the Mini Popwing!
I put a little keychain camera on my mini popwing and flew it around my neighborhood.
| Onboard the Mini Popwing! (8 min 12 sec) |
Parkzone VisionAire Having Some Fun!
Just me having some fun with my VisionAire in my backyard! Watch in HD.
| Parkzone VisionAire Having Some Fun! (3 min 10 sec) |
3Ding my FunCub
Here's me flying my funcub from yesterday! Thanks NJSwede for the video! Watch in HD.
| Zak 3Ding his FunCub (2 min 8 sec) |
Parkzone VisionAire 5th Flight
Here is my 5th flight on my Parkzone VisionAire! In my backyard! Watch in HD.
| Parkzone VisionAire 5th Flight (4 min 4 sec) |
Parkzone VisionAire 4th Flight
Here is my 4th flight on my Parkzone VisionAire! In my backyard! Watch in hd.
| Parkzone VisionAire 4th Flight (4 min 16 sec) |
3DHS 33" EPP Extra Indoors + Mid-Air!
Here's a video of me flying my 3DHS 33" epp extra indoors at a fun fly I went to yesterday! One of my mid-airs from yesterday is in there too! Watch in hd.
| 3DHS 33" EPP Extra Indoors + Mid-Air! (6 min 36 sec) |
3DHS 42" Slick backyard flying!
Me flying my 3DHS 42" slick in my backyard! Watch in hd.
| 3DHS 42" Slick backyard flying! (4 min 26 sec) |
I just got an iCharger 306B today! It looks awesome! I can now finally charge my batteries for my 71" slick faster than like 1 and 1/2 hours! I can also parallel charge multiple batteries at once to cut down charging time!
The iCharger 306B can charge up to 30 amps and 6s lipos! To take full advantage of the charger though, you need to use a 24v power supply. I am in the process of taking two HP DPS-600PB computer power supplies and making them into one 24v power supply!
I ordered the iCharger from EP Buddy and I highly recommend them! Great service and fast shipping! What's neat about them is they include a free paraboard to parallel charge up to 6 batteries at once!
Here are some pics of it!
The iCharger 306B can charge up to 30 amps and 6s lipos! To take full advantage of the charger though, you need to use a 24v power supply. I am in the process of taking two HP DPS-600PB computer power supplies and making them into one 24v power supply!
I ordered the iCharger from EP Buddy and I highly recommend them! Great service and fast shipping! What's neat about them is they include a free paraboard to parallel charge up to 6 batteries at once!
Here are some pics of it!
3DHS 33" EPP Extra fun in the snow!
Here's me flying my 3DHS 33" epp extra in the snow! Watch in HD.
| 3DHS 33" EPP Extra fun in the snow! (4 min 10 sec) |
3DHS 71" Slick Second Flight
Here's me flying my 3DHS 71" slick! It's only my second flight on the plane. Watch in HD.
| 3DHS 71" Slick Second Flight (6 min 48 sec) |
3DHS 42" Vyper Bype evening hucking!
Parkzone F-27Q Stryker Flying
3DHS 42" AJ Slick last flight of the day
Foam Delta Plane Flight
This is me flying my delta airframe that I got for free here at rcgroups from JimStanmore! I have to thank him a bunch for that!
| Foam Delta Plane Flight (3 min 56 sec) |
3DHS 33" EPP Extra Front Yard Flying!
Me flying my 3dhs 33" epp extra in my front yard!
...Continue Reading
| 3DHS 33" EPP Extra front yard flying! Flight 1 (5 min 1 sec) |
...Continue Reading
3DHS 33" EPP Extra flying in some wind!




