Comments (3)
Add Comment
-
Views: 2133
First things first. Find the power connector on the module board (the smaller of the 2 boards in the Tx). -
Views: 2021
Unplug it. I removed the connector as I save them. -
Views: 1967
Remove charge jack. It might be a little sticky at first but it will come out without damage. -
Views: 2332
Solder on longer wires. For those outside the US, I used black for live as that's the color code here and I only had black and white wire. I cut mine to 3" (80mm). -
Views: 2065
Soldered and shrink wrapped. -
Views: 2253
This is where you'll be soldering the wires. I used a no-lead w/2% silver solder here for strength. CHECK and RECHECK YOUR POLARITY -
Views: 2119
Soldered and shrink wrapped -
Views: 2057
Finished
Sticky:
Mini Telemaster
Sticky: