uuustore1's blog View Details
Posted by uuustore1 | Nov 10, 2014 @ 08:46 AM | 5,859 Views
This is a new designed Transmitter works on 5.8GHz full band 32 channels. It is whole alloy cased and the heat-sinking is very effictive. Works on 2S to 6S wide voltage. LED Digital Read-out and very simply operation.


Alloy Transmitter AT32H Fetures:
* The button automatically locked in case of mistake hangling.
* The Power-amplier protection fuction to reduce the chances if no antenna on the Tx when power ON.
* Built-in high quality Audio processor
* The transmitter comes with high quality mushroom antenna to ensure the great performance

Specifications:
* Transmission Frequency: 5.8GHz
* Working Channels: 32CH
* Output Power: 600mW
* LED digital read-out for channels display
* A-button operation, very simply use

Fetures ONE of Alloy Transmitter:
* 32 Channels 5.8GHz 600mW


* 2S ~ 6S wide range voltage
* A-button operation, simple use
* LED digital-read for channels change

...Continue Reading
Posted by uuustore1 | Sep 04, 2014 @ 05:04 AM | 7,791 Views
The lightest video transmitting, 32 CH points. Ultra small super light sensitivity. New listing.

Small size 26*20*8mm

Characteristics of 5.8G transmitter:

5.8G broadband FM synchronization of audio and video transmission.

High emission power 200MW 23db.

Built in four frequency selectable

5740-5860MHz / 5705-5925MHz.5725-5865MHZ/5733-5866MHZ

32 transmit channel.

Small size 26*20*8mm

Light weight: 6g (not including antenna).

Stereo, left and right channel independent transmission.

All standard PAL / NTSC.

Input voltage range DC6-24v.

Equipped with a 5dB antenna.

The channel map:

Posted by uuustore1 | Aug 16, 2014 @ 05:33 AM | 6,999 Views
Skyzone 32CH 5.8GHz FPV Micro 500mW AV Transmitter TX TS58500
Features

32 channels: Cover A, B, E, F bands

Micro size and light weight

Output Power: 500mW

Transmitting distance: >3000m line of sight


Specifications:

Operating Voltage 7 - 24V

Supply current 220 mA

Video Band Width: 8.0 MHz

Audio carrier Frequency 6.5 MHz

Video Input Level 0.8 1.0 1.2 Vp-p

Video Input Impedance 75 Ohm

Audio Input Level 0.5 2.0 Vp-p

Audio Input Impedance 10K Ohm

Antenna Connector: SMA Connector

Video Format NTSC/PAL

Output Impedance 50 Ohm

Dimensions (L x W x H) 42x23x8mm

Weight 10g

Posted by uuustore1 | Jul 25, 2014 @ 05:31 AM | 8,157 Views
Features:

Special features:
- Super mini, super light, specially designed for mini quadcopter/ multicopters.


Specifications:

Super Mini 7.3g 5.8G 32Ch 200mW A/V Transmitter Module (TX) TS5823/ RP-SMA, jack
Transmitting unit weight: 7.3g (excluding antenna)
video format supported: NTSC/PAL
Working frequency: 5645-5945Mhz
Power input: 7-24V
Transmitting current: 190mA 12V
Video band width: 8M
Audio coding: 6.5M
Dimension: 30*20*8mm (excluding antenna)
Antenna connection: RP-SMA jack (TX module side), Please see the photo below:


*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.



...Continue Reading
Posted by uuustore1 | Jul 23, 2014 @ 10:40 PM | 6,728 Views
We have assembled it and balance it for you, it is ready to run.

Specification:
- Named: 3 Axis SMART Gopro Brushless Gimbal
- Material: Aluminum Alloy and Plastic Parts
- Top Part: Glass Fiber Plate(2pcs)
- Total Weight: 362g (including packing box)
- Plug and Play

Package Included:
- Whole Set Gimbal Frame
- 3 Pcs GM2210 Gimbal Motor
- 1 Sets Mini 3 Axis AlexMos Controller Board
- 1 Pcs Color Printed Box
Posted by uuustore1 | Apr 11, 2014 @ 06:17 AM | 8,073 Views
Introduction:
- The first UHF solution support 16-chan perfectly, proven with Taranis X9D and Jeti DC16. Based on the latest RF solution, super high sensitivity as -115dBm. Proven robust super fast frequency hopping algorithm, combined with Unique ID for every module(RAFHSS), ensure the excellent interference-immunity capacity. Support nearly all radios in the market from 2 channels to 18 channels if there is a trainer port included. Low and high power mode switchable(400mw and 800mw)
- Failsafe set in the Tx side by simply pressing one button. Support both 2-axis and 3-axis head-tracker directly, and randomly mapping the tracking channel among the 16 channels.
- Support 2 PPM source input separately and randomly mapping
- Support 1 Tx to multiple Rxs and multiple Txs to 1 Rx.
- Frequency band configurable among 410-510Mhz(default 431-441Mhz). Micro USB port included for configuration and firmware update, no need extra flash tools, no need any driver installed, support all OS systems,supper easy to use. EXT port for extension, support Futaba Sbus and Spektrum/JR Satellite port and plan to support Joystick control, etc. Dual-direction communication is ready. Rich audio warnings for low voltage, wrong PPM connection or input, power switch, failsafe setting, binding, etc. Custom brushed metal case, well shielded and good heat dissipation, the lightest weight(64g only) make it easy to set up to your radio and won’t affect the COG.
- Diversity receiver with dual LED indicators, greatly improve performance.
- CPPM output in separated channel in the Rx side.
- RSSI output(analog buffered) in separated channel in the Rx side.
- Can-bus interface included in the Rx side for extension.
- Custom antennas with low VSWR for best performance.
- Different receivers to choose for different applications Fully tested with Futaba, Spektrum/JR, Turnigy/Flysky/imax 9x2, Frsky Taranis, Jeti, TDF, walkera, etc.

Cool / Posted by uuustore1 / Apr 11, 2014 @ 05:53 AM / 7,101 Views / 0 Comments / Reply
An infraction has been issued for this post.  Infraction type: Excessive Advertising (Spam)  Comment: Not edited properly
Cool / Posted by uuustore1 / Apr 11, 2014 @ 05:34 AM / 7,037 Views / 0 Comments / Reply
An infraction has been issued for this post.  Infraction type: Excessive Advertising (Spam)  Comment: Not edited properly
Posted by uuustore1 | Apr 11, 2014 @ 05:25 AM | 7,046 Views
FPV AIO monitor RC701,5.8GHz Wireless FPV 7" LCD Diversity Receiver Monitor for wireless TX transmitters,FPV wireless receivers

1. Screen size:7 inch
2. Screen type: TFT LCD Screen/long life, LED backlight
3. Resolution: 800*480
4. Brightness: 450cd/m2
5. Contrast: 500:1
6. View Angle: 140/120degree (Horizontal/Vertical)
7. Working Voltage: DV 7-12V(center positive) or 11.1V Li-battery
8. Power Consumption: < 8w
9. Size: 180mm x 120mm x 23mm
10. Built-in 5.8Ghz Dual diversity receiver automatically for best reception
11. Built-in 2CH 5.8Ghz AV output and 1CH AV input
12. Support 9 languages menu selection
13. Working temperature: -10~+ 65

Features:

1. Built-in Dual Receiver Automatically for best reception Automatic Antenna Switching
2. Dual buffered AV outputs
3. Can receive 2 different channels at the same time
4. Not affect by 2.4GHz R/C Radios
5. AV Receiver with Diversity inputs
6. Small, light weight, durable

Working frequencies

...Continue Reading
Posted by uuustore1 | Mar 31, 2014 @ 07:12 AM | 9,434 Views
About Range about Boscam FPV system
Boscam 5.8g 200mw Transmitter TS351 and Receiver RC305 :2km

Boscam 5.8g 400mw Transmiter TS353 and receiver RC305 :3.5km

Boscam 5.8g 500mw Transmiter TS352 and receiver RC305 :4km
...Continue Reading
Posted by uuustore1 | Dec 16, 2013 @ 08:39 AM | 6,335 Views
DJI Phantom Gopro 2 3 Metal Brushless Camera Gimbal w/Motors & Controller RTF for Gopro3 FPV Aerial Photography
Features:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls,easy to adjust
- Compatible with Gopro 3,2,1
- with 2pcs 2208 motors and BGC2.0(the new vervion) gimbal controller,sensor
- with motor protector which can help heat dissipation
- Gimbal weight:400g
this is RTF version Assembled & dubugged,you only need connect the battery on the plug,then it can work directly.
the Gimbal work alone,it don''''t need the NAZA support,very easy for use.

UUUSTORE DJI Phantom Gopro 3 CNC Metal Brushless Camera Gimbal 1080P (3 min 2 sec)