SMALL - SMALL - Telemetry SMALL - Radio
chanyote66's blog
Posted by chanyote66 | Feb 26, 2015 @ 01:02 PM | 2,351 Views
Ultimate Goggle battery 2s 3400mah (Li-Ion)

I use these for everything now! all goggles and even have one for my rc truck's fpv gear! Its nice to know that your goggle battery is the last thing to worry about while in the field... Unless you didnt charge it the last few times flying

Check it out here:

Name: _DSC4039.jpg
Views: 0
Size: 246.8 KB
Posted by chanyote66 | Feb 20, 2015 @ 10:55 PM | 3,432 Views
Whats on the Printer - 2.2 beadlock! (3 min 50 sec)

Hey everyone!

This is the first video of my Whats on the printer series, where Ill be covering 3d printing and RC! This one needs a little work and ill fine tune the timelapse videos including links to the parts once complete and information on 3d printing.

The Printer:
Prusa i3

LCD/SD reader
Custom Spool holder

The Print:
This is a 2.2 size beadlock that has been oversized to stretch a 2.2 tire, it is slightly wider and larger diameter for a super strong fit for the most demanding torque. This is my first rim designed which took a total of 6 hours to print.

The Pros:
This rim cost $1.20 in material and $.34 in electricity
4x rims = $6.16

If you factor my time in you are still looking at only $26.26! for a set of 4

These are for my axial wraith that will be revived for its return of the Wraithventures videos after a few more modifications.

Future prints:
Mobius or HD808 pan tilt for in the cockpit.
Mud guard plates
Battery Trays
High center recovery system
Rollover correction system
Dash/Steering wheel/controls
and more!

About the Prusa I3:
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr. The i3 incorporates lessons learned from the previous two Prusa designs, as well as other popular modern RepRap designs.


Plastic Parts (exc. Extruder) 26
Non Printed Parts approx. 337
Cost $300-1000?
Controller Electronics Almost all RepRap
Printing Size 200 x 200 x 200
Motors 5 x NEMA 17 Stepper
Frame Material 6mm Aluminium
Frame Manufacture Laser Cutter,
Pro Easy assembly Rigid XZ to Y Connection
Con Specialized Tools to make some parts

Some links for info on a Prusa 3d printer:
Posted by chanyote66 | Feb 02, 2015 @ 10:15 PM | 2,714 Views
Hey Everyone!

Cellphone Giveaway! (6 min 4 sec)

I was just browsing a few of the online stores I often buy from and found that Tinydeal is running a special! They are wanting to get people involved and provide better customer service so they made a forum where customers can discuss products and get great customer service from the staff of!

They are not a direct competitor to the other RC forums, but they provide great support if you have questions or just want to post a review of products or service! Iv ordered a few things from them now and got excellent service, any questions were answered promptly and they are very helpful in finding the correct product you are needing!

it is only running for a few days and has some nice products they are giving away!

Well on to the good part!
Heres the link to the deal:

How to Participate:
1. Register for account and reply to the above thread.
2. share the thread anywhere! Facebook Twitter, Reddit. and post the link to your post in the thread.

Dates: today to 10 FEB 2015

They will use to select the winner!

they must have 100 participants to unlock the grand prize. (think they are close to that right now)

But hey, spend a few minutes and enter to win! even if the phone is not compatible with your network, you can use it as a tablet... trade it... sell it... whatever

and the pedometer and battery pack are great for every day use!

...Continue Reading
Posted by chanyote66 | Jan 26, 2015 @ 10:17 AM | 1,946 Views
Hey everyone!
Just found a good price for a 7" screen. I have one on the way to make sure it does not blue screen or if it does, that it will be usable for FPV
Posted by chanyote66 | Jan 21, 2015 @ 10:14 PM | 2,311 Views
Hey everyone!

Just found a great deal for those that may be interested in FPV but not want to take the massive leap into FPV with all of the different equipment.

This Quadcopter has an actual 5.8ghz video link, headless mode, and some great features for starting in FPV. Or if you have a kid or friend that is asking about FPV, show them this! they can start without investing $$$ in all kinds of rc equipment! I have not tried this one yet, but I may be reviewing it if there is enough interest in it!

And if you wanted FPV on something else... the camera is modular!

10% off code: 10offv6

Name: 1_01.jpg
Views: 0
Size: 149.5 KB

Not a great video but you can see one flying here

They also have a mini quad for indoors for under $17 right now!
Name: 1_01.jpg
Views: 0
Size: 84.7 KB
Posted by chanyote66 | Jan 11, 2015 @ 06:14 PM | 1,966 Views
Do you have a kid, or kid at heart, that wants to fly rc planes? why not start with a paper plane? Check out the Dream1 from FlyDream. This is a motion sensing remote with a tiny power system for paper planes!
Dream1 - RC Paper Plane! (8 min 56 sec)

Posted by chanyote66 | Dec 19, 2014 @ 12:29 AM | 2,085 Views
Do you fly mini quads or mini fixed wing? Check this thing out!!!

Only $30 its a perfect price to stock up! and the guys at DTF do some great research on quality transmissions.

Name: FPVSTYLE-c305265f-13a8-41a4-9010-ce23e60e2757.jpg
Views: 0
Size: 41.9 KB
Description: Name: FPVSTYLE-23ea1fe1-46be-4dc6-9cb2-64f1b77be070.jpg
Views: 0
Size: 36.8 KB
Posted by chanyote66 | Nov 24, 2014 @ 05:00 PM | 2,237 Views
Has anyone seen this? Lets just say the Price is going to have people amazed!

Lets get some feedback on this! Id love to see how a full FPV kit could be for mini quads!

Name: banner20141119153642unicorn-banner740.jpg
Views: 0
Size: 142.3 KB
Posted by chanyote66 | Sep 04, 2014 @ 06:39 PM | 3,874 Views
Group Buy is live!

The Specs:
250 Quad frame (green/red/blue hardware)
4x 1806 Emax motors
4x 12A simon Series ESC's
CC3d flight controller
Two pair of carbonfiber 5x3 props (now three pair if we get 10 people)
A quick price comparison
The frame goes for $50
The motors go for $15-$18
The ESC's go for $8:30 a piece:
The props go for $5 a pair:
The cc3d goes for $66:
So in a quick total without shipping it would be: $217 to get them from other places. a quick shipping calculation and it would be: $242
The break down that I was able to work out would be:
3-5 people: $175 shipped USA
5-10 people: $165 shipped USA
10+ people: $155 shipped USA

Power Distro Board Included!

If your interested Message me or check out the facebook group for the most up to date answers!

Facebook (may have to join the group):
Posted by chanyote66 | Aug 28, 2014 @ 11:20 AM | 3,377 Views
Labor Day Sale!
I am marking my FPV cables for the mobius down by $5 for this weekend! These cables work for the mobius as well as the HD808#16v3. I will throw in a spare cable for any orders over 5 as well! so get your friends together... save on shipping... and get a extra cable

Fatshark/boscam cable:

Standard cable:
Posted by chanyote66 | Aug 26, 2014 @ 05:21 PM | 3,175 Views
Running a little behind on my Quick tip of the week video. This week I talk about the Taranis and connecting LRS systems to different outputs and how to select each in the model menu.

Quick tip of the Week - Taranis Output capabilites (3 min 6 sec)

Posted by chanyote66 | Aug 24, 2014 @ 11:47 AM | 3,712 Views
Atom RC Bee 450 Quadcopter Review repair (5 min 5 sec)

I am currently working on the writeup of this quad and will post the links once ready.

Posted by chanyote66 | Aug 14, 2014 @ 11:28 PM | 3,719 Views
FPVStyle com - Aomway 200mw VTX (5 min 59 sec)

Check them out at
Posted by chanyote66 | Aug 12, 2014 @ 06:55 AM | 3,335 Views
Hey everyone! is having their second Flash sale for a Handheld brushless gimbal! Since the first Flash sale was so popular for the ANT ARF Kit for only $249.

This weeks Flash sale is a full Ready to Record set for those wanting to record from the ground or do reviews! This thing works great and is very stable. With a great range of motion, the CUBE 3 axis gimbal provides plenty of smooth motion to stabilize just about anything you can throw at it!

Steadi Cube 3Xs Handheld Gimbal for Gopro 4--Aliencopter (1 min 23 sec)

...Continue Reading
Posted by chanyote66 | Aug 11, 2014 @ 04:37 PM | 3,294 Views