Archive for February, 2010
-
Views: 353
TopModel Gem. Not finished but Turnigy 3548 900kv motor, 11x10 Aeronaught prop, esc donated to FJ as not big enough, bad servo choice, waiting to be replaced. -
Views: 260
Graupner Chili. Ebay BARGAIN (£27). Turnigy 3548 1100kv motor (should have been a lower KV), 70a opto esc, HS82MG servo's. -
Views: 247
Blizzard. Now a sloper due to 'issues'. Better as a sloper than a power model for me. Yep, Zebra MG servo's. -
Views: 232
PZ P51 BNF. I needed something slow to relax with. Perfect. I like this plane. Corsair prop fitted and a 35a Scorpion esc. -
Views: 295
HET Kawasaki K68i Tony Kien, (I think that's what it's called). 18a 2700kv brushless inrunner,40a super simple esc, 4.7x4.7 prop 9g servo's unknown make. Small, fast (ish). Downside (for me) is it's balsa. -
Views: 249
P Pretty. Standard, JP servo's. Now looking rough, but good for chucking about on the slope -
Views: 248
FVK Banbit. Turnigy 3548 800kv motor. 80a Turnigy esc, HS82MG servo's. Not maidened yet, A few props to try starting at 13x11 on 4s -
Views: 261
Zagi. KD 2847 2300kv 25a inrunner. 5x5 prop, 30a esc, carbon rod reinforced after snapping it pulling out of a dive. Technically not mine so chucked about and abused. Motor pod binned, foam hacked at to put bit's inside.
Comments (0)
Add Comment
Not much of a blogger, but thought I'd post a few pics of the fleet, past and present. There's a couple I've got that I don't have photo's of, as the Mrs doesn't know about them yet 
. I'm sure you know what I mean 
.
Comments, humour, questions and light hearted banter welcome (what goes around, comes around, don't give it if you can't take it). Alternate points of view also welcome, we don't have to agree.
I'm English, NOT British. And so's my sense of humour. I laugh at myself so I can laugh at others.
Tons of people on this forum know more than me, so don't get too tech, I probabaly won't know. Unless your'e trying to confuse me.
Mistakes will be made, opinions may change.
. I'm sure you know what I mean .Comments, humour, questions and light hearted banter welcome (what goes around, comes around, don't give it if you can't take it). Alternate points of view also welcome, we don't have to agree.
I'm English, NOT British. And so's my sense of humour. I laugh at myself so I can laugh at others.
Tons of people on this forum know more than me, so don't get too tech, I probabaly won't know. Unless your'e trying to confuse me
.Mistakes will be made, opinions may change.
-
Views: 320
Stryker. Bashed, crashed, doesn't look like this anymore. Need a new 1. Turnigy 2700 inrunner, 40a esc, Zebra MG servo's (Too small, not enough servo arm travel for me) -
Views: 265
Velocity. Carbon spars (2), tape, fibreglassed motor mount. Pretty tough, I like this plane. Keda 2213 2700kv outrunner, 40a esc, Zebra MG servo's. -
Views: 304
FJ. Yellow is tape, red is signwriters vinyl. Love this plane. Turnigy 2836 2350kv motor, 45a Scorpion esc, HS81 servo's -
Views: 304
Mouton. Imported from the good 'ol US of A. Crashed on maiden, snapped wings. Repaired by LHS. Probabaly could have done better myself. Suppo 2217/6 1500kv motor, 40a esc, Zebra MG servo's -
Views: 270
Fantasy Angel (Kyosho Stratus/Stratos copy). Ebay bargain at £45. KD 2217-20T 22A 860Kv (220W) Brushless Outrunner Motor, 40a esc, can't remember but prob Zebra MG servo's -
Views: 260
Projeti. Balsa elevons, Turnigy 2836 3200kv motor. Emax 60a esc, servo's need changing, HS82MG's will be fitted.
