Recently updated my business website, Custom FPV Setups. Put on some new information, and working on the mobile site as well. Business is in full swing, spring time is a great time to get ready for the summer flying season!
My Axial SCX10 Deadbolt (only upgrade is aluminum steering pushrod). Spring is coming... eventually... and everything's melting. WARNING: the RX box in the stock Deadbolt is NOT WATERPROOF, it has a big hole in the side (LOL) for the RX wires. You have to waterproof it yourself. I used a balloon, zip ties and a little hot glue to completely seal both the box and the RX itself inside the box just in case.
The truck performs VERY well though in these conditions. SUPER torquey.
More Mw = More Range? 0:27
Lower GHz = More Range? 5:36
OSD w/RTH = Necessity? 8:14
Diversity = Perfect? 10:38
Flying behind obstacles? 15:05
Long range = More fun? 16:23
Spektrum = OK for FPV? 19:13
Posted by DJO |
Feb 15, 2015 @ 04:50 PM | 2,875 Views
For anybody who's interested in pure gliders, here's a ready to assembly high start kit for about $30, called the "Up Start" by Dynaflite. Looks good to me so far.
~300 feet of launching space needed for a 200 foot launch. Takes up to 3m wingspans from what I've read so far. There also is a 2m or less version with 1/8'' tubing compared to this one which has 3/16'' tubing.
For the past 2 years I've been customizing FPV systems and setups for members on RCGroups and worldwide. I take into consideration
what you tell me about your area that you fly in, and the aircraft that you're planning to fly FPV with, and build you a custom setup that is
built specifically for your needs. I work with you on what kind of range you should expect, as well as how you should go about installing the
components on your aircraft. I'm always available for extra support if needed, for questions about setup, flying, or upgrading in the future.
This service eliminates any questioning or confusing between electronics compatibility, and you only have to order once and pay once, no
separate orders for different components, I handle all of the research for what's in stock and where. Once you contact me and I figure out
what components you need, you pay, I buy the components and solder up your setup, test it, and ship it out to you! I always make sure
everything is working 100% before shipping out. I work quickly and don't waste time. I can do budget setups with the equipment that I
know is good but inexpensive only - no junk.
The pics below are of setups that I have built myself. They are all constructed like I would construct my own FPV systems. The pics below
are only a very small amount of setups that I have done, I have also worked with various OSD's as well as different goggles, monitors,
transmitters, and so on.
Many if not all of my setups built over the years are still flying today!
PM / email me or we can talk over phone, (contact me with your number). PayPal ONLY.