HobbyKing.com New Products Flash Sale
pjdog350's blog
Posted by pjdog350 | Mar 06, 2015 @ 04:47 PM | 3,836 Views
I started another little quad. While getting motors for almost nothing I came across a little quad frame for $ 13.00. I'm putting the A2212-930KV motors on it.
I just bought another KK2 board. It's auctioned as being in the USA but I got a notice from HobbyKing that they had shipped it today??? I searched EBay so I could find a KK2 that was already in the States so I would not have to wait for delivery. So much for that! I'm going to use a $ 4.00 receiver I got many years ago from Target Hobby.com. It's a clone of a AR6100E Spektrum receiver. I've used this receiver before to fly a fixed wing and it works fine.

In the assembly process I'm to the place where I need the spider for the esc's to plug into. So now I have to start soldering the plugs together. Then I'm ready for the KK2 board..

I really enjoy putting these little multi rotor copters together and setting them up. But then I'm pretty much done with them. I gave two quads away to my grand sons for Christmas along with DX6I's. I also gave them both a 450 size single rotor. This summer they will be getting another quad each. They are 5 & 16 years of age. They are the next generation of RC'ers. Both are great kids.

UPDATE:
I guess HK has a location inside the USA. The KK2 I bought on EBay has already showed up. Yesterday the USPS man put it in my mail box. So now I'm good to go with the finishing setup. I had complained about thinking I was in for a long wait after finding a KK2 with a USA location. Then got...Continue Reading
Posted by pjdog350 | Feb 06, 2015 @ 12:01 PM | 2,739 Views
Today I got the H500 V3 hexcopter I ordered from Hobby King a few weeks ago.
One thing I really liked was that the kit contained the screws to attach the motors. First time this has happened to me. I've been get T2212 930Kv motors on Ebay for only $ 11.00 to $14.00 for four (4) motors. That's what they normally charge for one motor? I'm not real happy with the prop holder on these new t2212 930KV motors but I'll work around that.

The first T2212 930KV's I got from Hobby King. They came with a good prop holders and with the 3.5 mm brass fittings for the motors & Esc's. These new motors don't have the 3.5 mm brass fittings with them. I had to order them separate. They where a little pricy and they charge for shipping was higher than I thought it should be. But the savings on the motors made it worth it!

Started the assembly today. I'm still short two (2) motors. They are in the mail. I also need ESC's and a KK2 board!

UPDATE: I just got 6 40A ESC's with 6 extended legs for the hexcopter. Got them all for just $ 44.90 plus one dollar shipping on EBay. User
id is Fatboy05. That's just $ 7.00 each for a 40A esc.

The Gold plated connectors showed up today. I got them soldered to the motor ends.

The 30A ESC's showed up today along with the extended legs!

Got the KK2 board today (2/24/2015) along with 4 more T2212 930KV motors.

I have tried to calibrate the motors twice. But they do not come on together? Seems like I always have trouble calibrating...Continue Reading
Posted by pjdog350 | Jan 20, 2015 @ 10:17 AM | 2,527 Views
As luck would have it. I saw a real B-17G fly over my house in Florida at about 10:50 this morning. It looked like a g model as she had a chin turret and a red horizontal stabilizer.

I didn't have my camera. By the time I would have run inside and grab the camera she would have been to far away. The GoPro was just inside on the Kitchen table but the GoPro hero 3 does not have zoom!!!

What a great day for a WWII plane lover!

Jack

B-17G video at Brooksville airport 1 (1 min 6 sec)


...Continue Reading
Posted by pjdog350 | Jan 16, 2015 @ 01:24 PM | 2,679 Views
It's really hard for me to believe that a person in 2015 that can read and write thinks it's OK to dispose of a battery (Any battery) by throwing it in the common trash. The EPA wants all batteries placed in a toxic disposal place. Here where I live we have several places to do this. One is at the local library the other is Radio Shack. They have a special place to put spent (Used) batteries. The Library then has their waste management people put the battery material in the proper waste facility. This is to insure that the water we drink is as free of toxic material as we can make it.

But - There are those people that still feel that if the battery has been made inert that it is then safe to put in the common trash. This is so upsetting. A person with the skill to read and write feels nothing for those that may be hurt with their toxic waste. Lipo batteries are very toxic. They can be reduced to a level that they will no longer explode if damage or if the leads should be crossed. To do this you just remove the leads, place the Lipo battery in a solution of salt water for a period of time. I soak them to four week to insure they are inert. Then get them to a toxic disposal facility. Do this for all batteries whether they are Lipoís, Alkaline, rechargeable Ni-cads, Lead acid automotive batteries. All batteries.

I stated this in a post and have been notified by RCGroups that I've been a bad. Had to remove my post but I still feel the same. I don't want to cause anyone damage with my waste products and go out of my way to pass that information along.

We must respect our environment if we want our kids and grandkids to have as good a place to live as we have had.

The picture attached are all batteries waiting to go to the local Library battery waste basket! The Right thing to do!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The blog is not meant to offended anyone itís just what I feel is the correct way to handle batteries as to not
Destroy or bring toxic waste into the environment!
Posted by pjdog350 | Jan 10, 2015 @ 07:24 PM | 2,025 Views
My woody quad had a warped arm. I was afraid that the wood would warp but went ahead with the build anyway. Sure enough the rear left arm has a slight twisted in it. This causes me to have to put a smidgen right rudder in the wood while flying. I don't want to mess with it so I bought a new plastic kit from Xheli, I thought it was a 450 but as it turns out it's a 360? Oh well! I remove all my gear off the woody and placed it on the whirlwind 360. It's almost ready for a flight. Just need the Velcro, battery strap & the receiver taped down and we are ready. maybe in the morning?

Cold windy day with Whirlwind 360 (7 min 50 sec)


Did a night video with led lights. Kinda boring but I did it.
...Continue Reading
Posted by pjdog350 | Jan 03, 2015 @ 01:21 PM | 1,426 Views
I got my woody quad running today. My buddy in Portugal (Tom Bale) gave me some help last night. I flew it yesterday but she was way out of trim??? I knew using the trim tabs on the TX was not the way to go but I tried it anyway. Then I set the tabs back and using the KK2 board receiver test set all to zero '0'.

Then I went to the ACC and did another calibration. that did the trick. Now I have another quad.. Well really I only have one quad. The 'Woody" as I gave the other to to my grandsons. They love them.

here's a video of the maiden flight. It's super windy here today so I stayed close to the ground thinking a crash would be less effective. But then again I was fighting ground effects from the prop wash?

I think I'll charge up some 2200 mAh batteries for a night flight. The quad has lights on it?


Woody Maiden flight (3 min 24 sec)

Posted by pjdog350 | Dec 26, 2014 @ 07:48 AM | 1,779 Views
I got a new DX6 TX which meant that the DX6I's I has I didn't need. My grandsons wanted quads so I gave them two quads A built a few years ago. A HK X525 and an HK Whirlwind. The boys sure had fun with them. Made me happy that they were getting good out of my toys.

Some videos of there flying. First one was almost a big problem.

Nolans new quad (1 min 37 sec)


Bailys turn.
...Continue Reading
Posted by pjdog350 | Dec 18, 2014 @ 10:54 AM | 1,807 Views
This is my P-51 UMX. I had trouble putting it in the other title below?

PZ P-51 Dawn Partol 2 (3 min 13 sec)
P-51

...Continue Reading
Posted by pjdog350 | Dec 10, 2014 @ 10:28 AM | 1,653 Views
The maiden flight of the E-Flite B-17G with stock battery and 4 grams of unless lead in the nose. Still tail heavy. I was lucky to get her back.

E-Flite B17G maiden flight (2 min 17 sec)


Tried a roll with the B-17?

...Continue Reading
Posted by pjdog350 | Nov 03, 2014 @ 12:18 PM | 2,823 Views
I have a little space left over from a table that I was using to run O-Gauge Lionel & MTH trains. I sold most of that off in favor of getting space to sit my UMX planes on for storage. That way if I want to fly a specific plane I just have to pick it up and do the preflight things. Before I had to get the ladder out and move the cars so I could get the plane I wanted down from hanging off the ceiling. Much easier.

I also provides me with a place to set up a new large RC Fixed wing for flight.

I'm having problems getting my GoPro hero3 sound to work. I can just almost hear it but not really?? I'm working on that!

Man Cave UMX RC Planes (3 min 15 sec)

Posted by pjdog350 | Nov 02, 2014 @ 01:25 AM | 2,460 Views
Been getting colder here in Hudson Florida. We had a cold front come through here the last couple of days which of course brought allot of wind with it. Most my RC fixed wing is UMX stuff from Horizon Hobby. Wind and UMX planes do not get along very well.

I've been waiting for the new E-Flite B-17 UMX. I got two more 250 1S E-Flite batteries to add to my pile of those. Now I have 8. I also got a little thing from I forget who that allows me to use my AC6 Thunder battery charger so that I can charge 4 of these little 1S 250 mha batteries all at once.

Most the time I fly here at home. We have a new home in a development that's only got maybe 30 houses built. There's room for maybe 150 house's so with a little flight management I can fly the little UMX's around and not be any where near any ones home. But I do have a great park just a few blocks from the house to fly. There's one American football field and three soccer fields all side by side. The only problem are the very tall light poles. They are at the ends of the fields so it's real easy to keep away from them.

The B-17 is only 26 inch wing span but I think I keep flying it only at the park. That's where I normally fly the P-38 & Mosquito. Again I could to them here at home but sense they are bigger for safety I do fly them at the park and only very early in the morning. We use to be able to fly at the parks inside basket ball courts but the city planners decided that 3 hours a week of old timers to fly RC was just to much. They needed the facility 24/7 for kids. I guess that the price for being over 55 years of age.
Posted by pjdog350 | Oct 18, 2014 @ 07:27 PM | 2,423 Views
Oct. 18, 2014. Saturday, no wind, very sunny, I started flying my UMX's at 7:30 AM. I had six (6) 150 MHA 1S batteries ready and two (2) 250 MHA 1S batteries ready. First I flew the ASK-21. First flight was short and the motors stopped after a little over 2 minutes. Landing way out in a field. Had a long walk for it.

Next I flew the Spitfire twice. Always a good flier. Then the P-40 twice. Then the MSRX twice.. Put the 250 MHA on charge and 4 150 MHA on charge. When the 250 got ready I flew the ASK-21 again. This flight was almost 10 minutes and my DX6 keeps track of the flight time. Guess a fresh hot battery really makes a difference.

When the four 150 MHA's where ready I got out the Corsair. I can't tell you all what a great flier the Corsair is. Just before the first Corsair flight I replaced the stock wheels with my new standard HK wheels I always put on the UMX WarBirds. The Corsair really looks nice with the new wheel. On the first flight I noticed I was using allot more motor. I was surprised at first then realized that the new wheels are heavier and so with that weight up front that increased the frontal CG. Requires more motor. I didn't think you could make the Corsair fly better but it did. I really like it this way

All in all I had over twenty five flights today with the UMX's. Been here in Sunny Down Town Hudson Florida for over three years and this is the first day I can remember that it's been like this. It has been a great day to be alive if your a UMX pilot and have a garage full of E-Flite, Park Zone & FlyZone UMX model aircraft. Of course you got to have the DX6 and a TTX650 to enhance you models with.

I sure hope tomorrow is the same.
Posted by pjdog350 | Oct 04, 2014 @ 06:13 PM | 3,697 Views
I ordered my E-Flight B-17 today. Really looking forward to this one. Down side is the wife and I bought a new car ( 5.0 Red Mustang) we didn't need. Part of the deal was I would stop spending so much money on RC planes? When HH comes out with a 4 motored bomber?

I may need to move in with one of you guys?

At last. The E-Flite B-17G UMX is on it's way to me. Can't wait for this one.

I don't need another RC plane but I a sick person, very self centered, and I love toys. Currently I have over 20 RC planes and helicopters. Been like this all my life. If I had all the dollars I've spent on toys I'd be a rich man.

I had canceled the B-17G on a moment when I was feeling guilty for all my stuff. But then had a weak moment again and bought another one.

I'll be the only guy in my block to have a B-17G.

Update. 11/28/2-14 At 11:00 my B17G showed up. Delivered by FedX.
Posted by pjdog350 | Jul 10, 2014 @ 12:15 PM | 2,800 Views
Here's a video with my new GoPro Hero 3 of Park Zone UMX P-40, My favorite plane. Not my best, just my favorite.

Park Zone P 40 (6 min 28 sec)


This is a Fly Zone UM P-38. The only Fly Zone plane that I like.

...Continue Reading
Posted by pjdog350 | Jul 04, 2014 @ 02:57 AM | 2,925 Views
I'm so tired of messing with these $ 30.00 cheap camera's. It's always a fight all the time. I got a dice camera from Nitro planes that I thought was going to solve all my video problems and then it stopped working after ten videos because the battery failed?

I went to Best Buy for Go-Pro. They were out plus they didn't have the mount I wanted. I've been to Best Buy many times and they are always out of stock? The sale person said come back at 16:00 we should have some then???? So I thought I'd go on line and buy one. Just wait for the mail to deliver it. First thing I noticed on line is that Wal-Mart has Go-Pros. So we went to the local Wal-Mart in down town Hudson Florida. Wal-Mart is NOT my favorite place. Spooky in there. Some body needs to tell them to turn down the inter-com!

I had to wait a long time for some folks buy groceries in the electronics department. I hate that. These folks think they are special and they don't have to wait in line in the food department. They there food stamp card locked up the register???

But after some flustrating time at Wal-Mart I did get the Go-Pro. Now I have to learn how to use it and wait for the head mount gear to get hear in the mail and I'm in business.

Jack
Posted by pjdog350 | Jul 02, 2014 @ 08:54 AM | 3,178 Views
I've tried to fly my Park Zone Spitfire UMX several times. Twice I crashed into the field next to my home. The first time I stuck it in a tree around the retention pond behind the house. Like to never got it out of the tree. But did. I decided that the problem was not the plane but me. So I got a Park Zone Champ. Was able to fly it and have been flying it for 6 months. I first started fly RC in 1972 but I was using Mode 1. All the RC Helicopters and ready to fly Park Zone and Fly zone are all mode 2. So I had to learn to switch to mode 2 which is not an easy task. The Champ got my head screwed on right and now I think I'm a mode 2 flier.

After the champ I did a T-28, then a P-51, then a F4U, then the Spitfire. I've got to say the Spitfire is the best of them all so far. It's so gentle to fly. I've had the same problems with the Park Zone P-40. Crashed three times trying to do a maiden flight before I got use to mode 2. I also put the P-40 up today for a real flight (maiden again) as I'm thinking I'm on a roll and should stay after it while all is going well. The P-40 sucks. Enough said about him.

Back to the Spitfire. I really love it. BUT - upon landing I was trying to stay away from all those neighbors who had gathered to watch. In doing that I did the worse landing I've ever had and pulled off the right landing gear. Not a problem as I have already used a little foam safe glue and up it back on. The locals that were watching were spread all over the place. So I had...Continue Reading
Posted by pjdog350 | Jun 27, 2014 @ 01:53 PM | 3,229 Views
Today the FedX man brought me a new Park Zone (PZ) war bird. I love these Park Zone war birds. They fly great. Last a long time as they are so light. Also look real good. The P-40 is my favorite however it's by far not the best flier. The T-28 seems to be the best flier for me. After watching the video from Horizon Hobby (HH) I'm thinking that maybe the Corsair my surpass the T-28 in ease of flying. It appears to slow up very well and is very restant to tip stall.

Going to do the maiden flight in the morning real early. Maybe 6:30 am. Going to also have the video camera on to record the result. Nothing the a video to tell the truth about what happened.
Posted by pjdog350 | Jun 17, 2014 @ 02:34 PM | 3,971 Views
I bought a new Spektrum DX6 transmitter today. I have two DX6I's. I love them
but they only hold 10 models. The DX6 holds 250 models. I'm real sure I'll not exceed that! My wife just assured me I'd be under 250 models.

Currently reading the manual. It's very thick!

Jack
Posted by pjdog350 | May 29, 2014 @ 08:27 AM | 4,861 Views
Today I put the HK 10400 wheels on my ParkZone P-40, P-51 & Spitfire. I had already done that to the Mosquito and the FlyZone P-38.
Posted by pjdog350 | May 27, 2014 @ 01:10 PM | 3,107 Views
Josef Rejent made a little gnome motor for a project build I'm working on. An E-Flite 250 slow flier Nieuport 17. They give you a little thin plastic motor to attach to your small 250 electric out runner motor. My first little plastic dummy motor blew up on the first run up. So I did a better job with the second little plastic motor. But it to blew up. So I wrote off having any thing in there that looked like a motor. The while surfing the RCGroups forum I came across this man in the Czech Republic that make his own scale motors for his own builds. I contacted him to see if he'd be interested in a build for me. He responded that he did do that sort of thing so I asked for a very small Gnome motor. he worked up a plan and 3D drawings and we agreed on the work. A few weeks later here it is and I'm very, very happy with it.

He's done little spark plugs, rocker arms, plug wires, nuts, bolts. When you look at it you'd think it will run. I'm very pleased with it. Josef even made a little wooden box to ship it from Europe to the USA.

Check this out:

I've got to have more.

I've added another small Nieuport motor to my fleet. This one is a La Rhome 9J. Lots of good scale detail. Another Josef build!

My second E-Flite Nieuport is almost finished. This 9J will go on it. I think I'll also add aileron servos to it today. The stock E-Flite 250 Nieuport is a three (3) channel plane.