SMALL - SMALL - Telemetry SMALL - Radio
Dreamcatcher's blog
Posted by Dreamcatcher | Mar 01, 2015 @ 09:15 AM | 2,037 Views
Yesterday afternoon i successful maidened the little Me-109E4 PSS and she scored her first one shot 30 minutes of flying !

Me 109Epss hd1080p (6 min 59 sec)

Posted by Dreamcatcher | Feb 25, 2015 @ 10:30 AM | 2,379 Views
My little self designed Me-109 E PSS glider is finished and waits for the spring time south breezes to be maidened at the slope

I did my best to try to reproduce the Me-109 E4 flown by the Gruppenkomander Hans VON HAHN from the I/JG3 during WWII.

Posted by Dreamcatcher | Dec 04, 2014 @ 10:08 AM | 1,936 Views
There was too much time that this kit was in my stash...

The box is now opened and the build started slowly.

There is a lot of vaccuum formed parts in this Kit that are not so easy to assemble.

The wing : Here again, the quality is not as good as it should be.
-Once the correct dihedral is set, there is a lack of foam (about 1.5 to 2mm) on the extrados of the wing .
-The location of the two ailerons control rods are also not identical. I had to cut the one that was in left wing and to correct the systems both in height and in length.

I'm a bit disgusted by a so poor quality... i think i will pause this build and back on it later.
Posted by Dreamcatcher | Nov 12, 2014 @ 05:29 AM | 4,163 Views
i just finished to draw the CAD plan of an Extra 300 / Mx designed by Arm1s.

This plane is very great looking and also fly VERY well.

You can find the plan download links here and also some very nice video of this plane performing 3D flights :

Drawing this plan allowed me to get mee more familiar with the new improvements of the Turbocad designer 21 software i bought a couple of monthes ago to replace my hold Turbocad LE version that was not Windows 7 / 8 capable.

Thanks a lot to Arm1s for the pictures and axplanation that allowed me to draw the plan.

I hope you will enjoy to build this nice plane !
Posted by Dreamcatcher | Sep 26, 2014 @ 03:31 AM | 2,349 Views
I fitted my little F16 PSS glider with new servos to improve the roll rate.

The test flights have been successful

f16 PSS 2 (2 min 58 sec)

Posted by Dreamcatcher | Aug 20, 2014 @ 10:32 AM | 2,911 Views
After 3 monthes of work my plastic model kit of the Spitfire Mk.XVI is finished :
Revell Spitfire Mk XVI (7 min 4 sec)

I hope to be able tomanage the same paint job on my foamy R/C Mk.XVI
Posted by Dreamcatcher | Aug 18, 2014 @ 06:03 AM | 3,416 Views
Hi !

i uploaded a video made from the rushes of the maiden + 3 other flights .

(Sorry, the cam was just stuck with velcro on my hat... )

F16 PSS (4 min 24 sec)

Enjoy !
Posted by Dreamcatcher | Aug 05, 2014 @ 05:44 AM | 3,428 Views
Hi friends,

Yesterday a small parcel have been delivered at home.
Inside was the new lovely little Jet EPO Chuck Gliders from Hobby King called X16, X18 and X22.

Ofcourse, you all guessed we are speaking about reproductions of a F16 "Fighting falcon" , a F18 "Hornet" and a F22 "Raptor".

The time needed to build them is under the minute per plane. You just have to insert the rudder fins in the and the price is under $5 each (that's why I could not resit to add them on my last order!)

Span : 295mm
Lenght : 400 mm
Weight (as chunck) : 31 grammes

I bought them as a gift for my young nephews because i was thinking they could be some great toys to fly in the back yard or at the beach.

My Flight tests : These little Fighters are just.... Stunning !

At the first (gentle) thrown, they all glided, straight and up to 15 meters
The fitted molded rubber nose cones are also really great to absorb the shock in case of stall landing.

I'm sure that these three little chuck gliders can be converted as micro PSS and
as i have some under 3gr servos, a nano Rx and some 1S lipo available in my stash...
I think i will re-order a X16, X18 and X22 to try to convert them as micro R/C slope gliders very soon !

Stay tuned
Posted by Dreamcatcher | Apr 10, 2014 @ 01:28 PM | 3,947 Views
I finished my small Messerschmitt Bf-109 F2 plastic model kit

Revell Me 109F2 En (5 min 11 sec)

I will be able to try to paint the R/C model now...
Posted by Dreamcatcher | Mar 10, 2014 @ 07:18 AM | 4,191 Views
I found this chart many times ago on the Web.

I don't remind where (may be here on Rc Groups) and i don't know who made it but i think thsi chart is a "must have" so i share it here.
Posted by Dreamcatcher | Sep 29, 2013 @ 03:10 PM | 5,119 Views
The Me-109 is one of my favorite WWII Fighter.
I want to try to build a plane with a hot wire cut fuselage since many time now.
Early september, i decided to spend a bunch of hours on my CAD software for designing a small "Emil" (a Me-109 model E)

I will give a try with a P.S.S. glider version...

As this week end was stormy and rainy, i started to cut the templates.

A new adventure begins

: I finally opened a thread in the PSS / SLOPE gliders section of RcGroups.
It will be easier to manage than the blog.
Posted by Dreamcatcher | Aug 22, 2013 @ 09:21 AM | 4,695 Views
Hi !

I've been in South Western France - at the "Dune du Pyla" - some days ago with some gliders and my HD wing cam....

Soaring from a sand dune facing the Ocean is a real pleasure !
Posted by Dreamcatcher | Jul 14, 2013 @ 06:01 AM | 4,789 Views
This is a little video i made with the rushes i caught since the start of the soaring season with my Rc club Buddies. I use a HobbyKing HD wing cam.

Planeur 2013 (3 min 51 sec)

Small Ridge, not very efficient but soaring here always give us a lot of fun

Enjoy !
Posted by Dreamcatcher | Jun 05, 2013 @ 07:37 AM | 5,581 Views
Hi !

I always be interested in small R/C gliders and planes so, when i saw this little Ask-21.... i couldn't resist !

Specs :
Span. : 86 cm
Lenght : 43 cm (Gosh ! it's very small !!! )
AUW : 87 grammes

4 channels : Elev. ; Ailerons ; rudder ; Towing system

This micro glider is a great looking semi-scale machine.
I've chosen the DSM2/DSMx Bind and Fly version :
The binding with the DSM2 module of my JR PCM 9XII was very easy.
Just have to pug the 1S lipo battery in the glider and start the classic binding procedure on my transmitter. It takes only a few seconds to be ready to take off !

The wing is removable from the fuselage : 4 little screws are used to fix the wing on the fuselage.

More or less, all the control surfaces parts seems to be correctly set from factory. If one of them need to be fine adjusted, you can do it by bending the "u" that is made on each push rods.

I will maiden her on the slope this afternoon after work, if the weather still be...Continue Reading
Posted by Dreamcatcher | May 23, 2013 @ 09:45 AM | 5,442 Views
Each summer time, i see some big birds painted yellow,red and black.
They fly over the county to survey the forest and fight any fire start they spot in the forests.

These birds are the famous Canadian water bombers Canadair CL-415.

Since many years an idea haunts my thoughts : These big birds are certainly "a bit" draggy but they have big wings, a tall rudder and their are fitted with a pretty big sized stabilizer so....

Since many years i thought It could be funny to try to reproduce a Canadair CL-415 as a glider / PSS model

I fed up to wonder how it could fly so.... I started to draw my own plan

I will use depron to build it and i still don't know if i will use an real airfoil for the wing or simply a KFm airfoil.

Building scheduled for this winter

To be continued...
Posted by Dreamcatcher | May 17, 2013 @ 05:51 AM | 8,117 Views
Santa brought me a very nice present the last time we met :
A beautiful MX-2 with a nice blue, green and white paint scheme !

She's 1.40m span and electric powered.

During all the winter season I had no time to work on it but finaly i found some free time to spend on my present during the last weeks.

At first glance, the plane looks very sexy and well finished but when looking closer, no doubt, it's a Chineese designed Aircraft and, in my opinion, It is necessary to bring some modifications if we want to avoid unpleasant surprises.

* Hinges problem :
All the hinges are fitted with a plastic axis => DANGEROUS on such a big plane so i replaced them by Hinges fitted with a metallic axis.

* Elevator problem :
The mobile part of the elevator is molded in one part, 100% foam.
Nice, but this part is to soft : the area that link the two elevators and host the control horn can be twisted and i think it can even break while airborne if pulling "high G" - and that's the purpose of that plane, so...

I dug in the front side of the part and inserted a 3mm plywood reinforcement + epoxy. Now, the part is much more stiffer.

* Elevator pushrod problem :
The elevator link is able to be bent easily if we hold the moving part of the elevator.... not good at all, once airborne !

I used Epoxy to glue the tubular guide of the elevator pushrod on the output windows at the rear of the fuselage and i built a 2mm plywood reinforcement that hold the tubular guide at the...Continue Reading