HobbyKing.com New Products Flash Sale
pjdog350's blog
Posted by pjdog350 | Dec 10, 2014 @ 11:28 AM | 829 Views
The maiden flight of the E-Flite B-17G with stock battery and 4 grams of unless lead in the nose. Still tail heavy. I was lucky to get her back.

E-Flite B17G maiden flight (2 min 17 sec)

Had a good flight today, great landing. See below.
...Continue Reading
Posted by pjdog350 | Nov 03, 2014 @ 01:18 PM | 2,080 Views
I have a little space left over from a table that I was using to run O-Gauge Lionel & MTH trains. I sold most of that off in favor of getting space to sit my UMX planes on for storage. That way if I want to fly a specific plane I just have to pick it up and do the preflight things. Before I had to get the ladder out and move the cars so I could get the plane I wanted down from hanging off the ceiling. Much easier.

I also provides me with a place to set up a new large RC Fixed wing for flight.

I'm having problems getting my GoPro hero3 sound to work. I can just almost hear it but not really?? I'm working on that!

Man Cave UMX RC Planes (3 min 15 sec)

Posted by pjdog350 | Nov 02, 2014 @ 01:25 AM | 1,709 Views
Been getting colder here in Hudson Florida. We had a cold front come through here the last couple of days which of course brought allot of wind with it. Most my RC fixed wing is UMX stuff from Horizon Hobby. Wind and UMX planes do not get along very well.

I've been waiting for the new E-Flite B-17 UMX. I got two more 250 1S E-Flite batteries to add to my pile of those. Now I have 8. I also got a little thing from I forget who that allows me to use my AC6 Thunder battery charger so that I can charge 4 of these little 1S 250 mha batteries all at once.

Most the time I fly here at home. We have a new home in a development that's only got maybe 30 houses built. There's room for maybe 150 house's so with a little flight management I can fly the little UMX's around and not be any where near any ones home. But I do have a great park just a few blocks from the house to fly. There's one American football field and three soccer fields all side by side. The only problem are the very tall light poles. They are at the ends of the fields so it's real easy to keep away from them.

The B-17 is only 26 inch wing span but I think I keep flying it only at the park. That's where I normally fly the P-38 & Mosquito. Again I could to them here at home but sense they are bigger for safety I do fly them at the park and only very early in the morning. We use to be able to fly at the parks inside basket ball courts but the city planners decided that 3 hours a week of old timers to fly RC was just to much. They needed the facility 24/7 for kids. I guess that the price for being over 55 years of age.
Posted by pjdog350 | Oct 18, 2014 @ 08:27 PM | 1,723 Views
Oct. 18, 2014. Saturday, no wind, very sunny, I started flying my UMX's at 7:30 AM. I had six (6) 150 MHA 1S batteries ready and two (2) 250 MHA 1S batteries ready. First I flew the ASK-21. First flight was short and the motors stopped after a little over 2 minutes. Landing way out in a field. Had a long walk for it.

Next I flew the Spitfire twice. Always a good flier. Then the P-40 twice. Then the MSRX twice.. Put the 250 MHA on charge and 4 150 MHA on charge. When the 250 got ready I flew the ASK-21 again. This flight was almost 10 minutes and my DX6 keeps track of the flight time. Guess a fresh hot battery really makes a difference.

When the four 150 MHA's where ready I got out the Corsair. I can't tell you all what a great flier the Corsair is. Just before the first Corsair flight I replaced the stock wheels with my new standard HK wheels I always put on the UMX WarBirds. The Corsair really looks nice with the new wheel. On the first flight I noticed I was using allot more motor. I was surprised at first then realized that the new wheels are heavier and so with that weight up front that increased the frontal CG. Requires more motor. I didn't think you could make the Corsair fly better but it did. I really like it this way

All in all I had over twenty five flights today with the UMX's. Been here in Sunny Down Town Hudson Florida for over three years and this is the first day I can remember that it's been like this. It has been a great day to be alive if your a UMX pilot and have a garage full of E-Flite, Park Zone & FlyZone UMX model aircraft. Of course you got to have the DX6 and a TTX650 to enhance you models with.

I sure hope tomorrow is the same.
Posted by pjdog350 | Oct 04, 2014 @ 07:13 PM | 2,534 Views
I ordered my E-Flight B-17 today. Really looking forward to this one. Down side is the wife and I bought a new car ( 5.0 Red Mustang) we didn't need. Part of the deal was I would stop spending so much money on RC planes? When HH comes out with a 4 motored bomber?

I may need to move in with one of you guys?

At last. The E-Flite B-17G UMX is on it's way to me. Can't wait for this one.

I don't need another RC plane but I a sick person, very self centered, and I love toys. Currently I have over 20 RC planes and helicopters. Been like this all my life. If I had all the dollars I've spent on toys I'd be a rich man.

I had canceled the B-17G on a moment when I was feeling guilty for all my stuff. But then had a weak moment again and bought another one.

I'll be the only guy in my block to have a B-17G.

Update. 11/28/2-14 At 11:00 my B17G showed up. Delivered by FedX.
Posted by pjdog350 | Jul 10, 2014 @ 01:15 PM | 2,137 Views
Here's a video with my new GoPro Hero 3 of Park Zone UMX P-40, My favorite plane. Not my best, just my favorite.

Park Zone P 40 (6 min 28 sec)

This is a Fly Zone UM P-38. The only Fly Zone plane that I like.

...Continue Reading
Posted by pjdog350 | Jul 04, 2014 @ 03:57 AM | 2,232 Views
I'm so tired of messing with these $ 30.00 cheap camera's. It's always a fight all the time. I got a dice camera from Nitro planes that I thought was going to solve all my video problems and then it stopped working after ten videos because the battery failed?

I went to Best Buy for Go-Pro. They were out plus they didn't have the mount I wanted. I've been to Best Buy many times and they are always out of stock? The sale person said come back at 16:00 we should have some then???? So I thought I'd go on line and buy one. Just wait for the mail to deliver it. First thing I noticed on line is that Wal-Mart has Go-Pros. So we went to the local Wal-Mart in down town Hudson Florida. Wal-Mart is NOT my favorite place. Spooky in there. Some body needs to tell them to turn down the inter-com!

I had to wait a long time for some folks buy groceries in the electronics department. I hate that. These folks think they are special and they don't have to wait in line in the food department. They there food stamp card locked up the register???

But after some flustrating time at Wal-Mart I did get the Go-Pro. Now I have to learn how to use it and wait for the head mount gear to get hear in the mail and I'm in business.

Posted by pjdog350 | Jul 02, 2014 @ 09:54 AM | 2,475 Views
I've tried to fly my Park Zone Spitfire UMX several times. Twice I crashed into the field next to my home. The first time I stuck it in a tree around the retention pond behind the house. Like to never got it out of the tree. But did. I decided that the problem was not the plane but me. So I got a Park Zone Champ. Was able to fly it and have been flying it for 6 months. I first started fly RC in 1972 but I was using Mode 1. All the RC Helicopters and ready to fly Park Zone and Fly zone are all mode 2. So I had to learn to switch to mode 2 which is not an easy task. The Champ got my head screwed on right and now I think I'm a mode 2 flier.

After the champ I did a T-28, then a P-51, then a F4U, then the Spitfire. I've got to say the Spitfire is the best of them all so far. It's so gentle to fly. I've had the same problems with the Park Zone P-40. Crashed three times trying to do a maiden flight before I got use to mode 2. I also put the P-40 up today for a real flight (maiden again) as I'm thinking I'm on a roll and should stay after it while all is going well. The P-40 sucks. Enough said about him.

Back to the Spitfire. I really love it. BUT - upon landing I was trying to stay away from all those neighbors who had gathered to watch. In doing that I did the worse landing I've ever had and pulled off the right landing gear. Not a problem as I have already used a little foam safe glue and up it back on. The locals that were watching were spread all over the place. So I had...Continue Reading
Posted by pjdog350 | Jun 27, 2014 @ 02:53 PM | 2,487 Views
Today the FedX man brought me a new Park Zone (PZ) war bird. I love these Park Zone war birds. They fly great. Last a long time as they are so light. Also look real good. The P-40 is my favorite however it's by far not the best flier. The T-28 seems to be the best flier for me. After watching the video from Horizon Hobby (HH) I'm thinking that maybe the Corsair my surpass the T-28 in ease of flying. It appears to slow up very well and is very restant to tip stall.

Going to do the maiden flight in the morning real early. Maybe 6:30 am. Going to also have the video camera on to record the result. Nothing the a video to tell the truth about what happened.
Posted by pjdog350 | Jun 17, 2014 @ 03:34 PM | 3,184 Views
I bought a new Spektrum DX6 transmitter today. I have two DX6I's. I love them
but they only hold 10 models. The DX6 holds 250 models. I'm real sure I'll not exceed that! My wife just assured me I'd be under 250 models.

Currently reading the manual. It's very thick!

Posted by pjdog350 | May 29, 2014 @ 09:27 AM | 4,166 Views
Today I put the HK 10400 wheels on my ParkZone P-40, P-51 & Spitfire. I had already done that to the Mosquito and the FlyZone P-38.
Posted by pjdog350 | May 27, 2014 @ 02:10 PM | 2,452 Views
Josef Rejent made a little gnome motor for a project build I'm working on. An E-Flite 250 slow flier Nieuport 17. They give you a little thin plastic motor to attach to your small 250 electric out runner motor. My first little plastic dummy motor blew up on the first run up. So I did a better job with the second little plastic motor. But it to blew up. So I wrote off having any thing in there that looked like a motor. The while surfing the RCGroups forum I came across this man in the Czech Republic that make his own scale motors for his own builds. I contacted him to see if he'd be interested in a build for me. He responded that he did do that sort of thing so I asked for a very small Gnome motor. he worked up a plan and 3D drawings and we agreed on the work. A few weeks later here it is and I'm very, very happy with it.

He's done little spark plugs, rocker arms, plug wires, nuts, bolts. When you look at it you'd think it will run. I'm very pleased with it. Josef even made a little wooden box to ship it from Europe to the USA.

Check this out:

I've got to have more.

I've added another small Nieuport motor to my fleet. This one is a La Rhome 9J. Lots of good scale detail. Another Josef build!

My second E-Flite Nieuport is almost finished. This 9J will go on it. I think I'll also add aileron servos to it today. The stock E-Flite 250 Nieuport is a three (3) channel plane.
Posted by pjdog350 | May 22, 2014 @ 03:12 PM | 3,175 Views
Today (05/21/2014) my order for the Ultra Micro war bird (PZ) wheels showed up. I could not remember which size I had order many years ago. So like many years ago I order a bunch. Now I'll get more. The correct wheels are marked 10400 OR006-00801. I also got some 10401 and large K. These are pretty big for UM's but I'm sure I'll find a use for them. Maybe on the Champ. Everybody likes to put big tires on champs.

The 10400 measured 30.46 MM. (1.2 inches)
The 10401 measured 36.00 MM (1.4 inches)
The 9837 are 47.85MM (1.8 inches)



I painted the wheel aluminum. Then put a set on the PZ T-28 & PZ Champ.
Posted by pjdog350 | May 03, 2014 @ 10:18 AM | 2,949 Views
I really like this little UM planes. Especially the Park Zone ones. The Park Zone ones seem to have more quality but that's just my opinion. They are much quieter!!

Anyway I'm missing the P-51 and the P-38. Also the ASK-21. They where in a place where I could not reach them. They are hanging from the ceiling in my man cave. It's been raining here (Florida, USA) for three days and I didn't want to get my F-150 Ford wet. It's real clean and It's hard to wash & dry. I'm not complaining about the rain. We live in Florida and water here is always welcome. Expensive too! My water bill is about $ 200.00 a month.

P-38 is in the mail with a TT650 TX which I understand is a good one?

I fly with Spektrum DX6I's I have two. I was using the ANYLINK for the FlyZone planes. It works real well but I don't like the plug it in, then unplug. It's a pain in the butt to use. I got a TT404 but I keep seeing allot of guys are having range problems with the cheap little radio. I guess if you keep your plane real tight to you you'll be OK but I don't want that worry. I'm hard pressed just to take off, fly around, then land in a controlled fashion so I bought the TT650. It's in the mail now? If it's half a good as the DX6I I'll be happy.

Horizon hobby keeps saying they are coming out with a DX6 that has a 250 model memory. That's what I want. It's at the top of my bucket list. Then I go on a campaign to fill it up.

I'm thinking of building a UM B-36. Working up the specifications...Continue Reading
Posted by pjdog350 | May 02, 2014 @ 03:28 PM | 3,240 Views
Today (05/02/2014) the Fedex man brought my second Nieuport 17 from Horizon Hobby. The shipping box was in excellent shape however when I got the Nieuport out of the shipping box I saw some heavy handed damage to the original box. I was real concerned. I open up the box and removed all the parts. Almost everything is good. However there is some slight wrinkling in the top wing in two places. That kinda sucks as when you buy something you expect it to arrive at you home in perfect shape. I paid for a perfect one that's what I should have received.

The real down side is that Horizon Hobby knew this box had been damaged before they put it in the shipping box. It was packed real well in the shipping box.

I have another set of wings I got from Horizon Hobby when my first Nieuport 17 had a wing alinement problem. It caused a top wing warp? I ask that Horizon replace the wings and they did no questions ask. I really hate to complain again. So I'm going to man up and live with it. Still going to save the spare set of wings for the first crash rebuild.

I love these Nieuport 17 slow fliers. I hope HH does not discontinue the Nieuport 17's like the did the Fokker D-7.

Starting the assembly of the Nieuport today (05/10/2014). Went to the LHS and got some new servos that do not require and mods the the servo box. They are Futaba S3107's. They just fit in there. Also made a place for the ESC to fit to the side of the firewall.

This sure is a nice looking RC plane.

Update:...Continue Reading
Posted by pjdog350 | Apr 19, 2014 @ 03:32 PM | 2,903 Views
Today the postman brought me four (4) new AR6100E receivers from Target hobby. I order them about a month ago. Normally they get here in two weeks. I was getting concerned. A few days ago I looked up my account on there site to be sure I ordered and paid for them. I did.

These receivers are only about 4 or 5 dollars.

Now I need for more PNP Rc planes to use them in. I'm thinking one of these.

Also another E-Flite Nieuport 17 250.

UPDATE - 4/30/2014

I ordered another E-Flite Nieuport 17 250 yesterday. It's already on it way. I have the motor, receiver and ESC in my parts box. I've got several HobbyKing 12A ESC's, Also have 4 HobbyKing T2211-2300 motors which are almost the same as the motor offered by E-Flite for this plane and I have the receivers. So I'm good to go. The last times I assemblied this sweet plane I found that the Hi-Tec servos I bought for it where a little to tall as they hit the carbon fiber tube that the motor attached to. I had to mod the servo to be raised up. that caused me to attach the push rods to the bottom of the servo arm. That caused travel problems. So this time I'm going to install the motor. Then take the fuselage to the LHS and get a servo that will fit. Plus have good gear straingh. I will NOT be using the E-Flite servos that come with a B400 RC Helicopter. Those little babys caused be allot for trouble. The gears are real weak. Cost me lots of money in B400 repairs.

I also bought a FlyZone P-38. Spending the Tax return cash. Well my allotment of it. Most goes to the house for the wifes wants. She real fare about money. I can't complain.
Posted by pjdog350 | Apr 08, 2014 @ 12:13 PM | 3,548 Views
Following all the postings on the UM RC Models I have found allot of thoughts on the brushed motors in the UM line of planes. They are pager motors so we should not really expect that much. However some folks think there pager motored RC planes are prefect and will last forever. Not so.

I took my new - never - flown and never run PZ UM Mosquito and used my Tower Hobbies digital Mini-Tach to see what the RPM's where on this model. It does seem to be off almost 100 RPM almost all the time. If I remember right the left (Port) motor is a little stronger than the right motor?

I also found that one of the main wheels on the Mosquito was way out of round. I had ordered a couple dozen wheel three years ago while I was doing UM scratch builds. I just happened to have a set that were the correct size. The hubs were white which I thought was stupid looking for a War Bird so I painted them alumunim and then put the faon rubber tire back on..

attached are some short videos of the process.

Bad stock wheel on PZ Mosquito (0 min 59 sec)

https://www.youtube.com/watch?v=kirFUaIFsJs[/url]...Continue Reading
Posted by pjdog350 | Mar 31, 2014 @ 11:13 AM | 2,728 Views
I had some motor problems with the FZ Nieuport 17. I hated it as I really like the Nieuports allot. But I returned the Nieuport to the LHS (B&B Hobbies) here in Hudson Florida. She said they had another one coming in Thursday. I thought that would be fine but then saw the PZ T-28. I asked if I could swap it out for the T-28. She accepted and I went homw with that.

Charging batteries as I write this.

I finally got to fly the new UM PZ T-28. Great little plane.

I had the ailerons backwards. Checked it several times and still had it backwards for it's first flight? It rolled over and went straight in with full motor? But it was OK. Sitting there in the sand on it's wheels. Got lots of sand in the gears but was able to get most out. I have had four (4) flights sense. All good ones.

I had asked on RCGroups if it need any nose weight. All said no but she seemed tail heavy so I put a smidgen in anyway. Well - that made it nose heavy and I had to remove it for the third flight. Now - with the landing gear on and the battery as far forward as I can get it she flies great. What a sweet plane.

My Camera is one I bought to carry on the planes and Helicopters for videos. I currently have it under the bill of my baseball cap. Seems I never have the camera pointing where I want it. I'm either over the plane or under it.

Sorry that your seeing nothing most the time but I have a great crash landing at the end that you can see. Again - T-28 is OK.

Got a real video this time.

April 11, 2014 at &:30 AM I hit the Light pole in front of my house on the street with the T-28. Wrinkled the nose a little more!
Posted by pjdog350 | Mar 28, 2014 @ 11:46 AM | 3,324 Views
Yesterday while at the LHS getting some foam safe glue for some modifications to my Champ I saw a FlyZone Nieuport 17. I really don't like the gear sound from FlyZone planes but I like the looks of the Nieuport so I bought it. After removing it from the box the first thing I saw was allot of right motor thrust? I seemed to me to be way to much? It's got allot more right motor thrust that the DR-1 I have from Flyzone?

Anyway I sent a email to Hobbico asking if this is correct. Of course I included pictures!

Well bad news. I decided to try the FZ Nieuport 17 this morning. It had no power at all. I like to try my new planes running down the street first, I've just never been a fan of hand launches. When I wnet to run in down the street it had almost no power at all. It was really a dud. I was really disappointed. I love Nieuports & Biplanes. I made a movie. It's real poor as most the time the plane is below the picture. That's because the camera is mounted on my baseball cap. I have to raise the cal way up or when the planes are flying they are above the picture?

But at the end you can see what the plane has no power? Can't get out of it's own way.

FlyZone Nieuport 17 maiden DUD (4 min 26 sec)

I returned the plane to the folks I bought it from. B&B hobbies on highway 19 here in Down Town Hudson Florida. She said she had another one coming in Thursday and she'd trade me out. Which was fine with me. But I saw a ParkZone (PZ) T-28 and everyone that has one say they are great fliers. I like to fly here at home so I asked if a swap for the T-28 would be OK. She said it would be fine. They were the same price. So Now I'm the owner of a T-28.
Posted by pjdog350 | Mar 26, 2014 @ 08:23 AM | 2,788 Views
Yesterday the Fedx man brought me 4 new Champ wings. Looking forward to putting magnets in the wings to hold them on the fuselage. Doing trim art on the wings. Making a clip wing to see if it really flies better in the wind. And lastly - make a extended wing for gliding. Maybe even carry my new little bitty China camera up over the neighborhood to see if I can see the gulf from my house. It's 4.6 miles to the west?

Pictures and movies to follow?

First to the local hobby shop (LHS) for trim items.

Also I want another E-Flite Nieuport 17 250 slow flier.

Today is March 28th. I have four wings to modify and yesterday I got several different kinds of foam safe glue. So I'm off to the man cave for some wing modifications for the Champ.

First set of wings I tried to clip didn't turn on well I don't think. I think my foam glue is to thick? The LHS only had two foam friendly glues in stock. I bought both but I'm not happy. I watched Gabe do his and it looks like his glue is thinner?