New Products Flash Sale
dteel's blog View Details
Posted by dteel | May 03, 2015 @ 02:36 PM | 3,288 Views
Today I began the assembly of the ZMR 250 Kit that I purchased from Banggood on April 6th 2015 and received on April 27th 2015.


H250 ZMR250 250mm Carbon Fiber Kit

DYS BE1806 2300KV Brushless Motor Black Edition

Emax Simonk Series 12A ESC

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

I was in no hurry to get started as I had several components on order that had yet to arrive. Most of the components have arrived so I decided to go ahead and get started.

I started by putting the prop mounts on the motors.

Propeller Mount (Φ5mm / CW / H1806)
Propeller Mount (Φ5mm / CCW / H1806 / Silver Bullet)

Next I put the motors on the arms.

I looked at the ESCs that I purchased but I want to put them inside the body of the quad if possible, so I set them back aside for now.

Next I mounted the standoffs using thread lock.

I chose the front by marking the top of the posts with a permanent marker.

Next I mounted the arms on the frame.

It compares very closely to the Tarot 250 that I bought and built earlier, build log here.
Posted by dteel | Mar 28, 2015 @ 06:21 PM | 4,359 Views
I've never built a quad from scratch. I have three quads, a Hubsan X4, a WL Toys, V959 and V262. I have a Mobius and home build anti-vibration mount. I have on the other hand built two 450 sized helicopters so I hope that experience has helped prepare me for this endeavor.

So here is what I used to build this quad.

TAROT Mini 250 Carbon Metal Quad copter main frame Kit Built-in PCB board TL250A. $32.99

To power it, I bought Emax Mt1806 2280kv Brushless Motor (Pack of 4 CW/CCW match set ). $54.98

I bought these Hobbypower Simonk 12A Brushless Speed Controller ESC (pack of 4 pcs) $35.98

Gemfan 5x3 5030 3-Leaf Propeller Black and Orange get the job of providing lift. $14.36 (3 sets each)

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport gets the job of keeping this thing stable. Goodness knows the pilot isn't capable. $14.99

SMD 5050 Blue Waterproof LED Flexible Flash Strip add a bit of flash and good for night flying visibility. $12.98 this is the total for 16.4 ft. of this adhesive backed waterproof LED strip of which I used 6" of each color. A pro rated amount for what I used is about $0.40

SMD 5050 Red Waterproof LED Flexible Flash Strip add a bit of flash and good for night flying visibility. A pro rated amount for what I used is about $0.40

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite provides the channel outputs to the flight controller. $14.99

The grand total not including such extras as needed to...Continue Reading
Posted by dteel | Mar 25, 2015 @ 11:20 AM | 3,899 Views
Tarot 450 PRO V2 FBL Flybarless RC Helicopter KIT
Banggood (Link to product)
SKU: SKU104672
Purchased: 03/02/2015
Received: 03/24/2015

Hobbyking YEP 40A (2~6S) SBEC Brushless Speed Controller

NTM Rotor Drive 450 Series 3400KV / 500W from Hobby King

EMAX ES09MD Digital Swash Servo, yes I'm using these for swash servos.

KST DS215MG Metal Miniature Digital Servo, I'm using this light, strong and fast servo for my tail servo.

VBar 5.3.4pro Big KBAR K8 Flybarless 3 Axis Gyro System. I used the Mini K-Bar on my Forza 450 build but decided to go with the Gold K-Bar for this build so I could enable the governor if I desired.

Turnigy 2200mAh 3S 30C Lipo Pack

It was sent via registered mail so required a trip to post office to prove I'm me and then they let me have my package.

I'll add more pictures as I go along and detail the steps as I accomplish them.
Posted by dteel | Feb 28, 2015 @ 08:01 PM | 4,946 Views
On 01/14/2015 I purchased the JR Forza 450 3D Kit w/Motor. It left quit a bit for me to buy and set up but I wanted to build a 450 sized helicopter from a kit and this fit the bill.

Here is the list of build components

JR Forza 450 3D Kit w/Motor $149.99
KST DS215MG Metal Miniature Digital Servo X 4 $106.96
YEP 40A (2~6S) SBEC Brushless Speed Controller 5A BEC $20.95
YEP ESC Programming $13.63
Lemon Rx DSMX Satellite LM0008 X 2 $17.60
VBar 5.3.4pro Big KBAR K8 Flybarless 3 Axis Gyro System $37.99

So I'm going to document the build as I go along. I started today 2/28/2015 about 6 weeks after purchasing the kit. The delay was mostly due to the slow delivery of the KST servos that I ordered from Banggood. I got a pretty good price but between the port shut down at San Pedro and the Chinese new year, it took well over a month to receive the servos.

I didn't get a picture of the parts out of the box. Sorry about that. I'll try to do better on my next build tread.
Posted by dteel | Jul 30, 2014 @ 08:25 PM | 3,552 Views
I have looked and looked but cannot find a set of ball link pliers that I can use on my micro helicopters. The problem came to a head when I was trying to pry the servo link off of the swash plate on my HiSky HFP100 and I snapped off a ball. Man those balls are little (2mm). I donít think it was a problem with the swash, I donít blame it for breaking, it took an incredible amount of force to get these ball links to pop off. I believe the links are bad way too tight on the ball. That would help to explain my poor experience with flying this particular heli too.

So I took matters into my own hands and had an idea. I have a pair of tweezers that had an alignment pin. I was thinking that with a little modification I could turn them into a tool that will work. Knowing better than to risk my wifeís ire I searched for a pair I could buy online that wasnít too expensive. I found a pair at Amazon that would work just fine the Aven 18403 for $5.04.

The rest is told in the pictures....Continue Reading
Posted by dteel | Apr 17, 2014 @ 04:10 PM | 3,400 Views
Thought that I would track my thoughts as I progress in my journey. Started flying RC helicopters in December 2013.

My first helicopter was the MJX T-23, I donít remember the purchase date. I flew this helicopter around my back yard until I destroyed the flight blades and smoked one of the two motors. Ordered new blades and a new motor; after installing the new parts the bird still didnít fly very well. Essentially as soon as I received the V911 I was done flying this helicopter.

Here's a list of the gear that I own.

MJX T-23 (mistake, I think I'm going to disassemble it for parts)
WL Toys V911 - 6 (three lost in the wind, 3 remain) BNF (all but the 1st one)
WL Toys V912 BNF
WL Toys V913
Blade SR
Blade 130X
Blade 180 CFX Received from Chespilker
Blade Red Bull BO-105 CB 130X
WL Toys V977 (w/Tx)
HeliMax Axe 100
Skyartec Wasp Nano CPx
HiSky HFP 80 V1 x2
HiSky HFP 80 V2 x2
HiSky HFP 100 V1 x2
HiSky HFP 100 V2 x2
HiSky HFP 100FS
HiSky HCP 80 V1 x 2
HiSky HCP 100 x 2
Walkera Mini CP x 2
Walkera Master CP Given to Florida Heli
Walkera V120D02S Given to Chespilker
JR Forza 450 3D Kit w/Motor
Tarot 450 Pro V2 FBL Kit (nothing but the heli and blades)

Hubsan X4 (w/Tx)
WL Toys V959 (w/Tx)
WL Toys V262 (w/Tx)
Tarot Mini 250 Quad Kit
ZMR 250 Quad Kit

Devo 10 with nRF24L01 module installed
Hisky X-6S Transmitter (with updated PCB installed)
Spectrum DX6i Transmitter
Skyartec NASA 701
HiSky HT-8 Transmitter Module
Tactic AnyLink Transmitter Module
Posted by dteel | Apr 14, 2014 @ 06:18 PM | 3,882 Views
12/27/2013 V911 RTF Amazon $41.29
03/01/2014 V911 BNF New Egg $22.36
03/01/2014 V913 RTF Amazon $85.80
03/09/2014 V912 BNF Amazon $49.99
03/10/2014 V911 BNF w/parts New Egg 25.78
03/17/2014 V911 BNF New Egg $22.36
03/20/2014 Blade SR Amazon $139.74
03/21/2014 V911 BNF $25.78
04/11/2014 V911 BNF Banggood $18
04/11/2014 V977 RTF Banggood $99.99
04/11/2014 Helimax Axe-100 FP BNF Amazon $49.99
04/16/2014 HiSKY HFP80 V1 BNF TMart $41.47
04/16/2014 HiSKY HFP100FS (V1) BNF TMart $43.77
04/27/2014 Hubsan X4 RTF Quad Copter Amazon $47.79
06/11/2014 HISKY HFP80 (V2) Banggood $36.99
07/16/2014 Hisky HFP100 (V2) TMart $38.99
07/28/2014 Hisky HFP100 (V2) BNF Banggood $39.99
08/01/2014 Hisky HCP100 BNF Banggood $39.99
08/07/2014 HISKY HFP80 (V2) Banggood $36.99
08/20/2014 Walkera Master CP Banggood $141.99
08/21/2014 Blade 130X EBay seller $130
11/19/2014 HiSky HCP100 Banggood $55.49
11/19/2014 Walkera Mini CP Banggood $79.88
12/30/2014 Walkera V120D02S, Walkera Helicopter Supply $118.96
01/14/2015 JR Forza 450 3D Kit w/Motor
01/22/2015 Blade Red Bull BO-105 CB 130X $69
02/11/2015 FT Spitfire Speed Build Kit Flite Test $36.00
02/14/2015 P-51D Mustang Ultra-Micro BNF $89.99
03/02/2015 Tarot 450 PRO V2 FBL Kit Banggood $129.88
03/17/2015 Tarot Mini 250 Quad Kit Ebay seller CheerWing $40.89
04/27/2015 ZMR 250 Quad Kit (CF) from Banggood $33.60
04/29/2015 AXN Floater-Jet Glider from HobbyKing $76.94