New Products Flash Sale
XQPOWER's blog
Posted by XQPOWER | Jul 02, 2015 @ 09:22 PM | 788 Views
8.5kg High speed all Alu CNC servo XQ-S4308D


Size :A:40.2mm B:20.1mm C:38.8mm

Operating Temperature Range: -15~60℃

Weight:65g 0.2(2.29oz);

Bearingual ball bearing
Gear type:All Titanium Gear;

Speed:0.07sec/60 at (6V)
0.09sec/60 at (4.8V)

Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)

Pulse width range: 800~2200sec
Dead band width: 2 μsec

Blocking protection: Yes

Adopting high-grade all Aluminum CNC case, special shielded servo wire.




XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 25, 2015 @ 08:31 PM | 1,003 Views
Many drivers tested our new all Alu case servo XQ-S4330D feedback us that
they love the working performances of this servo,especially on rock crawlers.

Are you a rock crawler 'fancier'? If so,you should not miss this servo. Contact
your local shops for the availability of servo XQ-S4330D.


Size :A:40.2mm B:20.1mm C:38.8mm

Weight:65g 0.2(2.29oz);
Gear type:All Titanium Gear;

Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)

Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)


PS:XQ-S4330D servo adopt special shielded servo wire.



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 18, 2015 @ 02:47 AM | 1,322 Views
1) 25g Micro Digital Servo XQ-S2025D

Size:36mm*15.2mm*28.8mm
Weight:25g
Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V
Torque: (34.7 oz-in)2.5kg @4.8V
(40.3 oz-in)2.9kg @6.0V

Ideal for rudder on 450 level helis, CCPM on 500 level helis, and steering
servo on 1/12th scale cars.



2) Golden Low Profile Digital Servo XQ-S3008D

Weight:48.5g (1.71oz)
Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

Specially-made for 1/10 Touring/Drift cars, okay to be used on fuel boats
or as airplane wing servo.



3) all Alu CNC Servo XQ-S4308D

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.07sec/60 at (6V)
0.09sec/60 at (4.8V)
Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)


Ideal for 1/10 Buggy steering, airplane and helicopter tail.




XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 10, 2015 @ 05:26 AM | 1,294 Views
1) 21kg High Torque Digital Servo XQ-S4120D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.16sec/60 at (7.4V)
0.14sec/60 at (8.5V)
Torque: (247 oz-in)17.8kg.cm.at(7.4V)
(292 oz-in)21.0kg.cm.at(8.5V)



2) New High Speed Digital Servo XQ-S4116F

Size :A:40.2mm B:20.1mm C:38.8mm
Gear type:All Titanium Gear;
Speed:0.08 sec/60 at (7.4V)
0.10sec/60at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)



3) 17kg High Torque Digital Servo XQ-S4116D

Gear type:All Titanium Gear;
Speed:0.14sec/60 at (7.4V)
0.12sec/60 at (8.5V)
Torque: (205.5 oz-in)14.8kg.cm.at(7.4V)
(234.7 oz-in)16.9kg.cm.at(8.5V)



4) 14.5kg High Torque Digital Servo XQ-S4113D

Speed:0.13sec/60 at (7.4V)
0.11sec/60 at (8.5V)
Torque: (168 oz-in)12.1kg.cm.at(7.4V)
(201 oz-in)14.5kg.cm.at(8.5V)




Quality First,Strive for Perfection!
XQ POWER www.xq-power.com
Posted by XQPOWER | Jun 03, 2015 @ 05:49 AM | 1,699 Views
1) 60kg High Voltage Brushless Servo XQ-S5650D

Size :A:60.1mm B:30.1mm C:59.7mm
Weight:177.5g (6.25oz);
Gear type:Metal Gear;
Speed:0.20 sec/60 at (9.6V)
0.18 sec/60 at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)

Compatible with 3S lipo battery; 180 degree rotation adjustable




2) 40kg Heavy Duty Digital Servo XQ-S5040D

Size :A:60.1mm B:30.1mm C:59.7mm
Weight:177.5G(6.25oz);
Gear type:Metal Gear;
Speed: 0.20sec/60 at (6V)
0.18sec/60 at (7.2V)
Torque: (465 oz-in)33.5kg.cm.at(6V)
(553 oz-in)39.8kg.cm.at(7.2V)




3) New 30kg Standard Tough CNC Servo XQ-S4330D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

Special tamper-proof servo wire; all aluminum CNC housing





Quality First, Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 27, 2015 @ 04:46 AM | 1,395 Views
Golden low profile servo XQ-S3008D made for 1/10 Drift Kits, 1/10 Touring Kits,
1/10 Pan Cars and TC.

Size:A:40.2mm B:20.1mm C:29.4mm

Weight:48.5g (1.71oz)

Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V

Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

Voltage:4.8V-7.2V


--Highly waterproof, Aluminum middle case for quick heat dispersion.




Quality First,Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 20, 2015 @ 04:28 AM | 1,515 Views
Looking for a tough servo on large scale vehicles and aircrafts?
Check out the 30kg coreless servo XQ-S4330D.

Size :A:40.2mm B:20.1mm C:38.8mm

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;

Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)

Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

-Unique tamper-proof servo wire (photo 2)

-Entire case made from high precision CNC milled aluminum (photo 3)

-Exquisite Crystal Box Packaging (photo 4)


Want it in different colors,like green? LOL (photo 5)




Quality First,Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 12, 2015 @ 09:40 PM | 1,370 Views
Hi,guys.here is few servos extremely popular among car drivers.

1) Low Profile Coreless Servo XQ-S3008D

Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

It is a specially-made servo for 1/10 touring, drfit cars.Any of you who
have a big passion in these car types, you shouldn't miss this servo.



2) All Aluminum CNC Servo XQ-S4330D (30kg)

Gear type:Titanium Gear;
Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

Entire case made from high precision milled CNC aluminum and adopting
unique tamper-proof servo wire,extremely strong and durable in performance.



3) 7.4V High Speed Digital Servo XQ-S4116F

Gear type:Titanium Gear;
Speed:0.08 sec/60 at (7.4V)
0.10sec/60at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)

If you are looking for a high speed steering servo,have a very good
look on the spec of this servo.



4) 0.092s Brushless CNC Servo XQ-S8308D

Gear type:Titanium Gear;
Speed:0.092sec/60 at (6V)
0.11sec/60 at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)

0.092s/23kg.cm super high speed at 6.0V.It belongs to XQ POWER top range
servos,ideal for 1/8 high-level competitions.



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | May 05, 2015 @ 03:15 AM | 1,462 Views
1) XQ-S8308N, a new 760μs professional tail servo newly released

Pulse width range: 760usec
Speed:0.038sec/60 deg at (6V)
0.042sec/60 deg at (4.8V)
Torque: (83.3 oz-in)6.0kg.cm.at(6V)
(62.5 oz-in)4.8kg.cm.at(4.8V)



2) 0.081s 17.0kg Brushless Servo XQ-S8308D

Speed:0.081sec/60 at (6V)
0.095sec/60 at (4.8V)
Torque: (236.1 oz-in)17kg.cm.at(6V)
(208.3 oz-in)15kg.cm.at(4.8V)



3) 0.092s 23kg Brushless Servo XQ-S8320D

Speed:0.092sec/60 at (6V)
0.11sec/60 at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)



4) 0.056s 8.5kg Brushless Servo XQ-S8308D

Speed:0.056sec/60 at (6V)
0.068sec/60 at (4.8V)
Torque: (118.1 oz-in)8.5kg.cm.at(6V)
(97.2 oz-in)7.0kg.cm.at(4.8V)


Precise,Fast and Strong.They are ideal servos for high-value airplanes and helicopters.


XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Apr 28, 2015 @ 09:52 PM | 1,940 Views
Hello Guys,

We attend the Beijing International Hobby Expo last week!
Here attached is some photos for you.

Do you live the design and layout of our booth? LOL

If you missed the catalog at the exhibition, PM me.
There are 80 servo options in XQ POWER catalog,you got to check them out.


XQ POWER Marketing Department
www.xq-power.com
Discussion / Posted by XQPOWER / Apr 20, 2015 @ 03:17 AM / 1,656 Views / 0 Comments / Reply
This entry is temporarily hidden while XQPOWER edits it.
Discussion / Posted by XQPOWER / Apr 10, 2015 @ 10:35 PM / 2,501 Views / 0 Comments / Reply
This entry is temporarily hidden while XQPOWER edits it.
Posted by XQPOWER | Apr 05, 2015 @ 08:28 PM | 1,957 Views
A. New Low Profile Digital Servo XQ-S3008D

Weight:48.5g (1.71oz)
Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V



B. 0.056s Brushless Servo XQ-S8308D


Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.056sec/60 at (6V)
0.068sec/60 at (4.8V)
Torque: (118.1 oz-in)8.5kg.cm.at(6V)
(97.2 oz-in)7.0kg.cm.at(4.8V)



C. 21.8kg Coreless Digital Servo XQ-S4020D

Speed:0.13sec/60 at (6V)
0.15sec/60 at (4.8V)
Torque: (302.8 oz-in)21.8kg.cm.at(6V)
(256.9 oz-in)18.5kg.cm.at(4.8V)



D. All Aluminum Digital Servo XQ-S4315D

Speed:0.10sec/60 at (6V)
0.12sec/60 at (4.8V)
Torque: (208 oz-in)15kg.cm.at(6V)
(181 oz-in)13kg.cm.at(4.8V)



E. 60kg Brushless Servo XQ-S5650D

Weight:177.5g (6.25oz);
Gear type:Metal Gear;
Speed:0.20 sec/60 at (9.6V)
0.18 sec/60 at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)




XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Mar 27, 2015 @ 10:22 PM | 2,366 Views
Some of you may have wondered why XQ POWER brushless CNC servos(XQ-S83**) and digital CNC servos
(XQ-S48**/-S43**) are so gelivable(precise and strong) in the racing.

Three points listed below may explain a big part:
1) All Aluminum CNC case Entire case of all these three series servos are made from high precise CNC milled
aluminum,which can endure intensive high-stresses caused in the middle of racing/flying. It differs widely
from common full metal cases.


2) Unique Tamper-proof servo wire The black tample-proof servo wire as listed in the attachment below can
protect the servo from being interfered by any other signals,thus ensure a precise and strong performance
of the servo all the time.


3)Above all, XQ POWER has a group of innovative engineers.They are well-experienced and always in the
position to develop and test new servos using their expertise.


High-grade servo materials adopting combined with advanced technology,thats why XQ servos have been gaining
more and more popularity over the years.
Posted by XQPOWER | Mar 20, 2015 @ 10:57 PM | 2,988 Views
Beautiful style servo XQ-S43, XQ-S48 series in All Aluminum CNC housing,have become our best seller servos.
Although they are specially launched for large scale aircraft in the first place,many rc modelers have used them
on 1/10th, 1/8th cars with a great success.

Here is the big question---which color do you think XQ-S43, XQ-S48 series servo are, pink, purple or rose?

1) All Aluminum servo XQ-S4308D for 1/10th Buggy

Speed:0.07sec/60 at (6V)
0.09sec/60 at (4.8V)
Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)



2) 15kg Full Metal Case Servo XQ-S4315D

Speed:0.10sec/60 at (6V)
0.12sec/60 at (4.8V)
Torque: (208 oz-in)15kg.cm.at(6V)
(181 oz-in)13kg.cm.at(4.8V)



3) All Aluminum servo XQ-S4320D for 1/8th Buggy

Speed:0.12sec/60 at (6V)
0.14sec/60 at (4.8V)
Torque: (278 oz-in)20kg.cm.at(6V)
(239 oz-in)17.2kg.cm.at(4.8V)



4) New 30kg Full Metal Case Servo XQ-S4330D

Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)


High voltage version of these series servo is XQ-S48 series servos.



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Mar 13, 2015 @ 10:18 PM | 2,741 Views
1) Strong All Aluminum Tail Servo XQ-S8308D

Speed:0.056sec/60 at (6V)
0.068sec/60 at (4.8V)
Torque: (118.1 oz-in)8.5kg.cm.at(6V)
(97.2 oz-in)7.0kg.cm.at(4.8V)

:Unique tamper-proof servo wire for maintaining fast,strong and precise
working performance all the time



2) 17kg All Aluminum Cyclic Servo XQ-S8315D

Speed:0.081sec/60 at (6V)
0.095sec/60 at (4.8V)
Torque: (236.1 oz-in)17kg.cm.at(6V)
(208.3 oz-in)15kg.cm.at(4.8V)

:Unique tamper-proof servo wire for maintaining fast,strong and precise
working performance all the time



3) 23kg Strong All Aluminum Cyclic Servo XQ-S8320D

Speed:0.092sec/60 at (6V)
0.11sec/60 at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)

:Unique tamper-proof servo wire for maintaining fast,strong and precise
working performance all the time



4) 20kg Brushless Cyclic Servo XQ-S4618D

Speed:0.12sec/60 at (4.8V)
0.10sec/60 at (6.V)
Torque: (242 oz-in)17.4kg.cm.at(4.8V)
(285 oz-in)20.5kg.cm.at(6.0V)


XQ POWER classical brushless servo XQ-S4615D, XQ-S4618D have been widely used in various
rc applications, especially on 100cc airplanes and helicopters.

The full metal case XQ-S83 series brushless servo are even more strong and fast in operation,catering
to those extremely demanding rc modelers' needs.


XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Mar 06, 2015 @ 03:04 AM | 2,349 Views
1) 11.1V Monster Brushless Servo XQ-S5650D

Weight:177.5g (6.25oz);
Gear type:Metal Gear;
Speed:0.20 sec/60 at (9.6V)
0.18 sec/60 at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)

Application: 270cc to 300cc giant aircraft; 1/5th offroad/onroad car;
Formula Student race car; Humanoid robots, 6 degree robot arms;
RC Blimp&Airships,etc.,

180 degree version of XQ-S5650D is available(when 500μ sec~2500μ sec)



2) 11.1V 30kg Titanium Gear Digital Servo XQ-S4230D

Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.15sec/60 at (9.6V)
0.13sec/60 at (12V)
Torque: (340 oz-in)24.5kg.cm.at(9.6V)
(428 oz-in)30.8kg.cm.at(12V)

Application: 150cc to 170cc aircraft; 700 helicopter cyclic servo;
Formula Student race car; RC Blimp & Airships; other automation
building,etc



3) 11.1V 20kg High Voltage Digital Servo XQ-S4220D

Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.15sec/60 at (9.6V)
0.13sec/60 at (12V)
Torque: (243 oz-in)17.5kg.cm.at(9.6V)
(286 oz-in)20.6kg.cm.at(12V)

Application: 120cc to 150cc aircraft; 700 helicopter cyclic servo;
industrial automation building,etc



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Feb 27, 2015 @ 07:46 PM | 3,545 Views
Here listed is few beautiful style XQ POWER servos with high popularity.

a) 20kg Unique Pink Servo XQ-S4320D

Gear type:Titanium Gear;
Speed:0.12sec/60 at (6V)
0.14sec/60 at (4.8V)
Torque: (278 oz-in)20kg.cm.at(6V)
(239 oz-in)17.2kg.cm.at(4.8V)



b) 30kg Unique Pink Servo XQ-S4330D

Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)



c) New Golden Low Profile Servo XQ-S3008D

Weight:48.5g (1.71oz)
Speed:0.09sec/60 @4.8V
0.07sec/60 @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V



d) 60kg Monster Brushless Servo XQ-S5650D

Weight:177.5g (6.25oz);
Gear type:Metal Gear;
Speed:0.20 sec/60 at (9.6V)
0.18 sec/60 at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)



e) 17kg Superfast Brushless Servo XQ-S8315D

Speed:0.081sec/60 at (6V)
0.095sec/60 at (4.8V)
Torque: (236.1 oz-in)17kg.cm.at(6V)
(208.3 oz-in)15kg.cm.at(4.8V)



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Feb 12, 2015 @ 12:26 AM | 3,056 Views
XQ POWER unique pink & silver servos in All Aluminum CNC cases,
adopting special tamper-proof black servo wire:

1) 17kg/0.081s Brushless servo XQ-S8315D

Weight:65g 0.2 (2.29oz);
Gear type:Titanium Gear;
Speed:0.081sec/60 at (6V)
0.095sec/60 at (4.8V)
Torque: (236.1 oz-in)17kg.cm.at(6V)
(208.3 oz-in)15kg.cm.at(4.8V)



2) 23kg/0.092s Brushless servo XQ-S8320D

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.092sec/60 at (6V)
0.11sec/60 at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)



4) New 30kg Full Metal Case XQ-S4330D

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.18sec/60 at (6.0V)
0.20sec/60 at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)



4) 8.5kg/0.056s Brushless servo XQ-S8308D

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.056sec/60 at (6V)
0.068sec/60 at (4.8V)
Torque: (118.1 oz-in)8.5kg.cm.at(6V)
(97.2 oz-in)7.0kg.cm.at(4.8V)



A new 760μs /560hz professional tail servo XQ-S8308N,of XQ-S83 series for helicopter
is under testing and will be available to order soon!


XQ POWER Marketing Department
Website: www.xq-power.com
Posted by XQPOWER | Feb 06, 2015 @ 01:16 AM | 3,407 Views
XQ POWER hot selling 7.4V high voltage digital servos:

1) 20kg HV Digital servo XQ-S4120D

Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.16sec/60 at (7.4V)
0.14sec/60 at (8.5V)
Torque: (247 oz-in)17.8kg.cm.at(7.4V)
(292 oz-in)21.0kg.cm.at(8.5V)

Ideal for 50cc~120cc airplanes; 600 helicopter cyclic,;1/5th scale throttle,
1/8 on road&off road,1/10 off road car; nitro boats..



2) 15kg HV Digital servo XQ-S4116F

Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.08 sec/60 at (7.4V)
0.10sec/60at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)

Perfect for 1/8 Tout Terrain buggy steering; 600, 700 size helicopter cyclic;
and airplanes, boats also.



3) 7.4V All Aluminum Digital servo XQ-S4820D

Weight:65g 0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.12sec/60 at (8.5V)
0.14sec/60 at (7.2V)
Torque: (278 oz-in)20kg.cm.at(8.5V)
(239 oz-in)17.2kg.cm.at(7.2V)



4) 17kg HV Digital servo XQ-S4113D

Weight:56g 0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.13sec/60 at (7.4V)
0.11sec/60 at (8.5V)
Torque: (168 oz-in)12.1kg.cm.at(7.4V)
(201 oz-in)14.5kg.cm.at(8.5V)



XQ POWER Marketing Department
Official Website: www.xq-power.com