New Products Flash Sale
XQPOWER's blog View Details
Posted by XQPOWER | Aug 31, 2015 @ 03:35 AM | 1,274 Views
After a long test, XQ-S83** line has been recognized as perfect servo series
for Helicopter Swashplate by professional pilots.

a) 0.056s Brushless Tail Servo XQ-S8308D 1500uSec centre - 333Hz

* 64g Dual ball-bearing
* colour - Silver Aluminium CNC 100% metal case
* body = 40*39.4*20mm
* mounting holes 49mm*10mm
* speed 0.056sec/60 °@6.0V ; 0.042sec/60° @7.2V max
* Torque : 8.5kg.cm @6.0V ; 9.7kg.cm @7.2V max
* lead wires are 280mm
* idle current 20mA
* running current 250mA
* Stall current 2.3 amps
* centre position 1500uSec
* range 900-2100uSec



b) 23kg 0.092s Brushless Cyclic Servo XQ-S8320D (333Hz)

Speed:0.092sec/60º at (6V)
0.11sec/60º at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)


PS:Can handle 7.2V maximum.Speed,torque spec increase 10~15% when
used on higher voltage like 6.6V.



XQ POWER High Performance Servo
URl:http://www.xq-power.com/XQ-S83/
Posted by XQPOWER | Aug 21, 2015 @ 10:37 PM | 1,156 Views
Guys,

The golden Low Profile Servo XQ-S3008D is one of the hottest servo of the year.
It it a high speed servo specially-made for 1/10 touring / drift competitions.

Here are the technical specs: (waterproof)

Size:A:40.2mm B:20.1mm C:29.4mm
Weight:48.5g (1.71oz)

Speed: 0.09sec/60° @4.8V
0.07sec/60° @6.0V

Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

Supports 4.8V - 7.2V(maximum), highest speed may reach 0.06s when used at 7.0V.
Dual ball bearing, all titanium gear, aluminum middle shell.


PS:low profile XQ-S3008D can also be used on airplane wings, fuel boats
and other RCs like TC, formula cars.



URL:http://www.xq-power.com/XQ-S30P/show_64.html
Posted by XQPOWER | Aug 14, 2015 @ 08:52 PM | 1,065 Views
Here below are the HV Full Aluminum servos adopting special
shielded servo wire, full aluminum CNC case.
They support 6.0V-8.5V


1. 0.07s Full Aluminum Digital Servo XQ-S4808D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:65g ±0.2(2.29oz);
Gear type:All Titanium Gear;
Speed:0.07sec/60º at (8.5V)
0.09sec/60º at (7.2V)
Torque: (118 oz-in)8.5kg.cm.at(8.5V)
(104 oz-in)7.5kg.cm.at(7.2V)



2. 15kg Full Aluminum Digital Servo XQ-S4815D

Gear type:All Titanium Gear;
Speed:0.10sec/60º at (8.5V)
0.12sec/60º at (7.2V)
Torque: (208 oz-in)15kg.cm.at(8.5V)
(181 oz-in)13kg.cm.at(7.2V)



3. 20kg Full Aluminum Digital Servo XQ-S4820D

Speed:0.12sec/60º at (8.5V)
0.14sec/60º at (7.2V)
Torque: (278 oz-in)20kg.cm.at(8.5V)
(239 oz-in)17.2kg.cm.at(7.2V)


The special shielded servo wire can protect the servo from other
interfering signals in operation,thus maintain a precise,strong
performance all the time.




XQ POWER Model Electronics Co.,Ltd
www.xq-power.com
Posted by XQPOWER | Aug 07, 2015 @ 08:51 PM | 1,291 Views
Guys,take a good look on the unique pink servos below. 8kg, 15kg, 20kg
torque version are all available. A new member of 30kg torque has been
added to this big family.


1) 30kg Tough CNC Digital Servo XQ-S4330D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:65g ±0.2(2.29oz);
Gear type:All Titanium Gear;
Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)




2) 20kg CNC Digital Servo XQ-S4320D

Gear type:Titanium Gear;
Speed:0.12sec/60º at (6V)
0.14sec/60º at (4.8V)
Torque: (278 oz-in)20kg.cm.at(6V)
(239 oz-in)17.2kg.cm.at(4.8V)




3) High Speed Digital Servo XQ-S4308D

Speed:0.07sec/60º at (6V)
0.09sec/60º at (4.8V)
Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)





XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jul 31, 2015 @ 03:27 AM | 1,695 Views
1). 30kg Digital Servo XQ-S4330D in all Aluminum CNC housing

Size :A: 40.2mm B: 20.1mm C:38.8mm

Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

It is a high torque servo in standard size. Ideal for demanding
1/10 Rock Crawlers, 1/5th scale cars.



2). 40kg Heavy Duty Digital Servo XQ-S5040D

Size: A:60.1mm B:30.1mm C:59.7mm

Speed:0.20sec/60º at (6V)
0.18sec/60º at (7.2V)
Torque: (465 oz-in)33.5kg.cm.at(6V)
(553 oz-in)39.8kg.cm.at(7.2V)

XQ-S5040D is a classical digital servo that has been widely used
on different 1/5 cars, and large scale aircrafts.



3). 60kg Heavy Duty Brushless Servo XQ-S5650D

Size: A:60.1mm B:30.1mm C:59.7mm

Speed:0.20 sec/60 deg at (9.6V)
0.18 sec/60° deg at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)

BLS XQ-S5650D used most on 270CC, 300CC giant aircrafts, 8m-
10m RC Blimp&Airship, and big robotic projects, industrial automation



Browse our website for a wide range of 80 high performance servos.
you'll find something really interests you. :-)



XQ POWER Model Electronics Co., Ltd
www.xq-power.com
Posted by XQPOWER | Jul 24, 2015 @ 02:21 AM | 1,766 Views
-- 15kg 7.4V High Voltage Digital Servo XQ-S4116F

Speed:0.08 sec/60° at (7.4V)
0.10sec/60°at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)

:For 1/8 off road, 600 helicopter combo




-- 8.5kg Low Profile Digital Servo XQ-S3008D

Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

:Extremely suitable for 1/10 Touring, 1/10 Drift cars;
airplane wings and nitro boats




-- 0.038s 760usec Brushless Servo XQ-S8308N

Pulse width range: 760usec

Speed:0.038sec/60 deg at (6V)
0.042sec/60 deg at (4.8V)
Torque: (83.3 oz-in)6.0kg.cm.at(6V)
(62.5 oz-in)4.8kg.cm.at(4.8V)

:A new 760 usec professional brushless tail servo for 700 size,
800 size high value helicopters.


PS:You can view their technical spec sheets on our official website.


Wish all of you a nice weekend!




XQ POWER Model Electronics Co.,Ltd
www.xq-power.com
Posted by XQPOWER | Jul 17, 2015 @ 01:38 AM | 940 Views
Browse at our official website www.xq-power.com for all ranges of XQ POWER
servos,we have more than 80 servo options to meet different rc needs.


Should you have any questions about our servos,feel free to drop us a message.
we'll go back to you as soon as possible.


Alternatively,please send us your address and post code,we'll forward your
request to our local business partners.



XQ POWER
Web:www.xq-power.com
Posted by XQPOWER | Jul 09, 2015 @ 10:36 PM | 1,299 Views
a. 0.07s Low Profile Servo XQ-S3008D

It is the new hottest XQ servo of the year,extremely suitable for 1/10 Touring,
Drift cars

Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V



b. all Aluminum CNC servo XQ-S4315D

Some of you might ask 'why is XQ POWER full aluminum servo so special,
I see many other companies offer aluminum servos also'?

-I'd say it is not just the patent color and design,or the all aluminum CNC case.,high grade
servo materials we adopt. It is the expertise and technology our Engineering Dept has and
improved over the past years of high performance servo developing.

Speed:0.10sec/60º at (6V)
0.12sec/60º at (4.8V)
Torque: (208 oz-in)15kg.cm.at(6V)
(181 oz-in)13kg.cm.at(4.8V)



c. 21.8kg Digital Servo XQ-S4020D

It's a classical digital servo that has been widely used on 1/8th vehicles, 50cc+
airplanes, and fuel boats.,

Speed:0.13sec/60º at (6V)
0.15sec/60º at (4.8V)
Torque: (302.8 oz-in)21.8kg.cm.at(6V)
(256.9 oz-in)18.5kg.cm.at(4.8V)



d. 60kg Heavy Duty Brushless Servo XQ-S5650D

For 270cc+ gaint aircraft, giant RC Blimp/Airship building, giant robotic projects;
other industrial automation.,XQ-S5650D is your perfect option.

Speed:0.20 sec/60 deg at (9.6V)
0.18 sec/60° deg at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)



e. Top Rang Superfast Brushless Servo XQ-S8308D






XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jul 02, 2015 @ 09:22 PM | 1,282 Views
8.5kg High speed all Alu CNC servo XQ-S4308D


Size :A:40.2mm B:20.1mm C:38.8mm

Operating Temperature Range: -15~60℃

Weight:65g ±0.2(2.29oz);

Bearingual ball bearing
Gear type:All Titanium Gear;

Speed:0.07sec/60º at (6V)
0.09sec/60º at (4.8V)

Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)

Pulse width range: 800~2200µsec
Dead band width: 2 μsec

Blocking protection: Yes

Adopting high-grade all Aluminum CNC case, special shielded servo wire.




XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 25, 2015 @ 08:31 PM | 1,392 Views
Many drivers tested our new all Alu case servo XQ-S4330D feedback us that
they love the working performances of this servo,especially on rock crawlers.

Are you a rock crawler 'fancier'? If so,you should not miss this servo. Contact
your local shops for the availability of servo XQ-S4330D.


Size :A:40.2mm B:20.1mm C:38.8mm

Weight:65g ±0.2(2.29oz);
Gear type:All Titanium Gear;

Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)

Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)


PS:XQ-S4330D servo adopt special shielded servo wire.



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 18, 2015 @ 02:47 AM | 1,684 Views
1) 25g Micro Digital Servo XQ-S2025D

Size:36mm*15.2mm*28.8mm
Weight:25g
Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V
Torque: (34.7 oz-in)2.5kg @4.8V
(40.3 oz-in)2.9kg @6.0V

Ideal for rudder on 450 level helis, CCPM on 500 level helis, and steering
servo on 1/12th scale cars.



2) Golden Low Profile Digital Servo XQ-S3008D

Weight:48.5g (1.71oz)
Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

Specially-made for 1/10 Touring/Drift cars, okay to be used on fuel boats
or as airplane wing servo.



3) all Alu CNC Servo XQ-S4308D

Weight:65g ±0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.07sec/60º at (6V)
0.09sec/60º at (4.8V)
Torque:8.5kg.cm.at(6V)
7.5kg.cm.at(4.8V)


Ideal for 1/10 Buggy steering, airplane and helicopter tail.




XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Jun 10, 2015 @ 05:26 AM | 1,661 Views
1) 21kg High Torque Digital Servo XQ-S4120D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:56g ±0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.16sec/60º at (7.4V)
0.14sec/60º at (8.5V)
Torque: (247 oz-in)17.8kg.cm.at(7.4V)
(292 oz-in)21.0kg.cm.at(8.5V)



2) New High Speed Digital Servo XQ-S4116F

Size :A:40.2mm B:20.1mm C:38.8mm
Gear type:All Titanium Gear;
Speed:0.08 sec/60° at (7.4V)
0.10sec/60°at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)



3) 17kg High Torque Digital Servo XQ-S4116D

Gear type:All Titanium Gear;
Speed:0.14sec/60º at (7.4V)
0.12sec/60º at (8.5V)
Torque: (205.5 oz-in)14.8kg.cm.at(7.4V)
(234.7 oz-in)16.9kg.cm.at(8.5V)



4) 14.5kg High Torque Digital Servo XQ-S4113D

Speed:0.13sec/60º at (7.4V)
0.11sec/60º at (8.5V)
Torque: (168 oz-in)12.1kg.cm.at(7.4V)
(201 oz-in)14.5kg.cm.at(8.5V)




Quality First,Strive for Perfection!
XQ POWER www.xq-power.com
Posted by XQPOWER | Jun 03, 2015 @ 05:49 AM | 2,091 Views
1) 60kg High Voltage Brushless Servo XQ-S5650D

Size :A:60.1mm B:30.1mm C:59.7mm
Weight:177.5g (6.25oz);
Gear type:Metal Gear;
Speed:0.20 sec/60 at (9.6V)
0.18 sec/60° at (12.0V)
Torque: (667 oz-in)48kg.cm.at(9.6V)
(833 oz-in)60 kg.cm.at(12.0V)

Compatible with 3S lipo battery; 180 degree rotation adjustable




2) 40kg Heavy Duty Digital Servo XQ-S5040D

Size :A:60.1mm B:30.1mm C:59.7mm
Weight:177.5G(6.25oz);
Gear type:Metal Gear;
Speed: 0.20sec/60º at (6V)
0.18sec/60º at (7.2V)
Torque: (465 oz-in)33.5kg.cm.at(6V)
(553 oz-in)39.8kg.cm.at(7.2V)




3) New 30kg Standard Tough CNC Servo XQ-S4330D

Size :A:40.2mm B:20.1mm C:38.8mm
Weight:65g ±0.2(2.29oz);
Gear type:Titanium Gear;
Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

Special tamper-proof servo wire; all aluminum CNC housing





Quality First, Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 27, 2015 @ 04:46 AM | 1,839 Views
Golden low profile servo XQ-S3008D made for 1/10 Drift Kits, 1/10 Touring Kits,
1/10 Pan Cars and TC.

Size:A:40.2mm B:20.1mm C:29.4mm

Weight:48.5g (1.71oz)

Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V

Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

Voltage:4.8V-7.2V


--Highly waterproof, Aluminum middle case for quick heat dispersion.




Quality First,Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 20, 2015 @ 04:28 AM | 1,947 Views
Looking for a tough servo on large scale vehicles and aircrafts?
Check out the 30kg coreless servo XQ-S4330D.

Size :A:40.2mm B:20.1mm C:38.8mm

Weight:65g ±0.2(2.29oz);
Gear type:Titanium Gear;

Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)

Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

-Unique tamper-proof servo wire (photo 2)

-Entire case made from high precision CNC milled aluminum (photo 3)

-Exquisite Crystal Box Packaging (photo 4)


Want it in different colors,like green? LOL (photo 5)




Quality First,Strive for Perfection!
XQ POWER
Posted by XQPOWER | May 12, 2015 @ 09:40 PM | 1,770 Views
Hi,guys.here is few servos extremely popular among car drivers.

1) Low Profile Coreless Servo XQ-S3008D

Speed:0.09sec/60° @4.8V
0.07sec/60° @6.0V
Torque: (97 oz-in)7kg @4.8V
(118 oz-in)8.5kg @6.0V

It is a specially-made servo for 1/10 touring, drfit cars.Any of you who
have a big passion in these car types, you shouldn't miss this servo.



2) All Aluminum CNC Servo XQ-S4330D (30kg)

Gear type:Titanium Gear;
Speed:0.18sec/60º at (6.0V)
0.20sec/60º at (4.8V)
Torque: (416.6 oz-in)30kg.cm.at(6.0V)
(374.9 oz-in)27kg.cm.at(4.8V)

Entire case made from high precision milled CNC aluminum and adopting
unique tamper-proof servo wire,extremely strong and durable in performance.



3) 7.4V High Speed Digital Servo XQ-S4116F

Gear type:Titanium Gear;
Speed:0.08 sec/60° at (7.4V)
0.10sec/60°at (6.6V)
Torque: (208.3 oz-in)15kg.cm.at(7.4V)
(180.5 oz-in)13kg.cm.at(6.6V)

If you are looking for a high speed steering servo,have a very good
look on the spec of this servo.



4) 0.092s Brushless CNC Servo XQ-S8308D

Gear type:Titanium Gear;
Speed:0.092sec/60º at (6V)
0.11sec/60º at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)

0.092s/23kg.cm super high speed at 6.0V.It belongs to XQ POWER top range
servos,ideal for 1/8 high-level competitions.



XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | May 05, 2015 @ 03:15 AM | 2,025 Views
1) XQ-S8308N, a new 760μs professional tail servo newly released

Pulse width range: 760usec
Speed:0.038sec/60 deg at (6V)
0.042sec/60 deg at (4.8V)
Torque: (83.3 oz-in)6.0kg.cm.at(6V)
(62.5 oz-in)4.8kg.cm.at(4.8V)



2) 0.081s 17.0kg Brushless Servo XQ-S8308D

Speed:0.081sec/60º at (6V)
0.095sec/60º at (4.8V)
Torque: (236.1 oz-in)17kg.cm.at(6V)
(208.3 oz-in)15kg.cm.at(4.8V)



3) 0.092s 23kg Brushless Servo XQ-S8320D

Speed:0.092sec/60º at (6V)
0.11sec/60º at (4.8V)
Torque: (319.4 oz-in)23kg.cm.at(6V)
(277.8 oz-in)20kg.cm.at(4.8V)



4) 0.056s 8.5kg Brushless Servo XQ-S8308D

Speed:0.056sec/60º at (6V)
0.068sec/60º at (4.8V)
Torque: (118.1 oz-in)8.5kg.cm.at(6V)
(97.2 oz-in)7.0kg.cm.at(4.8V)


Precise,Fast and Strong.They are ideal servos for high-value airplanes and helicopters.


XQ POWER Marketing Department
www.xq-power.com
Posted by XQPOWER | Apr 28, 2015 @ 09:52 PM | 2,450 Views
Hello Guys,

We attend the Beijing International Hobby Expo last week!
Here attached is some photos for you.

Do you live the design and layout of our booth? LOL

If you missed the catalog at the exhibition, PM me.
There are 80 servo options in XQ POWER catalog,you got to check them out.


XQ POWER Marketing Department
www.xq-power.com
Discussion / Posted by XQPOWER / Apr 20, 2015 @ 03:17 AM / 2,206 Views / 0 Comments / Reply
This entry is temporarily hidden while XQPOWER edits it.
Discussion / Posted by XQPOWER / Apr 15, 2015 @ 02:33 AM / 7,690 Views / 0 Comments / Reply
This entry is temporarily hidden while XQPOWER edits it.