SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
edge_pilot's blog
Posted by edge_pilot | Apr 21, 2014 @ 07:24 PM | 1,620 Views
I got my 2 Carbon-Z Cubs all setup like I want, water or land, I am ready.

Both have Turnigy G60 Motors, Talon 90 ESC's, and custom graphics. The land version has Kavan 5" light weight wheels installed. I am running a Xoar 15x10 on the water version and will soon be switching the land version to the same.

These 2 planes are so much fun to fly on a daily basis, easy of assembly at the field really helps this. Don't let the "Cub" name fool you, these planes are fully 3D capable, even the float plane is not hindered from getting crazy every now and then.

Never have I flown such an easy plane to takeoff and land on water, this would definitely be a good trainer for float flying.
Posted by edge_pilot | Mar 15, 2014 @ 01:14 PM | 3,089 Views
Just recently I decided to build a couple more Atomik MM450 Dirt Bikes. As some of you know these are no longer produced and are going to get very rare soon. It really is a shame that they no longer are being made. Seams to be the general consensus of the R/C bike community that this was/is the best dirt bike of all time.

I went a few different directions on this second build.

# 1, and probably the biggest, difference is I used 2 part Epoxy paint for all the frame and engine pieces. This paint is extremely durable and will hold up much better than anything else you could use.

#2, I used sticker kits, bought at 2wheelhobbies, for all the body graphics. This speeded up the build process by days.

All and all I love these bikes and plan to keep these 2 around for some time. I have horded some parts to keep around for general maintenance. Here is my salute to such a great bike!
Posted by edge_pilot | Dec 28, 2013 @ 10:35 AM | 2,823 Views
Had this for some time but between getting kinks worked out with the mechanics, getting it assembled, and then finding a day in Ohio that the sun shines cans be rough.

Ordered this and received it with no issues. goes together very quickly if that is what you want. After first assembly I was test flying to make sure everything was OK before adding scale appearance. Good thing I did this because I had a bad vibration. In short it was coming from the head assembly and I had to wait on new parts from China. After the assembly of the new parts test flights started again. This time all was smooth and hassle free. I did some fine tuning on the flybarless unit along with some radio adjustments and ESC. I know have a super flying heli with a headspeed of only 1300 rpm's for the scale appearance.

Now it was time to do some scale detailing. The heli comes very scale with all rivets and such molded in, but I wanted more. I added the camera lenses to the nose, did some scale painting, added all the non-slip walk pads on all the skids and foot steps, 2 very scale pilot figures I received from Germany, and just little tid bits that gave it a personal touch.

Mechanics consist of recommended Align motor, Castle ESC, Skookum 540 FBL unit, and all digital servos for smooth flight. They recommend big batteries for balance so I went with 5300mah 6S packs (2 in series for 12S configuration). By the specs I am getting from the ESC during flight I can fly for 20 minutes with no problem!...Continue Reading
Posted by edge_pilot | Dec 28, 2013 @ 10:16 AM | 2,318 Views
Well I just got my Habu 32 done. Very straight forward build that was very enjoyable, even with the few mods.

The powerplant consist of a TJ80 EVO rotor Neu 1412 2Y PNP unit from Tam's. This I will be running on 12S to get the most out of it.

Need some serious batteries for a powerplant like that, so we are running the Genesis 3300mah 6S 65C packs. (2 of them in series to get 12S)

I went with the Tam struts as well on the gear because not everywhere is a nice smooth surface to fly.

Hitec HS-5085MG's all around keep the surfaces under control.

I added the front gear door to hopefully get a little more speed out of it. This was an option but I believe well worth it. Took some time to get it to operate smooth and seal nicely. I didn't use a servo for actuation because I didn't want to add the weight, so we just use the bungee system....Continue Reading
Posted by edge_pilot | Dec 21, 2013 @ 03:11 PM | 3,677 Views
Well after seeing the thread on the Flyzone Beaver here on RCG's, and noticing several guys doing makeovers I decided to give it a go.

I have always liked the de Havilland Beaver on floats. The full scale is such a cool plane with its versatility and all environment flying ability.

I bought the plane on a black Friday deal from Tower for what I thought was a very good price.

Right from the start I knew I would change it over to Spektrum DSMX so it will bind to my DX18QQ, not a big fan of the Anylink system. I got several ideas from the other guys that have done these makeovers before me, then I proceeded to add my own little quirks. I found a full scale Beaver that I liked to color scheme on and went to work. I hate to think how many hours I have in this plane, especially since it was suppose to be an ARF. I am very happy with the outcome and can't wait to get it outside on the water so I can get some nice pictures in the water and in the air. I guess even a foam ARF can be a lot of fun to build when you get creative.

Enjoy the pictures, the last one being the full scale that I got the color scheme from. Any questions please feel free to ask or visit the Flyzone Beaver thread here on RCG's for some very good information and some other very beautiful planes and video.

I have updated the pictures to outdoor pictures, I hate indoor shots....Continue Reading
Posted by edge_pilot | Mar 23, 2013 @ 11:21 AM | 7,983 Views
Well I got an MM450 dirtbike on trade to try something new. Turns out these things are a blast. Smile from ear to ear while running the very large dirt bike. For some that are not familiar with the bike it is 1/4 scale, making it the largest bike I have seen to date. These are equiped with an electric gyro in the rear wheel, this makes it very easy to run compared to most R/C bikes. Best part about this particular dirtbike, you can run it just about anywhere. This is something that can't be done with onroad race bikes.

After only having it for one week and getting to run it only one time I have since ordered a second bike! I want to enjoy this experience with some of my friends and family. If one of something is fun than two is twice as much fun.

This one now has several upgrades on it along with some custom painting and decals. I have added the front brake, chain adjusters, micro chain, big bore shock, triple tree clamps, upgraded bearing, front axle, and balanced the flywheel. All of these are definately my choice, the bike runs very well without any of them.

This is a new part of the hobby for me that has really caught my attention. I ride full scale bike and use to do alot of offroad riding in my younger years. Now I can have the thrill and stay out of the hospital. If your looking for that something different in R/C than maybe try one of these!
Posted by edge_pilot | Feb 16, 2012 @ 07:58 PM | 5,056 Views
Decided there was a cool part of the hobby that I wanted to explore, Rock Crawling. I love to build and fabricate, so these are the right choice for me. I have had alot of fun building this truck, even though it is not quite done yet. I started with an Axial SCX10 and ran from there. I think I ended up using the frame rails and the rear end housings! I added a DIG unit on the front axle so I can run it in 2WD or 4WD just as in full scale. I plan to get some high quality pictures in its envirenment soon, along with some video of it crawling.
Posted by edge_pilot | Dec 14, 2011 @ 06:33 PM | 5,646 Views
Just wanted to post pictures of my new bike. The bike is mostly Nuova Faor with aftermarket brakes, tires, and rider. I am running a 6.5 Novak motor and Novak GTB 2 ESC. Digital servos and a Futaba 2.4 Fasst radio are in control.

Bikes are fairly new for me and I don't see giving them up anytime soon. These add a whole new excitement to the hobby.