New Products Flash Sale
Knife Liddle's blog
Posted by Knife Liddle | Mar 16, 2015 @ 10:59 PM | 6,721 Views
I've decided to continue this topic on my blog so that it will stay on track. I welcome input from anyone who understands and follows the purpose of the thread.

Mission Statement........Find readily available, reasonably priced, components and assemble a dependable fan system in the 120mm class, that can deliver at least 20lbs of thrust.

I'll be looking at Dynamax, Ramtech, Jet Fan, and Turbax fans. They will be paired mainly with the 56mm series of inrunners made by Leopard Hobby, mainly due to success in early tests, and the fact that they are readily available and reasonably priced.

I've already seen peak thrust as high as 26lbs from a Dynamax running at approximately 12.5kw. So follow along or join in, but let's stick fairly close to the mission topic. Thanks, Lee
Posted by Knife Liddle | Mar 03, 2015 @ 04:36 AM | 2,767 Views
It seems the the established Electrolyte thread is mainly being used for a guide to assembling exact duplicates of Bret's prototype arf. Any questions about using different equipment or increasing performance is being viewed as insulting to the designer/developer, and is either received with silence or actual condemnation from a few.

So, I decided dedicated a blog entry to Electrolyte modifications. The mods will be aimed at increasing performance, reducing equipment costs, or any other changes mild or wild that guys would like to contribute.

Please keep it positive and show respect for others' work and contributions so that I don't have to exercise my god-like power to edit/delete unproductive content.

Thanks, Lee
Posted by Knife Liddle | Jan 08, 2014 @ 06:06 PM | 5,048 Views
I have what I think is one of the first few Fox motors built specifically for AMA Slow Rat Race.

You tell me what it is. What I can tell you is1)it was only test run at the factory 2)it is one of the first produced 3)it`s in mint original condition as shown by the photos.

If you are interested in owning it. Let me know what you think it`s worth.

Thanks, Lee
Posted by Knife Liddle | Apr 06, 2013 @ 10:11 AM | 6,601 Views
My first EDF was a 70mm Sniper back in the Fall of 2007. Since then I`ve built flown and crashed a bunch of jets. Some were scratch built original designs, a lot of them were ARFs, but most of them had major mods, very few were stock.

As much for myself as anything I decided to take the best pics and put them all in one place, so this is the place. I`ll add some descriptions with the pics and if there was a build thread on the model I`ll supply a link in case someone wants more info.

It will be a work in progress, but it will be pretty extensive in the near future.

Lee
Posted by Knife Liddle | Dec 09, 2012 @ 12:36 PM | 6,460 Views
The Holiday season is in full swing! For many old modlers, this means the quiet household is soon to be invaded by enerjetic grandkids. Many times, the weather is so bad that they are trapped indoors for days. Not a good combo.

Here`s a little nerf glider that may provide some relief, by giving them something to do. Maybe even do some competition to keep them busy. Distance, spot landing, ect.

PS, you should make a few for the adults too.

AUW is onli 1.7g and with no hard points or sharp edges it`s totaly safe for indoor use with no age limits
Posted by Knife Liddle | Sep 01, 2012 @ 05:18 PM | 6,955 Views
I`ve wondered for a while if you could reverse some of the etract units on the market. I`ve reversed the truion block in some air/air retracts for a custom fit for some situations, and it was no problem. This may seem obvious to some guys, and i always thought it would work, but had never sat down and done it.

So I decided to cut up a medium sized HK etract to see if it would work. Yep, it does. It`s pretty simple. You just have to remove the pivot axle, cut away some plastic and turn the truion block around. Works like a champ.

Most applications, the stock set up works fine. But if you run into a space issue, or a problem with the strut interfering with the etract motor housing, give it a try.

It will be nessesary to add some extra mounting tabs for the mounting plate. Or you could just glue the mounting plate in place and reinforce it some. They are less than $100 a piece so they are disposable.

It seems to me that with just a little effort, this feature could be added to most of the etracts on the market. Why not factory guys?
Posted by Knife Liddle | Oct 21, 2011 @ 10:58 AM | 8,747 Views
two pics
Posted by Knife Liddle | Aug 03, 2009 @ 02:22 AM | 10,494 Views
I wanted a fun EDF to fly every weekend. Almost RTF
Posted by Knife Liddle | Dec 01, 2008 @ 08:51 PM | 11,237 Views
I just got this delivered by UPS. The most unique thing about this trophy is that I flew all electric powered planes in every heat of 2007 to best all pilots, and they were burning old dinosaurs to power their planes. Electric is the future!!
Posted by Knife Liddle | Nov 27, 2008 @ 10:10 AM | 11,200 Views
my nomination for best cougar
Posted by Knife Liddle | Nov 24, 2008 @ 06:56 PM | 11,030 Views
neu 1515-2y motors
Posted by Knife Liddle | Jan 15, 2008 @ 11:21 PM | 13,607 Views
Here are a few shots of my launch Dolly. Still need to hook up a pushrod for the steering and paint it black.