The new Hausler 450 V3 Pro-Torque Tube RTF flybar helicopter is now available in Canada and at my Store on Ebay (Jet'sRCModels)

These V3 versions are like the Trex 450 Pro TT. Please do not confuse the V3 with the Hausler 450 V2 which are similar to the Trex 450 SE.

As well, my current stock of 450 V3 are equipped with the latest T7AH-2400 1transmitters that are conveniently programmed directly on the transmitter via LCD panel. No need to connect the transmitter to a PC to program your heli.

These T7AH transmitters have 12-model memory and suitable for both helis and fixed winger model aircraft. Please PM me with your email address and I will send you the T7AH operating manual in pdf.

FMS Models now available on Ebay. Please see my Ebay Store, Jet'sRCModels.

Available models: 1400mm P51B Dallas Darling and Shangrila, P51D Red Tail, Marie, Shangrila, Petie, Ferocious Frankie, Gunfighter, ZERO green, B-25 green, T28 red and white, FW190, P47 Tarheel Hall, Cessna 182, J3 Piper Cub

2300mm ASW28 and FOX gliders

900mm Red Dragonfly RTF Trainers

1100mm F6F and PT17

If you do not see the above listed, please send me a message using Ebay messaging.

The Skyartec Wasp X3V and X3S 250 class flybarless RC helicopters are now available in Canada. Please see my Ebay.ca Store, "JetsRCModels" for the listings. You can choose Ready to Fly or "Bind and Fly". Note that Skyartec Receivers will bind only to Skyartec Transmitters.

These WASPs are sleepers in the RC heli world. They are of high build quality and are capable of performance that will satisfy intermediate pilots yet inexpensive. They are great for beginners with at least 10 to 15 hours on a flight simulator because the Receiver/Gyro is push button switchable between beginner mode and normal mode.

These WASPs fly at least as good as their 250 class FBL competition.

Complete spare parts in stock for both these models. Please send me a PM if you want an X3V, X3S or parts.

I am liquidating all my FMS Stock at competitive prices, to concentrate on ROC HOBBY.

I prefer to deal with local hobby shops, so please ask your lhs to contact me, Jet Valmonte, at jet@valmonte.ca or 604 725 4073 to order..

If there are no hobby shops in your area that carry FMS or ROC HOBBY, you may order directly from me.

Current FMS stock includes the following in PNP and ARF versions:

1400mm P51B Dallas Darling and Shangrila, P51D Red Tail, Marie, Shangrila, Big Beautiful Doll, Petie, Ferocious Frankie, Gunfighter, ZERO green, B-25 green, T28 red and white, FW190, P47 Tarheel Hall, Cessna 182, J3 Piper Cub

2300mm ASW28 and FOX gliders

Red Dragonfly RTF Trainers

1100 F6F and PT17

BTW, 1400mm P51B and D are PNP and they can also be ordered with the motors, ESCs and servos un-installed. This is an experiment in PNP/ARF packaging to see if modelers like to assemble the parts for better quality control. The idea is for the buyer to: 1) be able to replace or upgrade electrics/electronics if they so wish; or 2) to be able to bench test the electronics/electrics before installation.

These same models are available in the conventional PNP versions as well, i.e. motor, ESC and servos installed.

ROC HOBBY models are now available in stock in Greater Vancouver, Fraser Valley and Kamloops, British Columbia.

See the popular high performance Critical Mass, V-tail Glider, MultiPurpose Glider, WACO Bipe and Beechcraft Bipe at RC Pit Stop in Langley, One Stop Hobbies in Abbotsford, Racetech Hobbies and GoGo Hobbies in Coquitlam and Interior Crafts and Hobbies in Kamloops.

I am looking to expand my distribution throughout Canada. If you wish your local hobby shop to carry ROC HOBBY models, please have them contact me, Jet Valmonte at jet@valmonte.ca or 604 725 4073.

If you want to buy ROC HOBBY models, and there is no hobby shop that carries ROC HOBBY in your area or province, you may contact me directly and I will ship to you.