New Products Flash Sale
jiggz's blog
Posted by jiggz | Jul 04, 2015 @ 03:51 PM | 837 Views
Well I finally decided it was time to convert my FMS 1400 p51b to RAF 133 polish squadron ..after dome debating on the thread I decided to go for Man Zumbach who was wing leader for a period of time ..

HB868 squadron code JZ server at a small local airfield RAF Brenzett about 45 minutes away from where I live

For the conversion I will be using a p51b/c Malcolm hood from an fms p51b snoots sniper

Tamiya grey undercoat was used for the base
Followed by tamiya xf-82 ocean great 2 (RAF)
And for the green I used tamiya xf-81 dark green 2 (RAF)...Continue Reading
Posted by jiggz | Apr 01, 2015 @ 03:51 PM | 4,245 Views
Hey all I finally got around to starting my royal navy scheme on my FMS hellcat

Got most of the paint stripped this evening
Posted by jiggz | Mar 29, 2015 @ 05:27 AM | 1,910 Views
I just started trying to give some of my vids more emotion

Visionaire like a hummingbird

P51b sail

Watermark tiggy

The ultimate durafly vampire movie

VISIONAIRE LIKE A HUMMINGBIRD (4 min 32 sec)


Enjoy..
P51b SAIL (3 min 49 sec)
...Continue Reading
Posted by jiggz | Mar 17, 2015 @ 05:47 AM | 2,793 Views
As an avid aviation enthusiast I collected.kits before rc
But there comes a. Time when.one must make way for the next and RC is my.future..all sold as bulk ...
Posted by jiggz | Feb 03, 2015 @ 05:28 AM | 3,350 Views
Had a fair few probs with dynam retracts and figured out a few strange fixes
Dynam retracts another unauthadox fix (1 min 41 sec)

Dynam retract unauthadox fix (0 min 42 sec)
...Continue Reading
Posted by jiggz | Jan 28, 2015 @ 04:39 PM | 3,079 Views
Had a blast at the weekend a friend brought his RC silvia to my flying field and I gotta say IWANT 1 I did a little filming and editing and the result came out pretty good
Rc drifting with Nissan Silvia (2 min 10 sec)

Posted by jiggz | Jan 03, 2015 @ 12:52 PM | 2,160 Views
there comes that time as a new flying year begins we reflect on the bad moments or the ones that made u go arrrggghh...

My quick compilation of some of this years ouch moment's
Rc plane mishaps and crashes compilation (4 min 36 sec)

Posted by jiggz | Nov 26, 2014 @ 08:22 AM | 3,329 Views
the Dynam tiggy is by far my fav bird to fly...on opening the box i could see that this was going to be a long term relationship

i started strait away with paint to bring her up to how i wanted her to look tamiya aluminium was used for the tank and cowl....rudder was painted with the raf insignia to set it all off

gear has been raked making this the single most easy bird to operate from grass

a xoar 12x5 woody prop was fitted for looks but made alot off differance with performance smoothing the power curve
a 2200 4s provides over 20 mins of mixed flying combined with the super effecient prop

i completed a full dash and dials with compasses fit out
and a super detailed pilot set it all off

amazing bipe to fly and if u dont own one go buy 1 today u will never look back

tiger moth sunset photo shoot part 1 of 2 (9 min 12 sec)


tiger moth sunset photo shoot part 2 of 2 (9 min 41 sec)
...Continue Reading
Posted by jiggz | Nov 22, 2014 @ 02:18 PM | 2,935 Views
I picked up the dynam spit from my local trusty model shop it had been hanging upside down for months
Then shop gave me a price I couldn't turn down
It had the spinner and prop adaptor missing....
A quick dig on the shelf produced a true dynam spinner and a dynam Texan adapter was sourced

I had a few personal issues with the spit in the fact there was several scale problems

No dihedral to the wings
Fuselage where it meets tailplane is to deep
Canopy bubble was not big enough
The rear canopy glass to big
Aerial to far back
Underwing radiator's wrong shape

The first thing to do was set about the repaint with tamiya flat earth and wooden deck tan for the trop camo


The vokes .filter was next and I used plastic card.to build.it up in box.form shaping a piece of.foam would have been time consuming
I ended up making 2 filters.to try and get a.close match

Gear rake fwd by 15 degrees
And slight foam removal

Canopy was cut open to try and hide the fact its the wrong shape...I did eventually correct the rear glazing
Motor magnets were incorporated into the open canopy so it could b used open or closed

With the vokes filter in place 10 grams was added to make her balance to my preference

The maiden
Dynam spitfire VB conversion maiden (3 min 59 sec)


The second flight with only 1 wheel deployed

Dynam spitfire trop 1 wheel landing (5 min 52 sec)
...Continue Reading
Posted by jiggz | Nov 12, 2014 @ 08:35 AM | 4,942 Views
i had to get one of these after seeing the great envelope for some scale details

as soon as i had it out of the box i set about painting the whole airframe in tamiya camel yellow

i switched the esc strait out for a40a century one as i planned to run on 4 cell and wanted to avoid that splutter from the stock detrum unit

i added robart scale at6 wheels which strait away gave the aircraft a nice ground look

mods include semi scale cockpit fit out
carved airiels
dummy radial
outboard flaps and inboard split flaps

dynam at6 harvard very low scale pass (0 min 17 sec)


dynam at6 harvard 4cell dead stick landing (4 min 52 sec)
...Continue Reading
Posted by jiggz | Nov 11, 2014 @ 04:44 PM | 4,630 Views
After owning the 109 for a while I decided it needed a scale makeover and a few mods...

I have made the slats operational via a wire control system
PARKZONE BF109 LEADING EDGE SLATS MODIFICATION BUILD AND VID (4 min 41 sec)


Next task was to complete a full split flap mod...the 109 handled very well with the stock flap setup and slow speed handling is great.....
With the split flaps its much better and floats around at very slow speeds with full authority
PARKZONE BF109 FULL SPLIT FLAPS BUILD & VID REVIEW (5 min 37 sec)
...Continue Reading
Posted by jiggz | Nov 11, 2014 @ 02:29 PM | 3,560 Views
Another must for the tempest is that enormous chin rad
I recreated it by using plastic card and cutting a 5mm oval from a pre made.template ....car dent.repair mesh was used for the cooling fins...
The centre piece was made from a jet nozzle.from a plastic static kit..

The wheels...something the tempest stands out with...I used j.Perkins wheels and cut.plastic card fillets to create the semi covered spokes..all had a coat of revell steel

Canopy edges trimmed to follow the natural line of the bubble..cockpit was painted with tamiya German grey to add a little depth..
Canopy glass was polished using windscreen stone chip repair finishing...Continue Reading
Posted by jiggz | Nov 11, 2014 @ 01:19 PM | 3,593 Views
The tempest from side profile looked naked without those big hanging inner doors
So I took up the challenge of making operational ones...

Dynam tempest sequenced inner gear door test (1 min 1 sec)


Dynam tempest gear sequence with inner doors (0 min 17 sec)
...Continue Reading