New Products Flash Sale
speedactyl's blog View Details
Posted by speedactyl | Jul 16, 2015 @ 05:11 AM | 1,987 Views
PX33 wing
material : XPO Foam
Motor :EmaxCF2212
Prop 7x6 or 8x3.8
Power: 2200mah 3s
AUW 650g-700g
WS 36"

the airframe is basically a foam sandwich of two hafts on a central frame structure. the foam is basicaly bend and strech over creating the airfoil shape. also its more durable than EPP foam .considering its AUW .

no carbon rod or any other support structure is needed since the foam can stand alone on its own with just glue.

20130804 090337 (0 min 45 sec)

for detail see:
Posted by speedactyl | May 06, 2015 @ 07:26 AM | 2,166 Views

Yes" as a challenge Last Weekend , can you make broken Props to fly again, and is it safe?
I accomplish the challange and flew the aircraft with a working Prop build from two splice other Broken Props it may not be as efficient as a new Prop but at 50% - 60% thrust loss its just enough to fly , no ACRO but Level cruising flight.
-----------------------------------------------------------------\ MacGyver \------------------------------------------------------------------------------
Note: as any RC hobbies knows there is a Trash bin in the flying field full of those stuff . they may not be fit for multirotor use but for fixwings they getaway with those
Posted by speedactyl | Apr 09, 2015 @ 05:09 AM | 3,370 Views
PX-37 Large Scale Ultralight 1/4
Wingspan- 2100mm
est weight 2KG-2.5KG
Motor 950KV X2 (not sure if this would deliver enough Thrust)

K this my First entry to the world of Giant RC
in IMAA rules min of 80" wing span so this could qualify as giant scale.

still in the Build process and not sure if it would fly....Continue Reading
Posted by speedactyl | Jan 03, 2015 @ 11:05 PM | 3,753 Views

Goldie Wilson III: [in TV Commercial] Hi friends, Goldie Wilson III for Wilson Hover Conversion Systems. You know, when my Grandpa was Mayor of Hill Valley, he had to worry about traffic problems. But now, you don't have to worry about traffic. I'll hover convert your old road car into a skyway flyer!

At Goldie Wilson Hover Conversion Systems we use certified Flying Circuits and top of the line Hoverwheels to transform even the most vertically challenged vehicles into Skyway Flyers.

...Continue Reading
Posted by speedactyl | Dec 23, 2014 @ 10:33 AM | 3,798 Views

the Projects
...Continue Reading
Posted by speedactyl | Nov 04, 2014 @ 10:01 PM | 4,128 Views
just like some notable camera plane
PX34 is as simple as it gets , 3ch

AUW 250g

on june 2014 the first prototype

light weight AP plane. first tested flying with some skysurfers

...Continue Reading
Posted by speedactyl | Sep 19, 2014 @ 11:30 PM | 3,841 Views
I tried different materials but EPP seems to stand out as the most presentable of all my builds.

if they are worthy for Aircraft Kits....Continue Reading
Posted by speedactyl | Sep 14, 2014 @ 01:44 AM | 3,769 Views
this was done back in Aug

started out as

Heli canopy

its use as an canopy with a conveniently battery access point up the front and air vents. not sure yet for 3d flying but the design have flown as scale.

Fixwing Aircraft

this is the kicker and the highlight of the action . and did several chases with other aircrafts in the field. Adequate performer in the air.despite being slightly underpowered.

...Continue Reading
Posted by speedactyl | Jun 09, 2014 @ 04:03 AM | 4,359 Views
Project Synersign (RC Aircraft Foam PHILIPPINES)

PS Foamboard (w/o paper )

yak55 rc philippines (1 min 28 sec)

Light and floaty

w/o paper Laminate, Depron like ,Plain White , Very light weight

EPP Foam


...Continue Reading
Posted by speedactyl | May 19, 2014 @ 02:59 AM | 10,135 Views
made these a few weeks ago , is it a good idea to use them as Cowling or Canopy for my RC aircraft?

Prototype model

this one is scaled a bit bigger to see how it looks

...Continue Reading
Posted by speedactyl | May 09, 2014 @ 03:40 AM | 5,464 Views

just like in real Air Crash investigation this model one of the early generations of Foamie planes unfortunately on April 26 ,14 it met its end when structural fatigue takes its toll in a spectacular mid air disintegration. reconstruction of this airframe shows its construction being EPS/PS type material typical used for models of that Era , the owner told me he had it for 6-7 years. and its a well care model.
discoloration of the wings shows its age. and this plane is build before carbonfiber is widely use in RC application so in the cross-section of the damage wing shows layered PS material with a outer coating as an shell.

so now we know how long EPS models should last. before its deem unfit to fly.
I doubt if its still capable of flight even on a lighter power setup, judging by how brittle the wing structure are.

Aircraft model: Christian eagle
Posted by speedactyl | Apr 20, 2014 @ 10:03 AM | 4,437 Views
would like to Celebrate this Holy Week/Easter With an RC Reference.
to some verses with some of Our RC model posing in the shots.

Psalm 23 The Lord is my shepherd; I shall not want.

He make me to lie down in green pastures: he lead me beside the still waters. He restore my soul: he lead me in the paths of righteousness for his name's sake. Yea, though I walk through the valley of the shadow of death, I will fear no evil: for thou art with me; thy rod and thy staff they comfort me.Thou prepare a table before me in the presence of mine enemies: thou anointest my head with oil; my cup runneth over. Surely goodness and mercy shall follow me all the days of my life: and I will dwell in the house of the Lord for ever.

PX22-A Speedactyl


But those who trust in the LORD will find new strength. They will soar high on wings like eagles. They will run and not grow weary. They will walk and not faint.

EPP Eagle
Posted by speedactyl | Apr 07, 2014 @ 11:39 PM | 5,442 Views

How to expertly pack your Car

RC stuffing clown car (9 min 56 sec)

Posted by speedactyl | Mar 29, 2014 @ 11:37 AM | 5,108 Views
Hi im PC
Hi im Mac

Who the Heck Are you...?

Posted by speedactyl | Feb 06, 2014 @ 10:02 AM | 5,870 Views
currently on a few projects this week

...Continue Reading
Posted by speedactyl | Jan 05, 2014 @ 07:50 AM | 4,898 Views
Posted by speedactyl | Apr 23, 2013 @ 02:21 AM | 6,993 Views

Crash resistance

easy cut bend & shapable

...Continue Reading
Posted by speedactyl | Apr 02, 2013 @ 01:04 AM | 6,231 Views
PX31 up in the skies again
PX31 (2 min 35 sec)

...Continue Reading
Posted by speedactyl | Feb 26, 2013 @ 04:49 AM | 5,884 Views
Flying Contortionist

since the release of that other material in the field
we been getting surprising result.

Before most of us do it this way





...Continue Reading