-
Views: 1024
SF Executive Jet from Hobby Lobby. -
Views: 814
Twin 66mm fans with 4000kv 26mm outrunners on 3 blade rotors, twin 30A controllers and 3s 4300 20C. 700W combined. -
Views: 859
FMS F-4 Phantom. -
Views: 843
68mm Wemo clone fan, HET 2W-20, 50A Super Simple ESC, 4S 2350 25C, 600W+ -
Views: 799
Great Planes XPD-8, HyperFlow fan, HXT 2435 4040kv, 3s 1300 20C, 240W
Comments (13)
Add Comment
-
Views: 787
My mid-weight Mark Grand Shredder. I wanted to build one that would fly in fairly light lift conditions, so I built this one; came out to 3lbs, 9.5oz. -
Views: 738
Team Shredder; my heavy Shredder is there in the background (5lbs). -
Views: 737
Finally built my Higgens Rodent. 67oz AUW. I built a ballast bay into the belly to accomodate up to 4lbs of ballast. -
Views: 708
Probably the ultimate PNF sled. -
Views: 756
Picked up this super rare 70's vintage Multiplex Akro from RCDad. It was practically ready to fly with servos installed. Has a unique pop-up canopy airbrake. I had been looking for one of these for around 3 years. -
Views: 720
Quite possibly the best value in an EPP 48" combat wing is the LEG Prairie Dog at $35!!! Haven't maidened it yet but all reports indicate that it is quite a performer also despite the very fair price. -
Views: 840
Got this little mutt from fellow sloper Droydx. He took an old Mark Allen Swift 400 fuselage and mated it to 3/4 of an Omei wing that had been destroyed. The result is the Swift-O. I redid the linkages, radio install, then freshened it up with new pain -
Views: 830
Currently on the work table is the brand new re-designed Fly Fly Salto. This is a glass fuse, wood winged 2.5M ARF that Nitroplanes sells for $99!!! How can you beat that? Can't wait to maiden it.
-
Views: 757
FlyFly F-86 Sabre at the flying field. These huge 90mm foam EDF's have got to be the ULTIMATE park flyers! 92mm stock fan, Quannum 1350kv motor, 100A Suppo ESC, 6S 4000mAh lipos. Pulls 1350W, 58A on a fresh pack. -
Views: 702
This is my Sky Hobby A-7E Corsair II EDF. What a sweet looking and flying jet! I've got an MPX Twister power set in this one; pulls 400W/35A on a fresh 3S 25C 2100 pack. -
Views: 675
I finally built one of my MPX TwinJets I picked up for $40 on closeout a while back. This one has 2 - 1700kv outrunners swinging APC 7x5E props. A combined 700W for vertical performance accelerating all the way! -
Views: 717
Business end of the TwinJet. -
Views: 676
Yet to be maidened Funjet. I've got this one setup with an Align 430L 2250KV motor, 50A Suppo ESC, and 4S 25C 2250 lipo using APC 6x5.5E prop. Wattmeter shows 580W/39A. I don't think the motor will last very long. -
Views: 662
My Eflite P-47. Had this for awhile and what a sweet little warbird it is; too bad they discontinued this model. KDA 22-20L swinging APC 10x7E on 3S 2200 for nice and scale like performance. -
Views: 710
Cermark Victor mini warmliner. KDA 22-20L swinging Graupner CAM 10x8 for 350W. Nice little warmliner and easy on the pocket book.
-
Views: 1038
A rare Mark Grand Thermal Phaze. 60" HLG w/wingerons. This was Mark's plane before I got ahold of it. -
Views: 892
The new Windrider Fox. 66" scale molded EPP. Very nice flying and high quality kit. -
Views: 1064
Windrider Fox. -
Views: 839
Multiplex Twister EDF. This is my first EDF plane. -
Views: 848
I set up the Twister for 4SA123 power. -
Views: 776
Got this 50" (,30 size) Tiger Moth ARF on Ebay for a little over $100! Uses a TowerPro BM2915-5Y on 3S 4000mah swinging an APC 13x7E. -
Views: 767
More Tigermoth. -
Views: 836
Haifong Spitfire. 20 size, 48" span.
-
Views: 888
Multiplex TwinStar II -
Views: 849
Yes, I like MPX foamies! -
Views: 900
Pekar Albatros. 2.6M fully molded fiberglass/carbon. RG-15 airfoil. -
Views: 820
Albatros at Grass Mountain. -
Views: 810
Albatros at Grass Mountain. -
Views: 817
Wing Warrior Ridge Runner. -
Views: 817
Foamie wings: (from back to front) Wing Warrior Ridge Runner, Windrider Bat, Wild Wing -
Views: 808
Foamie wings.
-
Views: 1476
FVK Azart. 2.8M fully molded fiberglass/carbon, RG-15 airfoil -
Views: 921
Azart on final w/crow deployed -
Views: 908
Definitely one of my more ambitious color schemes. -
Views: 848
AstroFlight Californian. 111" R/E, built-up wings and tail surfaces, polypropylene molded fuselage.This one is over 25 years old; been refurbished several times. Pic taken after latest refurb. -
Views: 866
Baudis Cohen. 2.9M fully molded fiberglass/carbon. MH-32 airfoil. -
Views: 861
Another shot of Cohen. -
Views: 884
Bob Martin Coyote. 72" vintage sloper with "indestructible" Duralene fuselage. Bought this one already built but didn't like it. Did a full refurb and modified trailing edge to replace smallish 1.25" ailerons with 2" stock -
Views: 889
Coyote on maiden flight at Grass Mountain, CA.