RC Groups - Cars - Cars and Parts (FS/W)

For Sale 1/16 E-Revo VXL - EVERYTHING YOU NEED [NEW PICS]- $200-225$

xelaxor — Tue, 24 Nov 2009 16:11:37 GMT

All info below. I only accept PayPal, and item will be shipped once funds clear.

This is absolutly everything you need to get driving.

-Remote
-2 Traxxas 1200 MAH nimh batteries
-Self Made Series connector
-Wrench
-Bag Bottom left is a steering arm set
-35+ Body clips
-1 upper and lower A arm
-Stock Receiver which had a problem with it. Called traxxas and they sent me a brand new one, which is installed in the car. You can have the faulty one with the purchase, maybe you can fix it.
-Rims (perfect for drifting in rain. They fit right on. Video below of them in action.
-The Car itself. VXL Waterproof Brushless system
-Body [cut out windshield, and back for ventilation; led mounting holes are the silver caps on the front of the body, and rear
-Onyx 220 NiMh Charger with traxxas connector, charges each battery in an hour.
-Original box, everything that will fit (Like NIB) will be put into box.
-Stock pinion gear is in the pic too, forgot to mention.

The car could use some new bumbers, Wing, Skid Plates, new body perhaps; That's one of the reasons Im selling so cheap. This car is ready for some LED's too. I modded the car to accept LEDS from Rc Lighthouse on Ebay. The extra servo spot on the car was cut out a little wider to accept a 9V battery for the lights. There are also little chrome housings on the body for the led's to slide into and attach firmly.

Few videos of it.. The car has been very very well taken care of. Minor scrapes on the wing, and bottom. Just happens. Car has been in the rain and proven water proof. After runs in the rain the car was dried with an air compressor, followed by a towell. 1 collosion; clipped trash can and broke the A arm and a steering connector, hence the extra parts. Yes, the car was fixed completely, and he videos are after the collision, just incase you're wondering. Car runs like absolute new.

The white rims in the rain:

E-Revo VXL Drifting in Rain (5 min 39 sec)

Rain with normal tires, just playing around:

1/16 E-Revo VXL - Fun in the Rain! (4 min 55 sec)

I'm looking at around 200-225$ for everything. The car alone was $313, charger was $70, lights $10, battery $25, parts/misc $25

Thanks a bunch

Alex

For Sale Great rtr traxxas nitro stampede hopped up first $110.00 takes it!! Nj

reptileman — Tue, 24 Nov 2009 15:47:01 GMT

FIRST $110.00 LOCAL PICK UP IN NJ TAKES IT!!
100% working order with rc10GT pipe large cooling head and aluminum front C carriers and a fail safe unit all aluminum shocks selling as i am getting out of nitro only keeping my 1/8th buggy ...been into RC for over 25 years and know all about nitro and RC's the truck still works perfectly I am the original owner have manual also .. Just needs rear body post mount.

THANKS

Wanted Tactic 2.4Ghz Receiver wanted

Probedude — Tue, 24 Nov 2009 06:34:21 GMT

Looking for an inexpensive Tactic TR-324 2.4Ghz receiver.
With MAP everyone is charging $24.99 including shipping.

Anyone upgrade away from Tactic or have a spare Tactic 2.4Ghz receiver you'd like to sell?

Dave

Wanted wtb jconcepts BJ4

MichaelConnally — Mon, 23 Nov 2009 21:15:02 GMT

I'm looking for a BJ4. roller or rtr.

Thanks,
Mike

For Sale Traxxas 1/16th E revo VxL With a ton of extras $275

justpassedu — Mon, 23 Nov 2009 17:57:17 GMT

$275 with no Batterie's
$370 For everything
Traxxas 1/16th E Revo VxL with Many Extra's , This truck has very little run time and has been very well taken care of. It is in Mint condition and please buy with confidence as my feedback is 100% positive on several other forums and i can show you if youd like . Only thing you will need to get it running is your own radio and receiver. Original Box and Instructions Included. What you will get with it thats extra is -

-Two Traxxas Power Cell Nimh Packs with about 10 cycles each
- One Brand New Never Used FlightMax 2200mah 2s 20c Lipo Pack
- One Rhino 1550Mah 2s 25c Lipo Pack
- One Rhino with one cycle 1550mah 3s 30c Lipp Pack
- Hot Racing Front & Rear Aluminum Rocker Arms , Rear Not installed yet
- Hot Racing Aluminum Wheelie Bar
- One Brand New Traxxas Carbon Fiber Wing and Stock one Included
- Losi Lst Wheels and Adapters , stock wheels included aswell
- One Set of Spair Shocks
- Brand New Optional Pinion
- A bag of spare Parts

***Paypal is wurydaz@aol.com Best way to get in touch with me is via email at wurydaz@aol.com , No Trades Please ****

For Sale Baja Pipes f/s

Timmahh — Mon, 23 Nov 2009 15:17:39 GMT

Have a few pipes im selling.

1st is a Jet Pro Dual Bleed Side mount. used.

pipe was new when installed on my Hooters Baja. good pipe, still in 9.5/10 condiion. great topend, and can gain a bit more low end with the mid port open as well. has 2 very very small dents in the center belly section on top, but you can barely see them.

115.00 shipped in the US

next is a Jet Pro V4 Track pipe. Great pipe for those running on a race track. solid but controllable lows, strong mid, ok high end. has a decent dent at the end of the header section. doesnt effect performance at all. otherwise a clean pipe i would rate at 8.5/10 condition. 10/10 if not for the dent in it.
80.00 shipped in the US

last is a TGN Race Pipe. this was one of the very first TGN Race Pipes sold, and very well may be the very first one sold. its been around the block a few times but is still a ripping pipe. the header section took a tweek, i have it almost back in place, but never totally straightened it out. im sure a bit of heat could put it back in proper place, or a new header could be had from TGN possibly. the Green is a Krylon 1200* high temp paint.

80.00 shipped in the US

PM me for PayPal info. the history of these pipes are clearly layed out here on HBF. just look thru my old posts for info on them.
Tim

Off Site FS Airtronics MX3 FM Pistol Grip w/5 Rxs

K.R.Joye — Mon, 23 Nov 2009 14:44:25 GMT

Auction ends Sunday, heck of a deal!

http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

For Sale Traxxas 2.5 4 tec RTR complete package. 150.00 shipped

jakcharles — Mon, 23 Nov 2009 07:15:32 GMT

I have a traxxas 2.5 in great condition with front and rear sway bars. new tires and rims mounted on a subaru Imperza body. Has a Jr Racing XS3 Tx and Rx in great condition. Also comes with new in package Traxxas rear belts 2, Middle belts 2, and Front drive belts 2 all NIB. Also come with the Traxxas radio Tx and EZ starter. yet. I am also selling another set of HPI rims and tires not even glued. This car has been broken in by the book and is adult owned. I just dont have the room to enjoy it and I have graduated to Airplanes. I am selling this as a complete package and will not sell seperately. Price is firm at 150.00 shipped and paypal only please. US shipping only.

Attached Thumbnails

73.5 KB · Views: N/A

101.7 KB · Views: N/A

74.5 KB · Views: N/A

85.9 KB · Views: N/A

113.8 KB · Views: N/A

93.3 KB · Views: N/A

For Sale Acme .18 engine pullstart $25

hydro30 — Mon, 23 Nov 2009 04:20:48 GMT

Engine is like new less than a gallon of gas through it stripped truck for steel dogbones when the a arm broke and never got put back together.Has engine mount on it and header.

Attached Images

For Sale Associated RC10 NTC3

mab1236 — Mon, 23 Nov 2009 04:19:08 GMT

I have a used NTC3 that I am selling because I have gotten into Helis. This car is very fast and the engine runs very strong. I replaced the tires with some hard foam tires that grip a lot better. Although you are easily able to drift this car also. Looking for 150 shipped or best offer or I might trade for the right helicopter. shoot me an email: mab1236@juno.com

Attached Thumbnails

23.5 KB · Views: N/A

Attached Images

For Sale Hpi rs4 ii

pferg — Mon, 23 Nov 2009 01:08:28 GMT

This is an HPI RS4 2 that I bought new when it first came out. I have done numerous upgrades such as carbon fiber top frame, 2-speed auto transmision, front belt tensioner, adjustable turnbuckles,and new springs. The engine is a HPI Nitro Star.15. This engine has not been run in some time but it ran great last time it was. The steering servo is a stock HPI servo and the reciever is an HPI 27 MHz reciever. I will include the HPI 2-channel pistol grip radio. Feel free to make me an offer!!

Attached Thumbnails

135.8 KB · Views: N/A

97.5 KB · Views: N/A

50.9 KB · Views: N/A

133.6 KB · Views: N/A

110.9 KB · Views: N/A

For Sale Losi 1/18 Mini Slider Roller FS Cheap!

fastmax — Mon, 23 Nov 2009 00:37:06 GMT

I have a Losi mini Slider for sale. It is a roller with servo. No other elecs are included. $60 shipped USPS priority mail with delivery confirmation.

Sold Two 7 cell hump 3000mah NiMH batteries for sale!

UAV_PILOT — Sun, 22 Nov 2009 06:43:05 GMT

I got two 7 cell 8.4v 3000mah batteries for sale. I used them on my Stampede. Both are in good condition and have about 15 charge cycles on them. Both have Traxxas plugs. $40 shipped for both.

For Sale New Glow plugs

patternpilot1 — Sun, 22 Nov 2009 01:55:34 GMT

QTY 5 (2) per pack MC9 dyn2509 $ 8.00 per pack

QTY1 OS R5 $ 4.75 each

QTY 1 OS P3 $ 5.75 each

QTY 2 OS P6 $ 7.00 each

QTY 1 OS P7 $ 7.00 each

QTY 2 OS P8 $ 7.00 each

shipping $ 1.25 cont US

paypal accepted

Off Site Traxxas velineon motor on ebay

abletowinginc — Sat, 21 Nov 2009 23:55:51 GMT

Under user name treasurechestpawn $39 plus free shipping takeoff of a stampede after one pack ran through like new

For Sale Nitro 4-tec parts

hydro30 — Sat, 21 Nov 2009 22:18:31 GMT

I have a pile of used parts for nitro 4-tec All but the chassis itself and axles and belts.I had took the 2.5 off for a rustler and it sat around tore apart for a while now. there is differential gears and the shift hub and housing brand new in package I beleive they are 20.00 bucks or so new.all these parts are barely used I did not run it much which is why the motor got put on rustler if someone wants to make me an offer.thanks.

For Sale Jato 3.3 lots of new parts and extras

hydro30 — Sat, 21 Nov 2009 22:09:46 GMT

I have a jato 3.3 for sale ready to run.Brand new axles,axle carriers,bearings,all 2 speed components and bearings new,tie rods,red anodized steering rods,steering servo,battery holde box, battery holder,on/off switch,3ch receiver and transmitter.Extra new in package spindles,steering blocks,roll hoop,front bumper,rear bumper,and single speed conversion(used).I will also include a rechargable glow igniter and charger.Im asking 250.00 O.B.O If someone wants it without the radio 200.00 O.B.O

Sold brushless 18t

TRAXXAS DEMO — Sat, 21 Nov 2009 22:02:41 GMT

i have an brushless 18t for sale. every little peice is aluminum. the reason i am reposting this is because my pics are up $250 OBO or trade

i will seperate the package, Please do not report post for over advertising please :D

GONE

Attached Thumbnails

65.4 KB · Views: N/A

34.2 KB · Views: N/A

48.1 KB · Views: N/A

38.0 KB · Views: N/A

39.3 KB · Views: N/A

44.3 KB · Views: N/A

40.0 KB · Views: N/A

49.0 KB · Views: N/A

46.3 KB · Views: N/A

45.3 KB · Views: N/A

45.2 KB · Views: N/A

42.8 KB · Views: N/A

49.7 KB · Views: N/A

45.0 KB · Views: N/A

37.1 KB · Views: N/A

45.2 KB · Views: N/A

56.1 KB · Views: N/A

38.4 KB · Views: N/A

43.0 KB · Views: N/A

42.1 KB · Views: N/A

34.7 KB · Views: N/A

33.4 KB · Views: N/A

80.1 KB · Views: N/A

36.2 KB · Views: N/A

33.4 KB · Views: N/A

38.2 KB · Views: N/A

32.0 KB · Views: N/A

35.9 KB · Views: N/A

36.4 KB · Views: N/A

For Sale VINTAGE Bolink Legend Car CHEAP!!

Rerun_40 — Sat, 21 Nov 2009 17:21:13 GMT

I have a Bolink Legend car that I have no use for what so ever.I got out of the hobby and this is all that is left. It is complete with body which is rough but can be used no dought,it has a JR servo in it for the steering which I think is a metal gear not sure. It also has a GM V4 ESC,and a Trinity Legends race motor in it. I know the motor and sevos works but I'm not real sure about the speed controller.It has been a while since it has been run. The chassie to this car is like new and it has silicone covered foam tires on it. Like I said I have no use for it so I need to sale it. I'm asking $60.00 shipped for it all.I need it gone so I'm willing to deal. Contact me here or feel free to mail me at rerun_40@hotmail.com Thanks guys.

Attached Thumbnails

75.4 KB · Views: N/A

63.6 KB · Views: N/A

73.9 KB · Views: N/A

52.8 KB · Views: N/A

63.1 KB · Views: N/A

79.9 KB · Views: N/A

Wanted WANTED Crawler or Truck/Drift

Rotor spin — Sat, 21 Nov 2009 05:15:22 GMT

have the fallowing for sale or trade

Wish list

Slash Electronics

Slash Parts & Upgrades

Slash Brush less ESC $ motor

Crawler

Drift car or Parts

For Sale or trade Item

TREX SE V2 or V3 NIB with all electronics Servo HS 65HB/S9650 DIG Futaba 401 new BEC

Also 2 new unused thunder power 2100 15c/24c Dean install at thunder power facility

Eclips 7 remote QPCM with Syntiziser

Scale Body BELL 222

Clear New Canopy

Spare Parts

All NEW except For Servo and remote

XXX-S RTR with or without Electronics

MS Hornet X-3D $175 kit with metal upgrade/Carbon Blade Exellent condition

or

MS Hornet X-3D $245 everything new Futaba Gyro 201/Brush less MOT/ESC

MS Hornet X-FP NEW $50 UPGRADE to some Ikarus part Metal Swash 2 set of new Carbon blades

MS Hornet Original NIB $30

Blade CX Battle tested new motors,Metal shaft, remote, charger battery $70

Sold Kyosho ZX-5 SP 4wd Roller with tons of parts

notez2beat — Fri, 20 Nov 2009 01:13:13 GMT

Earlier today I sold a basic ZX-5 roller and had lots of interest in it. After thinking it over I decided to go ahead and sale my other one along with the parts I accumulated for it. I have to admit, besides running it on lap around my garage, I have never used it. It has sat on a shelf for many months now. I had the greatest of intentions for it which is why there are so many parts and I had an entire spare car of the same make. I have decided to part with it and let someone actually race it. I do not know much about it in all honesty. I bought it used and really liked what I read about them. It appears to have lots of hopups parts on it like aluminum and such. There is a swaybar in the rear and what looks like nice shocks. As you can see in the pictures, the parts I am selling with it are more than enough to keep you racing for a while. Going through the parts will be a chore because they are all jumbled up together, which is how they came. I tried to seperate some of them for the pictures but I don't even know what all I have for it. There are tons of shock springs, 2 diffs (used), tons of arms, braces, towers, you name it, it is there. The pictures show all that comes with it. I have never taken it apart or worked on it so I do not know what condition the gears or diffs or any of that is in. I am selling it as is.

I am asking $295 for the roller and all the parts, shipped in the US. I am not looking to trade and my price is pretty firm. I think you will be happy with everything you get for that price.

For Sale Spektrum DX2 with 2 Rec & 2 Servos

notez2beat — Fri, 20 Nov 2009 00:55:00 GMT

Spektrum DX2 w/2 Rec and 2 Servos

I am selling a Spektrum DX2.0 with all the extras, including 2 servos and 2 receivers. This transmitter is capable of controlling 2 models so you will have a servo and receiver for each one. It is the perfect set up. It has hardly been used. I think there may be 2 small blemishes on it. I have never had to change the batteries because it was never used enough (which are not included by the way). In fact the plastic film is still on the screen.

I am asking $165 shipped in the US. My price on this is firm. Thanks for looking.

For Sale all aluminum bl 18t

TRAXXAS DEMO — Thu, 19 Nov 2009 23:46:02 GMT

i have an all aluminum ( every litle piece is) for sale but would rather trade. The pics in the link below are from the guy i got it from dont be scared im just to lazy to take my own. LOL everything is excatly the same but there is no esc and only 1 motor i have the other but my put it with the lot to. i will seperate anything u see :D http://www.rcgroups.com/forums/showthread.php?t=1128582

MAKE AN OFFER OR TRADE

Sold F/s bolink

murphy3428 — Thu, 19 Nov 2009 19:41:04 GMT

Included is a vintage bolink project the frame is a new legends frame i believe the body is mint and the new see's aluminum wheels look great on this car.you will need all electronics to complete this roller this is in mint condition $199.99 shipped

Attached Thumbnails

67.7 KB · Views: N/A

56.7 KB · Views: N/A

66.6 KB · Views: N/A

132.9 KB · Views: N/A

76.1 KB · Views: N/A

For Sale Traxxas Rustler VXL Brushless - Many Upgrades!!

Rare Bear — Thu, 19 Nov 2009 05:01:58 GMT

Selling my Traxxas Rustler VXL Brushless that has very little use - probably around 15 to 20 packs at the most. I just picked up a pricey SC8e, and need to pay some bills!

For anyone who hasn't seen this truck run - IT'S NUTS. On 2S LiPo (7.4V), it will pull wheelie's all day long w/ great power and control. For the more daring (aka crazy), 3S LiPo (11.1v) will power wheelie at 40+ m.p.h. and blow the tires off the wheels under full power. This truck is a monster w/ tons of power, and on 3S, it is nearly uncontrollable - which makes it so fun! :)

Upgrades are listed below, but I've basically installed (minus the caster blocks shown) every CNC aluminum upgrade Traxxas has to offer. Not only does it look better, it's stronger, which helps w/ a truck that has this much power.

Truck has no damage (body is in fair condition), and has never been crashed hard - aka, as in fast speed into solid object. :) What you see is what you get - truck is in excellent condition!

Rustler Link: BATTERY NOT INCLUDED WITH THIS PURCHASE!
http://www.horizonhobby.com/Products...ProdID=TRA3708

What's In The Box:

(1) Traxxas Rustler
(1) 27mhz Traxxas Transmitter (8 AA batteries needed)
(1) New In Bag Front Tires
(1) New In Box Traxxas CNC Caster Blocks (Never had chance to install)
(1) Miscellaneous parts bag - will try to find instructions

What Do I Need To Buy To Make It Run?:

(1) 2S (7.4V LiPo) or 3S (11.1V LiPo) or a 6 or 7 Cell NimH Battery (Be Sure To Check Battery Dimensions for Fit)
(1) Battery Charger
(8) AA Batteries for Transmitter

Upgrades: $256.45 In Upgrades Installed On Truck/Included - List Below

Shocks XX-Long Big Bore:
http://www.horizonhobby.com/Products...ProdID=TRA2662

Shocks Long Big Bore, Hard Anodized:
http://www.horizonhobby.com/Products...ProdID=TRA2660

Alum. Caster Blocks 30 Deg, Red (Lft&Rt):
http://www.horizonhobby.com/Products...rodID=TRA3632X

Aluminum Steering Blocks(2),Red w/Ball Bearings:
http://www.horizonhobby.com/Products...rodID=TRA3636X

Alum Stub Axle Carriers, Red (4):
http://www.horizonhobby.com/Products...rodID=TRA3652X

Wheelie Bar Assembly:
http://www.horizonhobby.com/Products...ProdID=TRA3678

Alum Turnbuckle Camber Link Set (4), Red:
http://www.horizonhobby.com/Products...rodID=TRA3741X

Alum Steering Bell Cranks,Red(4):
http://www.horizonhobby.com/Products...rodID=TRA3743X

Drive Yokes, Hardend Steel:
http://www.horizonhobby.com/Products...rodID=TRA4628X

Springs, U.Shock, Red:
http://www.horizonhobby.com/Products...ProdID=TRA4957

Alum. Wheels, Red (2) Rubber Tires:
http://www.horizonhobby.com/Products...ProdID=TRA5186

Brand New/Never Ran/Just Installed Wheels & Tires:

All Star Black - Rear:
http://www.horizonhobby.com/Products...rodID=TRA3770A

All Star Black - Front:
http://www.horizonhobby.com/Products...rodID=TRA3771A

Total Investment in Vehicle is Over $500.00!

Price: $250.00 Shipped via UPS Ground w/ Tracking (Professional Packing/Insured) - No Trades, Please/USA Only

Payment: Paypal, Please - For those using Paypal w/ CC, please add 2.9% for fees; if you're using paypal funds or drawing from your bank account, you're free & clear!

Please PM me for details, as I will not check this thread daily. Thank you!!

God bless - "Rare"

Attached Thumbnails

131.5 KB · Views: N/A

115.6 KB · Views: N/A

113.8 KB · Views: N/A

120.5 KB · Views: N/A

120.1 KB · Views: N/A

94.0 KB · Views: N/A

74.5 KB · Views: N/A

91.3 KB · Views: N/A

96.3 KB · Views: N/A

69.2 KB · Views: N/A

118.6 KB · Views: N/A

123.1 KB · Views: N/A

115.4 KB · Views: N/A

131.0 KB · Views: N/A

132.2 KB · Views: N/A

117.2 KB · Views: N/A

114.6 KB · Views: N/A

122.9 KB · Views: N/A

127.2 KB · Views: N/A

134.7 KB · Views: N/A

84.6 KB · Views: N/A

91.7 KB · Views: N/A

82.8 KB · Views: N/A

99.1 KB · Views: N/A

91.4 KB · Views: N/A

60.6 KB · Views: N/A

126.5 KB · Views: N/A

87.1 KB · Views: N/A

88.2 KB · Views: N/A

For Sale FS/T RTR Jato 2.5

pinball — Thu, 19 Nov 2009 00:25:43 GMT

Up for sale today is a RTR Jato 2.5. Has Hitech Hitorque metal gear servo, Lunsford Ti turnbuckles (one is installed four are in bag, one of them is missing but I am in the process of cleaning my shop, so if it turns up I'll send it to who ever buys it) Has the typical chassis scratches and the passenger side of the rollbar is broke off. It has the red stock body, it's a little beat up and I forgot to get a pic of it. Can get pics of body if needed/ Other then that it is in good shape. The motor has about half to three-quarters of a gallon run through and has had after-run oil used whenever it was stored for more then a week.

I am asking 260 obo plus shipping for it with your choice of front tires. The tires not on the truck are new I just don't have bearings for them.

I will consider trades let me know what you got. Looking for 1/10th or 1/8th scale brushless gear; ESC and motors mainly. Looking for a 100+ amp plane ESC for an LST2 conversion to BL.

For Sale Losi XXX-CR Buggy Wheel Sets

SRM — Wed, 18 Nov 2009 23:31:42 GMT

I have the following Losi XXX-CR wheels to sell. Looking for $35 for all the tires and rims shown plus postage. Selling everything as a package deal only.

Wanted 1/12 scale on-road items needed +++++

Jim Frahm — Wed, 18 Nov 2009 20:45:32 GMT

I have a AE 12R5.1 roller and I'm looking for new foam tires, bodies, 1 cell lipos, personal transponders, Futaba RX for 2.4 3PKS, pit tools, etc.

So, what you got?

I have a partially built, never run Venom 2.2 Creeper that I'm willing to trade.

Thanks,
Jim

For Sale B4

oklaposse — Wed, 18 Nov 2009 13:35:17 GMT

delete

For Sale f/s or trade tamiya TT01

240zron — Wed, 18 Nov 2009 05:02:34 GMT

I have a Tamiya TT-01 on road car for drifting or road racing. Comes with one set of street tires and rims and a set of drifting tires and rims. Has a new Saleen body. Car runs and drives great. Looking to trade for an 1/18th scale on or off road truck or car or slash. For more information and pictures please email me.
$130.00 or trade + shipping
paypal preferred
Thanks,

http://picasaweb.google.com/ronpotts/TamiyaTT01#