I started out with some foam and traced it out to look like a Jart.I used the bandsaw to cut it out thrn i cut it down the middle to make two halves.

Pic010.jpg - 87.0 KB - Views: 241
Posted by: Wake Turbulence on Feb 08, 2009 09:43 PM
I started out with some foam and traced it out to look like a Jart.I used the bandsaw to cut it out thrn i cut it down the middle to make two halves.
 
Pic010.jpg
*
Pic011.jpg
I routered out for the wires, servos, pushrods, receiver and battery.
>
Pic012.jpg
Two halves waiting for pushrod tubes.
>>

« Previous 5 Attachments | Next 5 Attachments »