R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Vendors > Millennium R/C > X-Gear Build > X-Gear Build
Reload this Page Attachment DSC02000.jpg (showing 1 of total 57)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

Items needed for X-Gear assembly. Close nip cutters are not shown but are needed.

DSC02000.jpg - 89.5 KB - Views: 577
Posted by: jkarpy on Feb 04, 2008 07:42 PM
Items needed for X-Gear assembly. Close nip cutters are not shown but are needed.
 
DSC02000.jpg
*
 DSC02004.jpg
Left and Right bottom strut:
>
 		DSC02009.jpg
With fine grit, sand paper, rough up the surfaces to be glued.
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.