The inside of my Futaba T7C and the 2.4Ghz RF module in the center. Notice that I have cut the 3 wires (red,brown,black). You ONLY have to cut the brown wire, if you want to turn off transmitting on 2.4Ghz !

DSC_3260.jpg - 303.8 KB - Views: 253
Posted by: SpookiePower on Apr 28, 2011 06:21 AM
The inside of my Futaba T7C and the 2.4Ghz RF module in the center. Notice that I have cut the 3 wires (red,brown,black). You ONLY have to cut the brown wire, if you want to turn off transmitting on 2.4Ghz !
 
DSC_3260.jpg
*
DSC_3261ppm.jpg
The blue wires, is what you have to look for, if you want to find the right place to connect your LRS - showed with test in red. The green text is about the 2.4Ghz module.
>
DSC_3266ppm.jpg
The backside of the 2.4Ghz module. This is where I did solder the 3 wires from the Scherrer LRS Tx.
>>

« Previous 5 Attachments | Next 5 Attachments »