R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Boats > Scale Boats > Polar 8 Project - Canadian Coast Guard Icebreaker > Polar 8 Project - Canadian Coast Guard Icebreaker
Reload this Page Attachment 2.jpg (showing 1 of total 104)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

initial framing and keel cut out. 1/4" plywood,

2.jpg - 59.8 KB - Views: 187
Posted by: Guard-Officer on Feb 21, 2009 10:12 AM
initial framing and keel cut out. 1/4" plywood,
 
2.jpg
*
 5.jpg
clamping and glueing framing together. keel is three layers of 1/4 ply laminated together and 1 1/2" deep. Built it robust.
>
 		6.jpg
5'6" long, or 1.67m long, pop can for scale reference
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.