Attachment browser: rocket_cowl.jpg

RCCars

Crack Roll

Flying Giants

		RC Groups > Article Archive > RCPowermag Archive > Horizon Hobby's Hangar 9 Brand Harmon Rocket RV-6 .46 ARF w/ EVO 46 Review > Horizon Hobby's Seagull Brand Harmon Rocket RV-6 .46 ARF w/ EVO 46 Review
Attachment rocket_cowl.jpg (showing 10 of total 53)

The only major difficulty I experienced during the assembly was modifying the cowl. Since the Evolution .46 muffler was bolted on from the top of the engine, a large portion of the underside of the cowl needed to be cut away to allow the the muffler to cl

rocket_cowl.jpg - 161.2 KB - Views: 369
Posted by: dawnron1 on Jul 19, 2006 06:47 AM

Again, 30 minute epoxy was used during installation of the rudder and elevator. All the control surfaces used CA hinges, which were easily installed with t-pins and thin CA glue.

The great looking Evolution .46 2-stroke was easily installed using the stock motor mounts and bolts. I would highly recommend installing a remote fueler in the cowl also.

The last step in the assembly was to apply the decals. The completed Harmon Rocket was a beautiful model, and was a big hit at my club field!

« Previous 5 Attachments | Next 5 Attachments »