|
RCCars | |
Crack Roll | |
Flying Giants | |
RC Power | |
The E Zone | |
Lift Zone | |
Our Sponsors | |
|
|
|||||||||||||||
|
||||||||
|
Article Thumbnail
<<
|
The Rocket is an ARF in the truest sense. It came with everything needed to complete the assembly, including a spinner, a nice set of decals, even a pre-painted and pre-installed pilot!
<
|
*
|
I used 30 minute epoxy to assemble the hardwood spar and wing halves. To achieve proper alignment of the wing, I recommend a second set of hands during this step. Also, I kept lots of paper towels and a bottle of isopropyl alcohol handy for removing the e
>
|
I needed to cut holes in the covering and then iron back the excess so I could install the rudder and elevator servos. Also, 12" extensions were used for the elevator and rudder servos. To ensure the connections wouldn't come loose, we used ordinary denta
>>
|
