R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Article Archive > RCPowermag Archive > Horizon Hobby's Hangar 9 Showtime 3D ARF Review > Horizon Hobby's Hangar 9 Showtime 4D ARF Review
Reload this Page Attachment 18.jpg (showing 9 of total 47)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

I secured the servo extensions together to avoid any possible disconnection in flight.

18.jpg - 67.6 KB - Views: 257
Posted by: Steve H. on Jul 19, 2006 06:47 AM
I secured the servo extensions together to avoid any possible disconnection in flight.
 
6.jpg
I used Hangar 9 Aluminum servo arms, with the ball links to the bottom.
<<
 		7.jpg
Aileron control horn -- the included linkages were just the right length!
<
 		18.jpg
*
 8.jpg
I double-checked the wing-to-fuse -- and found perfect alignment.
>
 		9.jpg
This hole is pre-drilled in the joiner tube where the retaining bolt goes.
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.