R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Article Archive > RCPowermag Archive > Horizon Hobby's Hangar 9 Showtime 3D ARF Review > Horizon Hobby's Hangar 9 Showtime 4D ARF Review
Reload this Page Attachment 2.jpg (showing 3 of total 47)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

The manual recommended drilling a hole in teh middle of each hinge slot to aid CA wicking. Nice touch! I also chose to seal my hinge gaps for even more security.

2.jpg - 15.4 KB - Views: 286
Posted by: Steve H. on Jul 19, 2006 06:47 AM
The manual recommended drilling a hole in teh middle of each hinge slot to aid CA wicking. Nice touch! I also chose to seal my hinge gaps for even more security.
 
showtime.jpg
<<
 		1.jpg
The box came packed very well and there was no shipping damage.
<
 		2.jpg
*
 3.jpg
This is one very lightly built wing!
>
 		4.jpg
Control horn installed -- I chose to add a locknut. (See text.)
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.