R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Article Archive > Ezonemag Archive > Extreme Flight Yak 54 68inch ARF Electrified Conversion Review! > Extreme Flight Yak 54 68inch ARF Electrified Conversion Review!
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

I cut cooling air exits out the aft fuselage belly to allow air to escape.

30.jpg - 20.3 KB - Views: 123
Posted by: Steve H. on Jul 19, 2006 06:47 AM
I cut cooling air exits out the aft fuselage belly to allow air to escape.
 
26.jpg
I added an air scoop to the top of the motor box to force cooling over the batteries.
<<
27.jpg
The air scoop's front end.
<
30.jpg
*
28.jpg
The battery tray involved nothing more than gluing a couple hardwood pieces across the fuse and a lite ply tray cut out and epoxied to them. I also added a couple screws to make sure it wouldn't come loose.
>
36.jpg
Taller gear
>>

« Previous 5 Attachments | Next 5 Attachments »


All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.