| RCCars | Crack Roll | Flying Giants | RC Power | The E Zone | Lift Zone | Our Sponsors | |||||||||
|
||||||||
|
|
I soldered the JETI 90 amp ESC to the motor and mounted it on the side of the motor box with three screws.
<<
|
UBEC wiring diagram...I also added a high voltage UBEC, wired to the ESC to power the radio components.
<
|
*
|
The air scoop's front end.
>
|
I cut cooling air exits out the aft fuselage belly to allow air to escape.
>>
|