|
RCCars | |
Crack Roll | |
Flying Giants | |
RC Power | |
The E Zone | |
Lift Zone | |
Our Sponsors | |
|
|
|||||||||||||||
|
||||||||
|
Motor mounted with 8-32 bolts from inside the firewall.
<<
|
Spacing out the motor...the manual called for 3/4" in front of hte cowl to increase prop efficiency. (This is done on the full-scale yak as well!)
<
|
*
|
I soldered the JETI 90 amp ESC to the motor and mounted it on the side of the motor box with three screws.
>
|
UBEC wiring diagram...I also added a high voltage UBEC, wired to the ESC to power the radio components.
>>
|
