R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Article Archive > Ezonemag Archive > Extreme Flight Yak 54 68inch ARF Electrified Conversion Review! > Extreme Flight Yak 54 68inch ARF Electrified Conversion Review!
Reload this Page Attachment 23.jpg (showing 24 of total 53)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

Spacing out the motor...the manual called for 3/4" in front of hte cowl to increase prop efficiency. (This is done on the full-scale yak as well!)

23.jpg - 30.1 KB - Views: 125
Posted by: Steve H. on Jul 19, 2006 06:47 AM
Spacing out the motor...the manual called for 3/4
 
22.jpg
Finding center for the motor before drilling.
<<
 		21.jpg
Motor mounted with 8-32 bolts from inside the firewall.
<
 		23.jpg
*
 24.jpg
Another view
>
 		25.jpg
I soldered the JETI 90 amp ESC to the motor and mounted it on the side of the motor box with three screws.
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.