The complete kit contents, including all the foam, the carbon fiber, wheels and interesting wheel pant design (more on that later).

LOOK AT THAT PRINTING!

*

The trailing edge spar had to be bowed around the back of the wing. Following the directions, I had trouble getting it to shape. ...so...I decided I needed a few extra "hands" to help get it right. BEFORE applying any, I tested my scotch tape to ensure it

By taping the spar down at various points, I found it far easier to secure properly. Any place where adhesive seeped under my tape, it did damage the print slightly, so I had to be careful of that as well.