The motor removal process was very quick and easy.

p1080808.jpg - 57.1 KB - Views: 317
Posted by: Fitz Walker on Jul 19, 2006 05:47 AM
The motor removal process was very quick and easy.
 
p1080828.jpg
Mtroniks brushless controller is of high quality. Rated for 4-10 Nickel cells or 2-4 cell LiPo.
<<
p1080824.jpg
ESC was clearly labeled and quite colorful. Note the five-pin connector. The instructions didnít seem to say much about it, but apparently it was for upgrading the firmware if ever needed.
<
p1080808.jpg
*
p1080810.jpg
Two screws were all that was needed to be removed in order to swap out the old for the new.
>
p1080815.jpg
Side-by-side comparison
>>