R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Aircraft - Sailplanes > Electric Sailplanes > Great Planes Siren Hotliner ARF Review > Great Planes Siren Hotliner ARF Review
Reload this Page Attachment elevatorservo.jpg (showing 16 of total 89)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

Securing the elevator servo in place

elevatorservo.jpg - 152.7 KB - Views: 1,694
Posted by: Andy W on Jul 19, 2006 06:47 AM
Securing the elevator servo in place
 
trimscrews.jpg
The control horn screws should be cut down.
<<
 		extenstion.jpg
A 12" extension is sufficient for the elevator servo
<
 		elevatorservo.jpg
*
 motor.jpg
The motor secured in place
>
 		esc.jpg
The ESC installs nicely beneath the battery tray
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.