R/C Groups RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups  


Go Back   RC Groups > Article Archive > Liftzone Archive > Gambler+ from Wright Brothers RC > Gambler+ from Wright Brothers RC
Reload this Page Attachment marked_te_filler.jpg (showing 7 of total 17)
Register Blogs Classifieds Clubs Members Regions Mark Forums Read

Note the pencil mark indicating where to cut the TE.

marked_te_filler.jpg - 64.9 KB - Views: 275
Posted by: Mitch G on Jul 19, 2006 06:47 AM
Note the pencil mark indicating where to cut the TE.
 
kit_contents_plans.jpg
Full Size Plans Along with the Manual (You could scratch build a second plane, if so inclined!)
<<
 		marking_te_filler.jpg
Insert TE stock into area and mark where to cut.
<
 		marked_te_filler.jpg
*
 fuselage_drying.jpg
Letting the fuselage dry.
>
 		ribs_in_place.jpg
Notice how the trailing edges are pushed to the building board and below the top of the TE stock.
>>

« Previous 5 Attachments | Next 5 Attachments »

Member Map - Contact Us - FAQ - Upgraded Membership - Arcade - Archive - Top

All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.