Finished plane ready to fly. Because of short wire lengths I couldn't mount the speed controller as shown in the instructions.

finishedplane1.jpg - 52.4 KB - Views: 718
Posted by: Michael Heer on Jul 19, 2006 05:47 AM
Finished plane ready to fly. Because of short wire lengths I couldn't mount the speed controller as shown in the instructions.
 
elevatorcontrolrod.jpg
Elevator control rod in center of fuselage runs from servo under wing out to the canard.
<<
wires.jpg
The pilot helps hide some of the wires and I used brown tape to hide and secure the receiver and wires in the receiver box.
<
finishedplane1.jpg
*
finish1.jpg
At the field ready for the first flight.
>
finish2.jpg
I added .2 ounces under the battery to balance at the field for an all up weight of 12.6 ounces.
>>