Elevator control rod in center of fuselage runs from servo under wing out to the canard.

elevatorcontrolrod.jpg - 43.8 KB - Views: 585
Posted by: Michael Heer on Jul 19, 2006 05:47 AM
Elevator control rod in center of fuselage runs from servo under wing out to the canard.
 
servobellcranks.jpg
All wires now installed correctly and Vs bent to get the ailerons to neutral.
<<
elevator2.jpg
Crosspiece connects split elevators and it is connected to the servo back under the wing.
<
elevatorcontrolrod.jpg
*
wires.jpg
The pilot helps hide some of the wires and I used brown tape to hide and secure the receiver and wires in the receiver box.
>
finishedplane1.jpg
Finished plane ready to fly. Because of short wire lengths I couldn't mount the speed controller as shown in the instructions.
>>